Show sidebar
Show 24 36 48
Compare

Milton 1/4 In. FNPT 150 psi Straight Foot Dual Head with Extended Reach Air Chuck

$260.00 TTD
Milton Straight Foot Dual Head Air Chuck 1/4 In. female national pipe thread, designed and manufactured to exacting standards. Maximum air pressure of 150 pounds per square inch. Both ends lock on valve core threads. Not for use with an inflator/pressure gauge.
Add to wishlist
Add to cart
Quick view
Compare

Tru-Flate 1/4 In. Brass Hose Splicer

$23.00 TTD
Tru-Flate Brass Hose Splicer
  • Splicer has a Barb-type hose and is precision machined to high-quality standards.
  • Constructed of brass to resist rust and corrosion.
  • 1/4 In.
Add to wishlist
Add to cart
Quick view
Compare

Tru-Flate 1/4 In. MNPT T-Style Steel Plug

$20.00 TTD
Tru-Flate design coupler plug.
  • Short plug pilot, with a wide metal section between the ball groove and the pilot.
  • Thick sealing surface for longer seal life.
  • 1/4 In. MNPT.
Add to wishlist
Add to cart
Quick view
Compare

Tru-Flate 1/4 Inch NPT Air Line Drain Cock

$38.00 TTD
For use in low pressure applications. Hand-tightening provides a leak-proof seal. All brass, corrosion resistant material.
  • For use in low pressure applications
  • 1/4 Inch NPT
  • All brass
Add to wishlist
Add to cart
Quick view
Compare

Tru-Flate 1/8 Inch NPT Air Line Drain Cock

$26.00 TTD
For use in low pressure applications. Hand-tightening provides a leak-proof seal. All brass, corrosion resistant material.
  • For use in low pressure applications
  • 1/8 Inch NPT
  • All brass
Add to wishlist
Add to cart
Quick view
Compare

Tru-Flate 135 PSI 1/4 In. Blow Gun with Extension

$125.00 TTD
Tru-Flate Safety Blow Gun with Extension
  • Lever-type with 4" vented extension.
  • Meets all related OSHA requirements.
  • Tamper-proof pressure reducers.
  • Die-cast body with hang-up hook.
  • 135 P.S.I. 1/4" Female NPT inlet.
  • 1 per card.
Add to wishlist
Add to cart
Quick view
Compare

Tru-Flate 3/8 In. Barb 1/4 In. MNPT Brass Hose End

$23.00 TTD
Tru-Flate Barb-Type Hose End All brass - will not rust or corrode. Use with hose clamps or ferrules. 1 per card.
Add to wishlist
Add to cart
Quick view
Compare

Tru-Flate 3/8 In. Brass Hose Splicer

$26.00 TTD
Tru-Flate Brass Hose Splicer
  • Splicer has a Barb-type hose and is precision machined to high-quality standards.
  • Constructed of brass to resist rust and corrosion.
  • 3/8 In.
Add to wishlist
Add to cart
Quick view
Compare

Tru-Flate 32 tpi Chuck Clip

$59.00 TTD
Tru-Flate Snap-On Chuck Clip
  • Snap-on chuck clip converts any single foot chuck to a clip-on chuck.
  • Holds chuck to tire valve while inflating.
  • Fits all standard ball foot chucks with .672-32 thread.
Add to wishlist
Add to cart
Quick view
Compare

Tru-Flate ARO 1/4 In. MNPT A-Style Steel Plug

$20.00 TTD
Tru-Flates ARO design coupler plug.
  • Similar appearance compared to the industrial interchange.
  • 1/4 In. MNPT.
Add to wishlist
Add to cart
Quick view
Compare

Tru-Flate ARO Series Push-to-Connect 1/4″ FNPT Coupler

$92.00 TTD
Air line coupler features 100% air-tight seal, accidental disconnect protection, and tubular valve construction which promotes greater air flow.
  • Aro Female Coupler
  • 100% air-tight seal
  • Accidental disconnect protection
  • Tubular valve construction which promotes greater air flow
  • Size: 1/4" FNPT
Add to wishlist
Add to cart
Quick view
Compare

Tru-Flate Ball Foot Air Chuck with Barb

$42.00 TTD
Tru-Flate Ball Foot Air Chuck w/Barb
  • Use when air supply lines come directly from the compressor with no other valve in the line.
  • Comes with a built-in shut-off valve and therefore cannot be used on inflator gauges.
  • Combination 1/4" Female NPT chuck with 1/4" I.D. hose barb.
  • 150 P.S.I. maximum air line pressure.
Add to wishlist
Add to cart
Quick view
Compare

Tru-Flate Female 1/4 In. FNPT Brass Coupler

$24.19 TTD
Tru-Flate Female Coupling
  • Thread size: 1/4" Female NPT x 1/4" Female NPT.
  • Brass.
  • 1 per card.
Add to wishlist
Add to cart
Quick view
Compare

