Plastic Pipe Fittings
Anderson Metals 1/4 In. x 1/4 In. Push-In Plastic Coupling
Keeney Insta-Plumb 1-1/2 Inch White Plastic 90 Degree Coupling Elbow
Insta-Plumb 90 Degree coupling elbow 1-1/2 In. for kitchen. Insta-Plumb features a push-fit application design for quick and simple installations. Fast and easy connection with no solvent, glues, nuts or washers. Stainless steel grip ring holds the connection tight and an O-ring provides a leak-free seal. Great for hard to reach or confined areas under a sink. Connections can be easily removed and/or adjusted using the release tool. Fittings can be reused.
- Connections can be easily removed and/or adjusted
- Push-fit application design
- 90 Degree elbow
- 1-1/2 Inch
Keeney Insta-Plumb 1-1/2 Inch White Plastic Straight Coupling
Insta-Plumb straight coupling 1-1/2 Inch for kitchen. Insta-Plumb features a push-fit application design for quick and simple installations. Fast and easy connection with no solvent, glues, nuts or washers. Stainless steel grip ring holds the connection tight and an O-ring provides a leak-free seal. Great for hard to reach or confined areas under a sink. Connections can be easily removed and/or adjusted using the release tool. Fittings can be reused.
- Connections can be easily removed and/or adjusted
- Push-fit application design
- Straight coupling
- 1-1/2 Inch
SharkBite EvoPex 1/2 Inch Push-To-Connect Plastic Cap
SharkBite EvoPex stops are the easiest way to cap off PEX tubing lines. This push-to-connect fitting is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Designed to make PEX-to-PEX connections in potable water and radiant heating applications
- Approved for underground and behind-the-wall applications with no access panels
- Green visual indicator shows PEX pipe is inserted to the proper depth
SharkBite EvoPex 1/2 x 1/2 Inch Bend Push-To-Connect Plastic Elbow
This push-to-connect elbow fitting is designed to make leak-free PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Elbow fitting is designed to make leak-free PEX-to-PEX connections
- No soldering, clamps, unions or glue are required
- Push-to-connect elbow fitting
- 1/2 x 1/2 Inch
SharkBite EvoPex 1/2 x 1/2 Inch Bend Push-To-Connect Plastic Elbow 6Pk
This push-to-connect elbow fitting is designed to make leak-free PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Elbow fitting is designed to make leak-free PEX-to-PEX connections
- No soldering, clamps, unions or glue are required
- Push-to-connect elbow fitting
- 1/2 x 1/2 Inch
- 6 Pack
SharkBite EvoPex 1/2 x 1/2 Inch FPT Push-to-Connect Plastic Connector
This push-to-connect fitting with a brass adapter on the opposite end is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Designed for PEX only. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Designed to make PEX-to-PEX connections in potable water
- No soldering, clamps, unions or glue are required
- Push-to-connect fitting
- 1/2 x 1/2 FPT
SharkBite EvoPex 1/2 x 1/2 Inch MPT Push-to-Connect Plastic Connector
This push-to-connect fitting with a brass adapter on the opposite end is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Designed for PEX only. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Designed to make PEX-to-PEX connections in potable water
- No soldering, clamps, unions or glue are required
- Push-to-connect fitting
- 1/2 x 1/2 Inch MPT
SharkBite EvoPex 1/2 x 1/2 Inch Push-To-Connect Drop-Ear Plastic Elbow
Drop ear elbow is used to transition from PEX to threaded pipe, such as shower arms or tub spouts. This push-to-connect fitting is designed to make leak-free PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Designed to make leak-free PEX-to-PEX connections in potable water and radiant heating applications
- Used to transition from PEX to threaded pipe
- Push-to-connect fitting is designed
- 1/2 x 1/2 Inch
SharkBite EvoPex 1/2 x 1/2 Inch Push-To-Connect Plastic Ball Valve
This push-to-connect valve is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Designed to make PEX-to-PEX connections in potable water and radiant heating applications
- Approved for underground and behind-the-wall applications with no access panels
- Green visual indicator shows PEX pipe is inserted to the proper depth
SharkBite EvoPex 1/2 x 1/2 Inch Push-to-Connect Plastic Coupling
This push-to-connect fitting is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Designed to make PEX-to-PEX connections in potable water
- No soldering, clamps, unions or glue are required
- Push-to-connect fitting is designed
- 1/2 x 1/2 Inch
SharkBite EvoPex 1/2 x 1/2 x 1/2 Inch Push-To-Connect Plastic Tee
This push-to-connect tee fitting is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Rotatable after assembly, which makes for easy installation even in cramped working conditions. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Compatible with PEX pipe only
- No crimp/clamp/PEX rings or special tools required
