Welding Electrodes & Wire
1/8IN 1LB SS ELECTRODE
Stainless alloy "easy all steel" specialty welding electrodes are the ultimate rods for most grades of steel using any stick electrode power source. Features a superior combination of tensile strength and elongation.
- Best suited to horizontal fillet welds.
- Arc is so ionized that you cannot short it out.
1LB 1/8 7018 ELECTRODE
Suitable for all positions on hard steels where no pre-heat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod. Designed for welding low, medium, and high carbon steels as well as some higher strength low alloy steel.
- For frames, trailer hitches, and chassis.
- Features excellent restart capability.
1LB 1/8 7018AC ELECTRODE
Suitable for all positions on hard steels where no pre-heat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod.
- For frames, trailer hitches and chassis.
- AC mild steel "Low Hydrogen" welding rods easily produce quality results on smaller amperage AC/DC welders.
1LB 3/32 7018 ELECTRODE
1LB 3/32 E7014 ELCTRODE
ALUMINUM BRAZING ROD
Forney .030 Diameter 308ER Stainless Steel Mig Wire 2Lb
ER308 stainless steel MIG (GMAW) welding wire consists of 20% chromium and 10% nickel. Welds type 301, 302, 304, 308, 321 and 347 stainless steel. Applications include the food and beverage industry, maintenance and repair. Shielding gas is argon or argon/CO2. The welding wire features a tensile strength of 79, 000 PSI tensile strength.
- Stainless steel
- Welding wire consists of 20% chromium and 10% nickel
- 79, 000 PSI tensile strength
- Requires shielding gas
Forney 1/8 In. x 18 In. General Purpose Brazing Rod (10-Pack)
Forney 3/32 In. x 18 In. Fluxed Brazing Rod (10-Pack)
Forney 312-16 Stainless Alloy Electrode, 3/32 In., 1 Lb.
Forney E4043 Aluminum Electrode, 1/8 In., 1/2 Lb.
Forney DC Aluminum Electrode
- DC aluminum "aluminarc" specialty welding electrodes are the highest strength alloy for arc and torch welding of low alloy aluminum.
- Excellent for cast, wrought, and extruded aluminum in all positions.
- Can also be used as a torch brazing alloy.
- Typical applications include truck beds, loading ramps and docks, banisters, stairs, diamond plates, irrigation piping, engine blocks, transmission housings, and railroad frogs.
- 1/8 In., 1/2 Lb.
Forney E6013 Mild Steel General Purpose Electrode, 1/8 In., 1 Lb.
Forney Mild Steel General Purpose Electrode
Mild steel "Superweld" is an all-position, general purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed.
Excellent for poorly fitted joints. Small sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel where ease of operation and good appearance is required. Great for light gauge metal, sheet metal, duct-work, etc.
Forney E6013 Mild Steel General Purpose Electrode, 3/32 In., 1 Lb.
Forney Mild Steel General Purpose Electrode
Mild steel "Superweld" is an all-position, general purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints.
Small sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel where ease of operation and good appearance is required. Great for light gauge metal, sheet metal, duct-work, etc.
Forney E7014 Mild Steel High Deposition Electrode, 1/8 In., 1 Lb.
Forney Mild Steel High Deposition Electrode
- Mild steel, "Super Contact", iron powder-type electrode with medium to shallow penetration.
- Smooth arc characteristics, good arc stability, and low spatter.
- Excellent for sheet metal and ornamental ironwork on poorly fitted joints.
- Use anywhere ease of operation and good appearance is required.
- 1/8 In., 1 Lb.
Forney E71T-GS 0.030 In. Flux Core Mild Steel Mig Wire, 2 Lb.
Forney Flux Core Mild Steel Mig Wire
- E71T-GS flux core MIG (GMAW) welding wire for mild steel is self-shielded mild steel all position flux cored MIG welding wire.
- Best suited to single pass applications with high travel speed.
- Moderate to low spatter.
- Although no gas is required, an Argon/CO2 mix will reduce spatter.
- Excellent on thin gauge mild steel.
- 0.030 In. 2Lb.
Forney E71T-GS 0.035 In. Flux Core Mild Steel Mig Wire, 2 Lb.
Forney Flux Core Mild Steel Mig Wire
- E71T-GS flux core MIG (GMAW) welding wire for mild steel is self-shielded mild steel all position flux cored MIG welding wire.
- Best suited to single pass applications with high travel speed.
- Moderate to low spatter.
- Although no gas is required, an Argon/CO2 mix will reduce spatter.
- Excellent on thin gauge mild steel.
- 0.035 In. 2 Lb.
Forney E71T-GS 0.035 Inch 10 Lb Flux Core Mild Steel Mig Wire
E71T-GS flux core MIG (GMAW) welding wire for mild steel is self-shielded mild steel all position flux cored MIG welding wire. Best suited to single pass applications with high travel speed. Moderate to low spatter. Although no gas is required, an Argon/CO2 mix will reduce spatter. Excellent on thin gauge mild steel.
- Excellent on thin gauge mild steel
- Best suited to single pass applications
- Moderate to low spatter
Forney ER70S-6 Mild Steel Mig Wire, 0.024 In., 2 Lb.
Forney Mild Steel Mig Wire
- ER 70S-6 mild steel MIG (GMAW) welding wire is a high-strength mild steel MIG wire.
- Ideal for auto body repair and fabrication on most ferrous metals.
- Contains a high level of manganese and silicon for a superior weld, even on rusty, dirty steel.
- Produces a smooth bead that requires less grinding.
- Not recommended for aluminum engines.
- 0.024 In., 2 Lb.
Forney ER70S-6 Mild Steel Mig Wire, 0.035 In., 2 Lb.
Forney Mild Steel Mig Wire
- ER 70S-6 mild steel MIG (GMAW) welding wire is a high-strength mild steel MIG wire.
- Ideal for auto body repair and fabrication on most ferrous metals.
- Contains a high level of manganese and silicon for a superior weld, even on rusty, dirty steel.
- Produces a smooth bead that requires less grinding.
- Not recommended for aluminum engines.
- 0.035 In., 2 Lb.
Hilco Basic 7018 Welding Rod (350mm) – 4 Packs Per Cartoon
Basic 7018 arc welding rod is commonly used for general-purpose welding of carbon steel. It is a mild steel rod that is coated with a low-hydrogen, iron-based flux compound that vaporizes to shield the molten weld bead from contamination by air and moisture. Available in various guages.
Brand: Hilco
Size: 350 mm
23KG per cartoon.
4 packs per cartoon.
Guage: 10G
Hilco Red Extra 6013 Welding Rod (350mm)
Red extra 6013 welding rod is a high titanic coated electrode. This electrode was primarily designed to provide good wetting and shallow penetration for thin sheet metal applications but with sufficient penetration for welding medium gauge steel. Available in various guages.
Brand: Hilco
Size: 350mm
Guage: 10G
Hilco Red Extra 6013 Welding Rod (350mm) – 4 Packs Per Cartoon
Red extra 6013 welding rod is a high titanic coated electrode. This electrode was primarily designed to provide good wetting and shallow penetration for thin sheet metal applications but with sufficient penetration for welding medium gauge steel. Available in various guages.
Brand: Hilco
Size: 350mm
20KG per cartoon.
4 pack per cartoon.
Guage: 8G