BLUE MONSTER Blue Thread Seal Tape

$49.01 TTD
Blue Monster PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that's 5 times more tape than conventional rolls of low-density thin tapes. Fewer wraps are necessary to affect a leak-proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze.
  • 3/4 In. x 520 In.
 

Do it 1 Oz. Tube White TFE Paste

$20.00 TTD
Pure white pipe thread sealant. Nonhardening. Withstands up to 3000 P.S.I. and temperatures from -50 deg. F. to +500 deg. F.

Do it 1-1/4 Oz. Yellow Stick Pipe Compound

$13.01 TTD
1-1/4 oz. Pipe thread compound in stick form. Lubricates, seals, and prevents rust and corrosion. Use on metal or plastic pipe carrying air, water, steam, oil, gasoline, freon, ammonia, propane and butane. Heavy PVC tube outside compound stick allows compound to be pushed through as needed.

Do it 14 Oz. Plumber’s Putty

$25.00 TTD
Long-lasting and flexible. Will not support bacteria or harden, shrink, crack, or crumble even if can is left open. For setting bowls, rims, strainers, faucets, etc. Do not use on marble, synthetic marble, other porous surfaces or on plastic lavatories and fixtures.

Do it 2 Fl. Oz. Gray Non-Drip Pipe Compound

$11.00 TTD
2 oz. Thixotropic nondrip paste for pipe joint threads on lines carrying water, steam, or air. Prevents corrosion to threads, never hardens, joints separate easily.

Do it 4 Oz. White TFE Paste

$58.01 TTD
Pure white pipe thread sealant. Nonhardening. Withstands up to 3000 P.S.I. and temperatures from -50 deg. F. to +500 deg. F.

Do it 7 Oz. Plumber’s Putty

$22.01 TTD
Do it Plumber's Putty Long-lasting and flexible. Will not support bacteria or harden, shrink, crack, or crumble even if can is left open. For setting bowls, rims, strainers, faucets, etc. Do not use on marble, synthetic marble, other porous surfaces or on plastic lavatories and fixtures. Meets Federal Specification TT-P-1536A.

Do it 8 Oz. White TFE Paste

$105.00 TTD
Pure white pipe thread sealant. Nonhardening. Withstands up to 3000 P.S.I. and temperatures from -50 deg. F. to +500 deg. F.

Do it Best 1/2 Oz. Silicone Plumber Grease

$36.00 TTD
Do it Best Silicone Plumber Grease Silicone grease is a 90% pure silicone product which contains no petroleum additives and offers greater heat resistance, up to 450 deg. F., than lithium based greases. Nonstaining. Apply to rubber and synthetic O-rings. 1/2 fl. oz. cup in blister card.

Do it Best 16 Oz. Medium Bodied Clear Multi Purpose Solvent Cement

$146.00 TTD
MP-6 medium bodied, medium set, multipurpose clear cement for use on PVC, CPVC, and ABS pipe and fittings, Schedule 40 and 80, Types I and II, up to 6".

Do it Best 16 Oz. Purple Primer for PVC/CPVC

$118.00 TTD
Do it Best Purple Pipe and Fitting Primer
  • An all-purpose purple primer designed to remove gloss, soften, and penetrate bonding surfaces of PVC and CPVC pipe and fittings.
  • Highly recommended for use on high-gloss, hard finish bell end pipe or fittings.
  • 16oz.

Do it Best 16oz All-Purpose Pipe Clear PVC Cleaner

$75.00 TTD
All-purpose, clear pipe cleaner can be used on ABS, CPVC and PVC pipe and fittings. Apply at temperatures 40 degrees Fahrenheit to 100 degrees Fahrenheit. Flows freely and evaporates quickly. Removes surface dirt, grease and grime.
  • Removes surface dirt, grease and grime
  • Used on ABS, CPVC and PVC pipe and fittings
  • Flows freely and evaporates quickly

Do it Best 4 Oz. All-Purpose Pipe Clear PVC Cleaner

$41.01 TTD
All-purpose pipe cleaner can be used on ABS, CPVC, and PVC pipe and fittings. Apply at temperatures 40 deg. F. to 100 deg. F.
  • Flows freely and evaporates quickly.

Do it Best 4 Oz. Purple Pipe and Fitting Primer

$47.00 TTD
All-purpose purple primer designed to remove gloss, soften, and penetrate bonding surfaces of PVC and CPVC pipe and fittings. Highly recommended for use on high-gloss, hard finish bell end pipe or fittings.
  • For PVC/CPVC

Do it Best Regular Bodied Clear PVC Cement, 16oz

$105.00 TTD
P-4 Regular Bodied PVC Cement is designed for quick bonding and easy flow into joints making it perfect for schedules and classes of PVC pipe up to 4" (Schedule 40) and up to 2" for Schedule 80. It also has a low volatile organic compound content and rated for use between 40 °F and 110 °F (4 °C–43 °C) to meet environmental requirements.
 
