SharkBite 1/2″ Push-to-Connect Brass Repair Coupling
$180.00 TTD
SharkBite Push-to-Connect Repair Coupling For Copper Pipe
- Repair copper pipe easily. 1 end of coupling does not have a stop, which allows you to slide coupling onto the pipe and then slide back to cover where the pipe is cut out.
- Brass push fitting.
- The fitting should be used with copper only and is rated at 200 F., 200 P.S.I.
- It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall.
- Fittings are removable and reusable.
- The product is individually bagged.
- 1/2 In.
2 in stock
Related products
Anderson Metals 1/4 In. x 1/8 In. Threaded Reducing Brass Coupling
Low lead threaded reducing coupling. Female iron pipe X Female iron pipe. Rough brass, import. Meets following specifications: Alloy No. C84400 per ASTM B584, ANSI/ASME B16.15, ANSI B1.20.1, WW-P-460 Federal Specifications, 125 WSP, 200 WOG, California AB 1953. Vermont SB 152. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
- 1/4 x 1/8 inches Brass Coupling
- Brass
- Reducing Coupling
- Pressure rating: 200 psi up to 150 F
Anderson Metals 1/8 Inch Threaded Red Brass Coupling
Low lead threaded coupling. Female iron pipe X Female iron pipe. Rough brass, import. Meets the following specifications: Alloy No. C84400 per ASTM B584, ANSI/ASME B16.15, ANSI B1.20.1, WW-P-460 Federal Specifications, 125 WSP, 200 WOG, California AB 1953. Vermont SB 152. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
- Low lead threaded tee
- Red Brass
- 1/8 Inch
Anderson Metals 3/4 In. x 1/2 In. Threaded Reducing Brass Coupling
Low lead threaded reducing coupling. Female iron pipe X Female iron pipe. Rough brass, import. Meets following specifications: Alloy No. C84400 per ASTM B584, ANSI/ASME B16.15, ANSI B1.20.1, WW-P-460 Federal Specifications, 125 WSP, 200 WOG, California AB 1953. Vermont SB 152. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
- 3/4 x 1/2 inches Brass Coupling
- Material: Brass
- Reducing Coupling
- Pressure Rating: 200 psi up to 150 F
Anderson Metals 3/4 In. x 3/8 In. Threaded Reducing Brass Coupling
Low lead threaded reducing coupling. Female iron pipe X Female iron pipe. Rough brass, import. Meets following specifications: Alloy No. C84400 per ASTM B584, ANSI/ASME B16.15, ANSI B1.20.1, WW-P-460 Federal Specifications, 125 WSP, 200 WOG, California AB 1953. Vermont SB 152. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
- 3/4 x 3/8 Brass Coupling
- Brass
- Reducing Coupling
- Pressure Rating: 200 psi up to 150 F
SharkBite 1/2″ Push-to-Connect Straight Brass Coupling
SharkBite Push-to-Connect Straight Brass Coupling
- Coupling.
- Brass push fitting - no soldering, clamps, unions or glue required.
- UPC, IAPMO, and NSF-61 certified and approved.
- It is made of 1-piece DZR brass.
- The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F (degree Fahrenheit), 200 psi.
- Designed for potable water and radiant heating.
- Fittings can be buried and placed behind drywall.
- Fittings are removable (with a disconnect clip) and reusable.
- The product is individually bagged.
- 1/2 Inch.
SharkBite 1/2″ x 1/2″ Push-to-Connect Conversion Coupling
SharkBite Push-to-Connect Polybutylene Conversion Coupling
- The fastest, the easiest way to transition from polybutylene pipe over to PEX (Coss-linked Polyethylene), copper, CPVC (Chlorinated Polyvinyl Chloride), and PE-RT - wet or dry.
- Approved to be used underground (wrap required in burial installation) and behind walls without access panels.
- Fittings are certified to 200 psi and 200 F (93 C).
- The fitting has color-coordinated collars on each end to identify which side goes with which pipe.
- 1/2 In. x 1/2 In.
SharkBite 3/4″ x 3/4″ Push-to-Connect Conversion Coupling
SharkBite Push-to-Connect Polybutylene Conversion Coupling
- The fastest, easiest way to transition from polybutylene pipe over to PEX (Coss-linked Polyethylene), copper, CPVC (Chlorinated Polyvinyl Chloride), and PE-RT - wet or dry.
- Approved to be used underground (wrap required in burial installation) and behind walls without access panels.
- Fittings are certified to 200 psi and 200 F (93 C).
- The fitting has color-coordinated collars on each end to identify which side goes with which pipe.
- 3/4 In. x 3/4 In.