Showing all 36 results

Show sidebar
Show 24 36 48
1-1/4IN CUTOFF WHEEL
Compare

1-1/4IN CUTOFF WHEEL

$125.00 TTD
Reinforced with fiberglass for increased durability and used for cutting metal, including hardened steel. Ideal for cutting, grooving and trimming all kinds of metal.
  • May also be used on thin wood, plastics, and ceramics.
Add to wishlist
Add to cart
Quick view
1/2IN DRUM SANDER
Compare

1/2IN DRUM SANDER

$56.00 TTD
Sanding drum mandrel holds a sanding band covered with aluminum oxide abrasive. For rough shaping and smoothing wood and fiberglass, removing rust from metal surfaces, and shaping rubber surfaces.
  • 1/8" shank.
  • Sanding bands are easily replaceable on drums.
  • Includes 1 coarse, 60 grit sanding band.
Add to wishlist
Add to cart
Quick view
113 ENGRAVING CUTTER
Compare

113 ENGRAVING CUTTER

$41.00 TTD
Ideal for engraving, carving, routing in wood, fibre, plastic and soft materials - everything except hardened materials.
  • All have 1/8" shanks.
Add to wishlist
Add to cart
Quick view
196 2PK HS STEEL CUTTER
Compare

196 2PK HS STEEL CUTTER

$91.13 TTD
Can be used for shaping, hollowing most metals, plastics, and wood.
  • Made of high-quality steel.
Add to wishlist
Add to cart
Quick view
2PK ALUM OXI GRIND STN
Compare

2PK ALUM OXI GRIND STN

$60.00 TTD
Highest industrial quality for extended general-purpose grinding and long abrasive life on meals, castings, welded joints, rivets and rust. For use on most materials including stainless steel.
  • Specially designed for working with conic surfaces.
  • All have 1/8" shanks.
Add to wishlist
Add to cart
Quick view
2PK BRS WHL WIRE BRUSH
Compare

2PK BRS WHL WIRE BRUSH

$75.00 TTD
Small versatile brass brushes for efficiently removing rust and corrosion, and polishing metal surfaces. Non-sparking and softer than steel.
  • Will not scratch softer metals.
  • 1/8 In. (inch) shank.
Add to wishlist
Add to cart
Quick view
2PK CARBIDE GRIND STONE
Compare

2PK CARBIDE GRIND STONE

$62.01 TTD
Made especially for grinding on hard steel, ceramics, glass, and other hard materials.
  • All have 1/8" shank.
Add to wishlist
Add to cart
Quick view
2PK ENGRAVING CUTTER
Compare

2PK ENGRAVING CUTTER

$46.00 TTD
Ideal for engraving, carving, routing in wood, fibre, plastic and soft materials - everything except hardened materials.
  • All have 1/8" shanks.
Add to wishlist
Add to cart
Quick view
2PK ENGRAVING CUTTER
Compare

2PK ENGRAVING CUTTER

$48.38 TTD
Ideal for engraving, carving, routing in wood, fibre, plastic and soft materials - everything except hardened materials.
  • All have 1/8" shanks.
Add to wishlist
Add to cart
Quick view
2PK HS STEEL CUTTER
Compare

2PK HS STEEL CUTTER

$85.01 TTD
Can be used for shaping, hollowing most metals, plastics, and wood.
  • Made of high-quality steel.
Add to wishlist
Add to cart
Quick view
2PK HS STEEL CUTTER
Compare

2PK HS STEEL CUTTER

$92.25 TTD
Can be used for shaping, hollowing most metals, plastics, and wood.
  • Made of high-quality steel.
Add to wishlist
Add to cart
Quick view
3/8IN 80GRIT FLAP WHEEL
Compare

3/8IN 80GRIT FLAP WHEEL

$83.00 TTD
For use with rotary tools to grind and polish flat or contoured surfaces. Used most effectively as a finishing sander after heavier surface sanding and material removal is completed.
  • Aluminum oxide.
  • 1/8" shank.
Add to wishlist
Add to cart
Quick view
5/8INDIA GRINDING STONE
Compare

5/8INDIA GRINDING STONE

$40.01 TTD
Highest industrial quality for extended general-purpose grinding and long abrasive life on meals, castings, welded joints, rivets and rust.
  • Specially designed for working with conic surfaces.
  • All have 1/8" shanks.
Add to wishlist
Add to cart
Quick view
543 CUT/SHAPE WHEEL
Compare