  • Meets NSF and ASTM D2564 standards
  • Clear, translucent liquid applied via built‑in dauber
  • Suitable for potable water, pressure, drain‑waste‑vent, and conduit applications

Do it Best Regular Bodied Clear PVC Cement, 32oz

$176.00 TTD
P-4 Regular Bodied PVC Cement is designed for quick bonding and easy flow into joints making it perfect for schedules and classes of PVC pipe up to 4" (Schedule 40) and up to 2" for Schedule 80. It also has a low volatile organic compound content and rated for use between 40 °F and 110 °F (4 °C–43 °C) to meet environmental requirements.
  • Meets NSF and ASTM D2564 standards
  • Clear, translucent liquid applied via built‑in dauber
  • Suitable for potable water, pressure, drain‑waste‑vent, and conduit applications

Do it Best Regular Bodied Clear PVC Cement, 8oz

$63.00 TTD
P-4 Regular Bodied PVC Cement is designed for quick bonding and easy flow into joints making it perfect for schedules and classes of PVC pipe up to 4" (Schedule 40) and up to 2" for Schedule 80. It also has a low volatile organic compound content and rated for use between 40 °F and 110 °F (4 °C–43 °C) to meet environmental requirements.
  • Meets NSF and ASTM D2564 standards
  • Clear, translucent liquid applied via built‑in dauber
  • Suitable for potable water, pressure, drain‑waste‑vent, and conduit applications

Do it Best Wet Set-Medium Bodied PVC Cement, 16oz

$128.00 TTD
Do it Best Wet-Set Medium Bodied PVC Cement is a fast-setting PVC cement that's engineered for reliable performance in wet conditions. Its blue formula ensures easy application and visual confirmation, making it ideal for various plumbing and irrigation projects.
  • Meets environmental regulations for volatile organic compounds
  • Provides a balance between ease of application and strong adhesion
  • Excellent choice for professionals seeking a dependable solution for wet condition applications
  • Compliant with ASTM D2564 and suitable for potable water, pressure, conduit, and DWV systems.
  • Suitable for all schedules and classes of PVC pipe and fittings up to 6 inches in diameter with interference fit

Do it Best White Thread Seal Tape

$17.01 TTD
PTFE thread seal is manufactured from virgin PTFE. Suitable for use on oxygen and potable water systems. Plastic spool and shell.
  • 3/4 In. x 260 In.

Do it Best White Thread Seal Tape

$15.75 TTD
PTFE thread seal is manufactured from virgin PTFE. Suitable for use on oxygen and potable water systems. Plastic spool and shell.
  • 1/2 In. x 520 In.

Do it Plumber’s Putty Roll

$44.01 TTD
The quick and easy way to use plumbers putty when installing plumbing fixtures. For setting plumbing fixtures, tubs, and sinks. Use as a seal for fixtures, tubs, sinks, and more.
  • Contains 1 paper backed roll plumbers putty 54" L. x 3/4" W.

Do it White Thread Seal Tape

$5.00 TTD
PTFE (polytetrafluoroethylene) thread seal is manufactured from virgin PTFE. Suitable for use on oxygen and potable water systems.
  • 1/2 In. x 260 In.

Dunlop Hot & Cold PVC Cement Solvent, 30ml

$13.50 TTD
Dunlop Hot & Cold PVC Cement is a high-performance solvent cement specially formulated to bond rigid PVC and CPVC pipes in both hot and cold-water systems including potable water and HVAC systems.
  • This compact 30 ml size is perfect for tight spaces or quick repairs
  • Dries rapidly, handle after 15 minutes, pressure-ready in an hour and full cure within 24 hours
  • Creates a permanent, watertight seal for PVC and CPVC pipe joints resistant to heat and cold cycling

Dunlop Hot & Cold PVC Cement Solvent, 60ml

$16.00 TTD
Dunlop Hot & Cold PVC Cement is a high-performance solvent cement specially formulated to bond rigid PVC and CPVC pipes in both hot and cold-water systems including potable water and HVAC systems.
  • Perfect for tight spaces or quick repairs.
  • Dries rapidly, handle after 15 minutes, pressure-ready in an hour and full cure within 24 hours
  • Creates a permanent, watertight seal for PVC and CPVC pipe joints resistant to heat and cold cycling