Tru-Flate Industrial/Milton 1/4 Inch FNPT Steel Industrial Plug

$18.00 TTD
Industrial Milton design coupler plug. This plug design is considered the industrial standard. Can be identified by the 3/16 Inch pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
  • Industrial Milton design
  • Conforms to ANSI (NFPA) T3.20.14-1990 dimensions
  • 3/16 Inch pilot and flat bottom V-shaped ball groove
Add to wishlist
Add to cart
Quick view
Compare

Tru-Flate Industrial/Milton 1/4 Inch MNPT Steel Industrial Plug

$18.00 TTD
Industrial Milton design coupler plug. This plug design is considered the industrial standard. Can be identified by the 3/16 inch pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions. 1/4 inch MNPT (Male National Pipe Thread).
  • 1/4 inch MNPT
  • Steel coupler plug
  • Standard industrial design
  • Flat bottom V-shaped ball groove
Add to wishlist
Add to cart
Quick view
Compare

Tru-Flate Industrial/Milton 1/4 Inch MNPT Steel Industrial Plug

$33.75 TTD
Industrial Milton design coupler plug. This plug design is considered the industrial standard. Can be identified by the 3/16 Inch pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
  • 3/16 Inch pilot and flat bottom V-shaped ball groove
  • Industrial standard
  • 1/4 Inch MNPT
Add to wishlist
Add to cart
Quick view
Compare

Tru-Flate Industrial/Milton 3/8 In. FNPT Steel Industrial Plug

$32.00 TTD
Industrial Milton design coupler plug.
  • This plug design is considered the industrial standard.
  • Can be identified by the 3/16 In. pilot and flat bottom V-shaped ball groove.
  • Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
  • Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
  • 3/8 In. FNPT.
Add to wishlist
Add to cart
Quick view
Compare

Tru-Flate Industrial/Milton 3/8 In. MNPT Steel Industrial Plug

$31.01 TTD
Industrial Milton design coupler plug.
  • This plug design is considered the industrial standard.
  • Can be identified by the 3/16 In. pilot and flat bottom V-shaped ball groove.
  • Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
  • Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
  • 3/8 In. MNPT.
Add to wishlist
Add to cart
Quick view
Compare

Tru-Flate Industrial/Milton 3/8 Inch FNPT Steel Industrial Plug

$36.00 TTD
Industrial Milton design coupler plug. This plug design is considered the industrial standard. Can be identified by the 3/16 In. pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
  • 3/16 Inch pilot and flat bottom V-shaped ball groove
  • Industrial standard
  • 3/8 Inch FNPT
Add to wishlist
Add to cart
Quick view
Compare

Tru-Flate Industrial/Milton 3/8 Inch MNPT Steel Industrial Plug

$35.00 TTD
Industrial Milton design coupler plug. This plug design is considered the industrial standard. Can be identified by the 3/16 Inch pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
  • 3/16 Inch pilot and flat bottom V-shaped ball groove
  • Industrial standard design
  • 3/8 Inch MNPT
Add to wishlist
Add to cart
Quick view
Compare

Tru-Flate Industrial/Milton Series Push-o-Connect 3/8 Inch FNPT Coupler

$100.00 TTD
The air line coupler features a 100% air-tight seal, accidental disconnect protection and tubular valve construction which promotes greater air flow.
  • Coupler features a 100% air-tight seal
  • Promotes greater air flow
  • 3/8 Inch FNPT
Add to wishlist
Add to cart
Quick view
Compare

Tru-Flate Industrial/Milton Series Push-to-Connect 3/8 In. FNPT Coupler

$142.00 TTD
Tru-Flate 3/8" Body Series Coupler
  • Air line coupler features 100% air-tight seal, accidental disconnect protection, and tubular valve construction which promotes greater air flow.
  • 3/8 In. FNPT.
Add to wishlist
Add to cart
Quick view
Compare

Tru-Flate Industrial/Milton Series Push-To-Connect 3/8 Inch MNPT Coupler

$102.00 TTD
Air line coupler features 100% air-tight seal, accidental disconnect protection and tubular valve construction which promotes greater air flow.
  • Features 100% air-tight seal
  • Push-To-Connect
  • 3/8 Inch MNPT
Add to wishlist
Add to cart
Quick view
Compare

Tru-Flate Series Push-to-Connect 1/4 In. MNPT Coupler

$72.00 TTD
Tru-Flate 1/4" Body Series Coupler
  • Air line coupler features 100% air-tight seal, accidental disconnect protection, and tubular valve construction which promotes greater airflow.
  • 1/4 In. MNPT.
Add to wishlist
Add to cart
Quick view