543 CUT/SHAPE WHEEL

$207.00 TTD
For shaping and cutting wood, plastic, fiberglass, and laminates. Cut-off wheels make it easy to cut or shape thin wood and plastic. Coated on both sides, so it cuts and finishes in one operation.
  • Mandrel included.
  • Do not use on metal.
Add to wishlist
Add to cart
Quick view
650 1/8IN STRAIGHT ROUTER BIT
Compare

650 1/8IN STRAIGHT ROUTER BIT

$93.00 TTD
For routing, inlaying, mortising in woods and other soft materials.
  • 1/8" shank.
Add to wishlist
Add to cart
Quick view
7/32IN CHAIN SAW STONE
Compare

7/32IN CHAIN SAW STONE

$55.00 TTD
Precision ground for quick and easy chain sharpening.
  • 1/8" shank.
  • 2 per card.
Add to wishlist
Add to cart
Quick view
8215 1INDIA GRINDING STONE
Compare

8215 1INDIA GRINDING STONE

$34.00 TTD
Highest industrial quality for extended general-purpose grinding and long abrasive life on meals, castings, welded joints, rivets and rust.
  • Specially designed for working with conic surfaces.
  • All have 1/8" shanks.
Add to wishlist
Add to cart
Quick view
932 ALUM OXID GRINDING STONE
Compare

932 ALUM OXID GRINDING STONE

$32.00 TTD
Highest industrial quality for extended general-purpose grinding and long abrasive life on meals, castings, welded joints, rivets and rust. For use on most materials including stainless steel. Specially designed for working with conic surfaces.
  • All have 1/8" shanks.
Add to wishlist
Add to cart
Quick view
ALUM OXID GRIND STONE
Compare

ALUM OXID GRIND STONE

$40.01 TTD
Highest industrial quality for extended general-purpose grinding and long abrasive life on meals, castings, welded joints, rivets and rust. For use on most materials including stainless steel. Specially designed for working with conic surfaces.
  • All have 1/8" shanks.
Add to wishlist
Add to cart
Quick view
CARBIDE GRINDING STONE
Compare

CARBIDE GRINDING STONE

$40.01 TTD
Made especially for grinding on hard steel, ceramics, glass, and other hard materials.
  • All have 1/8" shank.
Add to wishlist
Add to cart
Quick view
CARBIDE GRINDING STONE
Compare

CARBIDE GRINDING STONE

$40.01 TTD
Made especially for grinding on hard steel, ceramics, glass, and other hard materials.
  • All have 1/8" shank.
Add to wishlist
Add to cart
Quick view
Dremel 1/4 In. 60 Coarse Drum Sander Band
Compare

Dremel 1/4 In. 60 Coarse Drum Sander Band

$35.00 TTD
For shaping and smoothing wood and fiberglass. Removes rust from metal surfaces. Shapes rubber surfaces.
Add to wishlist
Add to cart
Quick view
Dremel 1/4 In. Drum Sander Mandrel
Compare

Dremel 1/4 In. Drum Sander Mandrel

$41.00 TTD
Sanding drum mandrel holds a sanding band covered with aluminum oxide abrasive. For rough shaping and smoothing wood and fiberglass, removing rust from metal surfaces, and shaping rubber surfaces.
Add to wishlist
Add to cart
Quick view
Dremel 1/4 In. Straight Router Bit
Compare

Dremel 1/4 In. Straight Router Bit

$96.00 TTD
For routing, inlaying, mortising in woods and other soft materials. 1/8" shank.
Add to wishlist
Add to cart
Quick view
Dremel 1/8 In. Tungsten Carbide Cutting Bit
Compare

Dremel 1/8 In. Tungsten Carbide Cutting Bit

$115.00 TTD
Use on hardened steel, fired ceramics and other hard materials. 1/8" maximum cutting head. 1/8" shank.
Add to wishlist
Add to cart
Quick view
Dremel 1/8 Inch Tungsten Carbide Cutting Bit
Compare

