Pipe Fittings
SharkBite 1/2″ Push-to-Connect Brass Repair Coupling
SharkBite Push-to-Connect Repair Coupling For Copper Pipe
- Repair copper pipe easily. 1 end of coupling does not have a stop, which allows you to slide coupling onto the pipe and then slide back to cover where the pipe is cut out.
- Brass push fitting.
- The fitting should be used with copper only and is rated at 200 F., 200 P.S.I.
- It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall.
- Fittings are removable and reusable.
- The product is individually bagged.
- 1/2 In.
SharkBite 1/2″ Push-to-Connect Straight Brass Coupling
SharkBite Push-to-Connect Straight Brass Coupling
- Coupling.
- Brass push fitting - no soldering, clamps, unions or glue required.
- UPC, IAPMO, and NSF-61 certified and approved.
- It is made of 1-piece DZR brass.
- The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F (degree Fahrenheit), 200 psi.
- Designed for potable water and radiant heating.
- Fittings can be buried and placed behind drywall.
- Fittings are removable (with a disconnect clip) and reusable.
- The product is individually bagged.
- 1/2 Inch.
SharkBite 1/2″ x 1/2″ MNPT Push-to-Connect Male Adapter
SharkBite Push-to-Connect Brass Male Adapter
- Male iron pipe end.
- Brass push fitting - no solder, glue, unions, or tools required.
- The fitting can be used with copper, PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride) and is rated at 200 F (degree Farhenheit), 200 psi (pounds per square inch).
- It is made of 1-piece DZR brass.
- Fittings can be buried and placed behind drywall.
- Fittings are removable (with a disconnect clip) and reusable.
- The product is individually bagged.
- 1/2 In. x 1/2 In. MNPT.
SharkBite 1/2″ x 1/2″ Push-to-Connect Brass Elbow (1/4 Bend)
SharkBite Push-to-Connect 90 Deg. Brass Elbow (Push x Push)
- Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved.
- The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI.
- It is made of 1-piece DZR brass.
- Fittings can be buried and placed behind drywall.
- Fittings are removable and reusable.
- The product is individually bagged.
- 1/2 In. x 1/2 In. 90 Deg.
SharkBite 1/2″ x 1/2″ Push-to-Connect Brass Elbow (1/4 Bend)
SharkBite Push-to-Connect Brass Elbow (Push x FIP)
- Sharkbite push-fit x FNPT lead-free brass elbow used to make a 90 transition between PEX, copper, CPVC, PE-RT, or HDPE pipe to an FNPT threaded connection.
- The innovative push-to-connect design makes for a quick and easy transition between PEX, copper, CPVC, PE-RT, or HDPE pipe to an FNPT threaded connection.
- Ideal for working in tight spaces.
- Faster install time and ease of use reduce installation errors.
- 1/2 In. x 1/2 In.
SharkBite 1/2″ x 1/2″ Push-to-Connect Conversion Coupling
SharkBite Push-to-Connect Polybutylene Conversion Coupling
- The fastest, the easiest way to transition from polybutylene pipe over to PEX (Coss-linked Polyethylene), copper, CPVC (Chlorinated Polyvinyl Chloride), and PE-RT - wet or dry.
- Approved to be used underground (wrap required in burial installation) and behind walls without access panels.
- Fittings are certified to 200 psi and 200 F (93 C).
- The fitting has color-coordinated collars on each end to identify which side goes with which pipe.
- 1/2 In. x 1/2 In.
SharkBite 1/2″ x 1/2″ x 1/2″ Brass Push-to-Connect Tee
SharkBite Brass Push-to-Connect Tee
- Brass push fitting - no soldering, clamps, unions or glue required.
- The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI.
- It is made of 1-piece DZR brass.
- Fittings can be buried and placed behind drywall.
- Fittings are removable (with a disconnect clip) and reusable.
- The product is individually bagged.
- 1/2 In. x 1/2 In. x 1/2 In.
SharkBite 1/2″ x 3/4″ Push-to-Connect Female Adapter
SharkBite Push-to-Connect Brass Female Adapter
- Female iron pipe end.
- Brass push fitting - no solder, glue, unions, or tools required.
- UPC, IAPMO, and NSF-61 certified and approved.
- Fittings are removable (with a disconnect clip) and reusable.
- The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 P.S.I.
- It is made of 1-piece DZR brass.
- Fittings can be buried and placed behind drywall.
- The product is individually bagged.
- 1/2 In. x 3/4 In. FNPT.
Sharkbite 1/2″ x 3/4″ Push-to-Connect Male Adapter
SharkBite Push-to-Connect Brass Male Adapter
- Male iron pipe end.
- Brass push fitting - no solder, glue, unions, or tools required.
- The fitting can be used with copper, PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride) and is rated at 200 F (degree Farhenheit), 200 psi (pounds per square inch).
- It is made of 1-piece DZR brass.
- Fittings can be buried and placed behind drywall.
- Fittings are removable (with a disconnect clip) and reusable.
- The product is individually bagged.
- 1/2 In. x 3/4 In.
SharkBite 3/4 In. Push-to-Connect Brass Repair Coupling
SharkBite Push-to-Connect Repair Coupling For Copper Pipe
- Repair copper pipe easily.
- 1 end of coupling does not have a stop, which allows you to slide coupling onto the pipe and then slide back to cover where the pipe is cut out.
- Brass push fitting.
