Showing all 15 results

9.5IN CRIMP&CUT PLIER

$260.00 TTD
Designed for crimping of both insulated and non-insulated solderless connections and terminals on 10 to 22 AWG wire. Slim nose shape for tight places.
  • Channellock Blue comfort-grips.
  • 9-1/2-inch.

Bussmann Plastic 3 In. Fuse Puller

$67.50 TTD
Heavy-duty cartridge fuse puller that safely removes fuses from fuse blocks.
  • Fits fuses from 1A to 60A.
  • Constructed of blue molded plastic.
  • 1/2 In. W. x 3 In. L.

Do it 6 Ga. to 14 Ga. Zinc-Plated Cable Ripper

$20.25 TTD
Cable ripper and wire gauge. Slits outer covering of Romex (all sizes) and other nonmetallic (type NM) sheathed cable. Nickle-plated finish resists corrosion.
  • Wire gauge goes from 6 to 14. 3-3/4 In. long.

Do it 8 In. Solid/Stranded Carbon Steel Coaxial Crimping Tool

$115.00 TTD
Crimping and stripping tool allows for easy installation of 75 ohm plugs onto coaxial cable. Tool gives sturdy, lasting connection of plug onto wire.
  • Size: 8 In
 

Do it Best 9-1/2 In. Carbon Steel Cutting & Crimping Tool

$145.00 TTD
Designed for cutting and crimping of insulated and non-insulated solderless connectors and terminals.
  • 9-1/2-inch.

Gardner Bender 80V to 140V Circuit Breaker Finder

$420.00 TTD
Simply plug the transmitter into a wall outlet on the circuit you are trying to locate, then run the receiver over the circuit breakers or fuses in your load center. Receiver will beep and flash when the correct circuit is located.
  • Locates AC circuits quickly and easily.
  • No need to interrupt power.

Gardner Bender Analog 5-Function Analog Multimeter

$174.99 TTD
Pocket size analog tester. 5-function, 12 range analog multimeter. 13-position rotary dial, and zero ohms adjustment dial. Easy-to-read color-coded analog scale. Other features include replaceable test leads, calibration screw, fuse, and diode protected with spare fuse included. Tests voltage, DC voltage, DC current, resistance, Continuity, and batteries. DC Voltage: 10, 50, 250, 500V, AC voltage: 10, 50, 250, 500V, DC current: 0.5m, 50m, 250m, A, Resistance: 1M. Decibels: -20dB to 56dB on AC V ranges. Tri-lingual instruction manual.
  • Manual range selection includes a zero ohms adjustment dial
  • Easy to read, color-coded displays. Tests DC/AC V, DC current and resistance
  • Includes test lead input icons for correct lead placement and a set of positive and negative electrical test leads
  • Agency approved with fuse overload protection circuitry incorporated
  • 13 position rotary dial

Gardner Bender Dual & Solenoid Voltage Tester

$356.00 TTD
Solenoid voltage tester tests polarity and 120/600V AC/DC. Easy-to-read voltages. Dual voltage indication: Solenoid vibration sensing and electronic neon visual indication.
  • Compact and easy to carry.
  • Case serves as prod holder for 1-hand operation.
  • UL listed.

Gardner Bender Heavy-Duty 3-Way Voltage Tester

$129.00 TTD
Heavy-duty 3-way voltage tester tests AC/DC Voltage at 120, 240 and 277V. Individual indicators for each voltage range assures reliability. 24-inch test lead is long enough for convenient testing.
  • Testing applications include outlets, panels, light fixtures, switches, circuit breakers and more.
 

Gardner Bender Non-Contact Voltage Detector

$194.00 TTD
Non-contact voltage tester audibly (beeping) and visually (flashing) indicates the presence of AC voltage from 50V to 600V. Use to locate breaks in wires and voltage at receptacles, switches and motors.
  • Built-in safe-test indicates tester and batteries are working properly.
  • Requires (1) AAA battery, not included.

Gardner Bender Ox-Gard 1 Oz. Antioxidant Compound

$39.38 TTD
Gardner Bender Ox-Gard Antioxidant Compound
  • Ox-Gard antioxidant compound penetrates aluminum oxide to maintain inter-strand and inter-conductive current paths.
  • Guards against oxidation, improves conductivity, and produce a cooler connection.
  • Excellent for AL/AL, AL/CU wire connections, and aluminum conduit joints.

Gardner Bender Plastic 8 In. Fuse Puller

$38.25 TTD
Tough insulated plastic fuse puller for 0A to 200A or 0A to 100A/600V fuses.
  • Adjusts to accommodate switch and fuse clips.

Gardner Bender Two Probe Circuit Tester

$53.00 TTD
Twin probe circuit tester for general purpose electrical testing. Tests all voltages from 80V (volts) to 250V. For use with DC motors, switches, and outlets. Neon indicator glows when voltage is present and brightens as voltage increases.
  • Features insulated housing and 2" insulated test leads for safe operation.
  • Built-in pocket clip.
  • UL (Underwriter's Laboratories) listed.

Gardner Bender UpperHand 1/8 In. W. x 65 Ft. L. Steel Fish Tape

$392.00 TTD
Standard carbon steel tapes feature the Upperhand ergonomic handle. The handle keeps the user's wrist in a normal, upright position to reduce strain and enhance productivity on the job.
  • 4 viewing ports on reel show at a glance how much tape remains.
  • Easy disassembly for fast tape replacement.

Gardner Bender UpperHand 1/8 Inch x 125 Foot Steel Fish Tape

$804.38 TTD
Standard carbon steel tapes feature the Upperhand ergonomic handle. The handle keeps the user's wrist in a normal, upright position to reduce strain and enhance productivity on the job. The red shatterproof case stands up to on-the-job abuse. 4 viewing ports on the reel show at a glance how much tape remains. Easy disassembly for fast tape replacement.
  • Features ergonomic handle
  • 4 Viewing ports on the reel
  • Carbon steel
  • 125 Foot