Dremel 1/8 Inch Tungsten Carbide Cutting Bit

$115.00 TTD
Use on hardened steel, fired ceramics and other hard materials. 1/8 Inch maximum cutting head. 1/8 Inch shank.
  • Use on hardened steel, fired ceramics and other hard materials
  • Made of  Tungsten carbide
  • 1/8 Inch shank
Add to wishlist
Add to cart
Quick view
Dremel Quick Change Rotary Tool Collet Nut Set
Compare

Dremel Quick Change Rotary Tool Collet Nut Set

$115.00 TTD
Dremel Quick Change Rotary Tool Collet Nut Set Changes bits quickly without the use of a wrench. Provides better visibility of the workpiece. For use with all moto-tools. Includes collet nut and 1/8", 3/32", 1/16", and 1/32" collets.
Add to wishlist
Add to cart
Quick view
DRYWALL CUTTING BIT
Compare

DRYWALL CUTTING BIT

$32.63 TTD
Drywall bit that makes fast, clean cuts. High-speed drywall cutting bit features a 1/8" steel shank and a piloted tip for easy cutting around outlet and switch boxes.
  • Ideal for cutting drywall for electrical boxes, air vents and other wall features.
Add to wishlist
Add to cart
Quick view
Emery 1 In. Felt Polishing Wheel (2-Pack)
Compare

Emery 1 In. Felt Polishing Wheel (2-Pack)

$43.00 TTD
The felt polishing point is made to take a semi-rough finish and polish it to a smooth finish. Ideal for general polishing of most ferrous metals, stones, glass and ceramics. Perfect for general polishing of most ferrous metals, stones, glass and ceramics.
Add to wishlist
Add to cart
Quick view
Emery 1/2 In. Felt Polishing Wheel
Compare

Emery 1/2 In. Felt Polishing Wheel

$33.00 TTD
The felt polishing point is made to take a semi-rough finish and polish it to a smooth finish. Ideal for general polishing of most ferrous metals, stones, glass and ceramics.  Perfect for general polishing of most ferrous metals, stones, glass and ceramics.
Add to wishlist
Add to cart
Quick view
EZ LOCK ABRASIVE WHEEL
Compare

EZ LOCK ABRASIVE WHEEL

$49.01 TTD
For use with the Dremel EZ Lock system. Great for cleaning and light sanding.
Add to wishlist
Add to cart
Quick view
EZ LOCK CLOTH WHEEL
Compare

EZ LOCK CLOTH WHEEL

$35.00 TTD
Dremel EZ lock makes accessory changes easy as pull, twist, release. One-piece mandrel design simplifies the process of changing accessories. For polishing all metals and plastics.
  • 1 In. (inch) diameter.
  • For use EZ Lock Mandrel or Standard Mandrel.
Add to wishlist
Add to cart
Quick view
FELT POLISHING TIP
Compare

FELT POLISHING TIP

$33.00 TTD
The felt polishing point is made to take a semi-rough finish and polish it to a smooth finish. Ideal for general polishing of most ferrous metals, stones, glass and ceramics.
  • Ideal for polishing in corners and hard-to-get-at places.
  • Fits mandrel Model No. 401.
Add to wishlist
Add to cart
Quick view
Gator Blade Straight Cup 3/4 x 3/4 Inch Grind Stone
Compare

Gator Blade Straight Cup 3/4 x 3/4 Inch Grind Stone

$25.00 TTD
Industrial quality aluminum oxide mounted stones in the most popular shapes. All feature a 1/4 inch shank. Perfect for deburring pipe, grinding recessed areas, and other special grinding jobs. Can be used on electric drills and die grinders.1 per card.
  • Quality aluminum oxide mounted stone
  • Shank diameter 1/4 inch
  • Size 3/4 x 3/4 inch
  • Used on electric drills and die grinders
Add to wishlist
Add to cart
Quick view
HIGH SPEED STEEL CUTTER
Compare

HIGH SPEED STEEL CUTTER

$80.00 TTD
Can be used for shaping, hollowing most metals, plastics, and wood.
  • Made of high-quality steel.
Add to wishlist
Add to cart
Quick view
TILE CUTTING BIT
Compare

TILE CUTTING BIT

$144.00 TTD
Cuts wood, plastic, fiberglass, drywall, laminate, aluminum, and vinyl siding.
  • 1/8" steel shank.
  • Carded.
Add to wishlist
Add to cart
Quick view