- The fitting should be used with copper only and is rated at 200 F., 200 P.S.I. It is made of 1-piece DZR brass.
- Fittings can be buried and placed behind drywall.
- Fittings are removable and reusable.
- The product is individually bagged.
- 3/4 In.
SharkBite 3/4″ Brass Push-Fit Ball Valve
SharkBite Brass Push-Fit Ball Valve. Brass ball valve with push fitting connections.
- UPC, IAPMO, and NSF-61 certified and approved.
- The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI.
- It is made of 1-piece DZR brass.
- Fittings can be buried and placed behind drywall.
- Fittings are removable and reusable.
- The product is individually bagged.
- 3/4 Inch.
SharkBite 3/4″ Push-to-Connect Brass End Push Cap
SharkBite Push-to-Connect Brass End Cap
- Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved.
- The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI.
- It is made of 1-piece DZR brass.
- Fittings can be buried and placed behind drywall.
- Fittings are removeable and reuseable.
- The product is individually bagged.
- 3/4 In.
SharkBite 3/4″ x 1/2″ MNPT Bullnose Push-to-Connect Male Adapter
SharkBite Push-to-Connect Brass Male Adapter
- Male iron pipe end.
- Brass push fitting - no solder, glue, unions, or tools required.
- The fitting can be used with copper, PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride) and is rated at 200 F (degree Farhenheit), 200 psi (pounds per square inch).
- It is made of 1-piece DZR brass.
- Fittings can be buried and placed behind drywall.
- Fittings are removable (with a disconnect clip) and reusable.
- 3/4 In. x 1/2 In. MNPT.
SharkBite 3/4″ x 3/4″ FNPT Push-to-Connect Female Adapter
SharkBite Push-to-Connect Brass Female Adapter
- Female iron pipe end.
- Brass push fitting - no solder, glue, unions, or tools required.
- UPC, IAPMO, and NSF-61 certified and approved.
- Fittings are removable (with a disconnect clip) and reusable.
- The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 P.S.I.
- It is made of 1-piece DZR brass.
- Fittings can be buried and placed behind drywall.
- The product is individually bagged.
- 3/4 In. x 3/4 In. FNPT.
SharkBite 3/4″ x 3/4″ MNPT Push-to-Connect Male Adapter
SharkBite Push-to-Connect Brass Male Adapter
- Male iron pipe end. Brass push fitting - no solder, glue, unions, or tools required.
- The fitting can be used with copper, PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride) and is rated at 200 F (degree Farhenheit), 200 psi (pounds per square inch).
- It is made of 1-piece DZR brass.
- Fittings can be buried and placed behind drywall.
- Fittings are removable (with a disconnect clip) and reusable.
- The product is individually bagged.
- 3/4 In. x 3/4 In. MNPT.
SharkBite 3/4″ x 3/4″ Push-to-Connect Brass Elbow (1/4 Bend)
SharkBite Push-to-Connect 90 Deg. Brass Elbow (Push x Push)
- Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved.
- The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI.
- It is made of 1-piece DZR brass.
- Fittings can be buried and placed behind drywall.
- Fittings are removable and reusable.
- The product is individually bagged.
- 3/4 In. x 3/4 In. 90 Deg.
SharkBite 3/4″ x 3/4″ Push-to-Connect Conversion Coupling
SharkBite Push-to-Connect Polybutylene Conversion Coupling
- The fastest, easiest way to transition from polybutylene pipe over to PEX (Coss-linked Polyethylene), copper, CPVC (Chlorinated Polyvinyl Chloride), and PE-RT - wet or dry.
- Approved to be used underground (wrap required in burial installation) and behind walls without access panels.
- Fittings are certified to 200 psi and 200 F (93 C).
- The fitting has color-coordinated collars on each end to identify which side goes with which pipe.
- 3/4 In. x 3/4 In.
SharkBite 3/4″ x 3/4″ x 3/4″ Brass Push-to-Connect Tee
SharkBite Brass Push-to-Connect Tee
- Brass push fitting - no soldering, clamps, unions or glue required. UPC, IAPMO, and NSF-61 certified and approved.
- The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI.
- It is made of 1-piece DZR brass.
- Fittings can be buried and placed behind drywall.
- Fittings are removable (with a disconnect clip) and reusable.
- The product is individually bagged.
- 3/4 In. x 3/4 In. x 3/4 In.
SharkBite EvoPex 1/2 Inch Push-To-Connect Plastic Cap
SharkBite EvoPex stops are the easiest way to cap off PEX tubing lines. This push-to-connect fitting is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Designed to make PEX-to-PEX connections in potable water and radiant heating applications
- Approved for underground and behind-the-wall applications with no access panels
- Green visual indicator shows PEX pipe is inserted to the proper depth
SharkBite EvoPex 1/2 x 1/2 Inch Bend Push-To-Connect Plastic Elbow
This push-to-connect elbow fitting is designed to make leak-free PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Elbow fitting is designed to make leak-free PEX-to-PEX connections
- No soldering, clamps, unions or glue are required
- Push-to-connect elbow fitting
- 1/2 x 1/2 Inch
SharkBite EvoPex 1/2 x 1/2 Inch Bend Push-To-Connect Plastic Elbow 6Pk
This push-to-connect elbow fitting is designed to make leak-free PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Elbow fitting is designed to make leak-free PEX-to-PEX connections
- No soldering, clamps, unions or glue are required
- Push-to-connect elbow fitting
- 1/2 x 1/2 Inch
- 6 Pack