- Green visual indicator shows PEX pipe is inserted to the proper depth
- Approved for underground and behind-the-wall applications with no access panels
SharkBite EvoPex 3/4 Inch Push-To-Connect Plastic Cap
SharkBite EvoPex stops are the easiest way to cap off PEX tubing lines. This push-to-connect fitting is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Designed to make PEX-to-PEX connections in potable water and radiant heating applications
- Approved for underground and behind-the-wall applications with no access panels
- Green visual indicator shows PEX pipe is inserted to the proper depth
SharkBite EvoPex 3/4 x 1/2 Inch Reducing Push-To-Connect Plastic Coupling
This push-to-connect fitting is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Designed to make PEX-to-PEX connections in potable water
- No soldering, clamps, unions or glue are required
- Push-to-connect fitting
- 3/4 x 1/2 Inch
SharkBite EvoPex 3/4 x 1/2 x 1/2 Inch Reducing Push-To-Connect Plastic Tee
This push-to-connect tee fitting is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Rotatable after assembly, which makes for easy installation even in cramped working conditions. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Approved for underground and behind-the-wall applications with no access panels
- Green visual indicator shows PEX pipe is inserted to the proper depth
- 25-year system warranty when used with SharkBite PEX pipe
- No crimp/clamp/PEX rings or special tools required
- Compatible with PEX pipe only
SharkBite EvoPex 3/4 x 3/4 Inch FPT Push-to-Connect Plastic Connector
This push-to-connect fitting with a brass adapter on the opposite end is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Designed for PEX only. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Designed to make PEX-to-PEX connections in potable water
- No soldering, clamps, unions or glue are required
- Push-to-connect fitting
- 3/4 x 3/4 Inch FPT
SharkBite EvoPex 3/4 x 3/4 Inch MPT Push-to-Connect Plastic Connector
This push-to-connect fitting with a brass adapter on the opposite end is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Designed for PEX only. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Designed to make PEX-to-PEX connections in potable water
- No soldering, clamps, unions or glue are required
- Push-to-connect fitting
- 3/4 x 3/4 Inch MPT
SharkBite EvoPex 3/4 x 3/4 Inch Push-To-Connect Plastic Ball Valve
This push-to-connect valve is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Designed to make PEX-to-PEX connections in potable water and radiant heating applications
- Approved for underground and behind-the-wall applications with no access panels
- Green visual indicator shows PEX pipe is inserted to the proper depth
SharkBite EvoPex 3/4 x 3/4 Inch Push-to-Connect Plastic Coupling
This push-to-connect fitting is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Designed to make PEX-to-PEX connections in potable water applications
- No soldering, clamps, unions or glue are required
- Push-to-connect fitting
- 3/4 x 3/4 Inch
SharkBite EvoPex 3/4 x 3/4 Inch Push-To-Connect Plastic Elbow 6Pk
This push-to-connect elbow fitting is designed to make leak-free PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Elbow fitting is designed to make leak-free PEX-to-PEX connections
- No soldering, clamps, unions or glue are required
- Push-to-connect elbow fitting
- 3/4 x 3/4 Inch
SharkBite EvoPex 3/4 x 3/4 Inch Push-To-Connect Plastic Elbow 6Pk
This push-to-connect elbow fitting is designed to make leak-free PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Elbow fitting is designed to make leak-free PEX-to-PEX connections
- No soldering, clamps, unions or glue are required
- Push-to-connect elbow fitting
- 3/4 x 3/4 Inch
- 6 Pack
SharkBite EvoPex 3/4 x 3/4 x 1/2 Inch Reducing Push-To-Connect Plastic Tee
This push-to-connect tee fitting is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Rotatable after assembly, which makes for easy installation even in cramped working conditions. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Green visual indicator shows PEX pipe is inserted to the proper depth
- 25-year system warranty when used with SharkBite PEX pipe
- Approved for underground and behind-the-wall applications
- No crimp/clamp/PEX rings or special tools required
- Compatible with PEX pipe only
SharkBite EvoPex 3/4 x 3/4 x 3/4 Inch Push-To-Connect Plastic Tee
This push-to-connect tee fitting is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Rotatable after assembly, which makes for easy installation even in cramped working conditions. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Compatible with PEX pipe only
- No crimp/clamp/PEX rings or special tools required
- Green visual indicator shows PEX pipe is inserted to the proper depth
- Approved for underground and behind-the-wall applications with no access panels