Pipe Fittings
SharkBite 3/4″ x 1/2″ MNPT Bullnose Push-to-Connect Male Adapter
SharkBite Push-to-Connect Brass Male Adapter
- Male iron pipe end.
- Brass push fitting - no solder, glue, unions, or tools required.
- The fitting can be used with copper, PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride) and is rated at 200 F (degree Farhenheit), 200 psi (pounds per square inch).
- It is made of 1-piece DZR brass.
- Fittings can be buried and placed behind drywall.
- Fittings are removable (with a disconnect clip) and reusable.
- 3/4 In. x 1/2 In. MNPT.
SharkBite 3/4″ x 3/4″ FNPT Push-to-Connect Female Adapter
SharkBite Push-to-Connect Brass Female Adapter
- Female iron pipe end.
- Brass push fitting - no solder, glue, unions, or tools required.
- UPC, IAPMO, and NSF-61 certified and approved.
- Fittings are removable (with a disconnect clip) and reusable.
- The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 P.S.I.
- It is made of 1-piece DZR brass.
- Fittings can be buried and placed behind drywall.
- The product is individually bagged.
- 3/4 In. x 3/4 In. FNPT.
SharkBite 3/4″ x 3/4″ MNPT Push-to-Connect Male Adapter
SharkBite Push-to-Connect Brass Male Adapter
- Male iron pipe end. Brass push fitting - no solder, glue, unions, or tools required.
- The fitting can be used with copper, PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride) and is rated at 200 F (degree Farhenheit), 200 psi (pounds per square inch).
- It is made of 1-piece DZR brass.
- Fittings can be buried and placed behind drywall.
- Fittings are removable (with a disconnect clip) and reusable.
- The product is individually bagged.
- 3/4 In. x 3/4 In. MNPT.
SharkBite 3/4″ x 3/4″ Push-to-Connect Brass Elbow (1/4 Bend)
SharkBite Push-to-Connect 90 Deg. Brass Elbow (Push x Push)
- Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved.
- The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI.
- It is made of 1-piece DZR brass.
- Fittings can be buried and placed behind drywall.
- Fittings are removable and reusable.
- The product is individually bagged.
- 3/4 In. x 3/4 In. 90 Deg.
SharkBite 3/4″ x 3/4″ Push-to-Connect Conversion Coupling
SharkBite Push-to-Connect Polybutylene Conversion Coupling
- The fastest, easiest way to transition from polybutylene pipe over to PEX (Coss-linked Polyethylene), copper, CPVC (Chlorinated Polyvinyl Chloride), and PE-RT - wet or dry.
- Approved to be used underground (wrap required in burial installation) and behind walls without access panels.
- Fittings are certified to 200 psi and 200 F (93 C).
- The fitting has color-coordinated collars on each end to identify which side goes with which pipe.
- 3/4 In. x 3/4 In.
SharkBite 3/4″ x 3/4″ x 3/4″ Brass Push-to-Connect Tee
SharkBite Brass Push-to-Connect Tee
- Brass push fitting - no soldering, clamps, unions or glue required. UPC, IAPMO, and NSF-61 certified and approved.
- The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI.
- It is made of 1-piece DZR brass.
- Fittings can be buried and placed behind drywall.
- Fittings are removable (with a disconnect clip) and reusable.
- The product is individually bagged.
- 3/4 In. x 3/4 In. x 3/4 In.
SharkBite EvoPex 1/2 Inch Push-To-Connect Plastic Cap
SharkBite EvoPex stops are the easiest way to cap off PEX tubing lines. This push-to-connect fitting is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Designed to make PEX-to-PEX connections in potable water and radiant heating applications
- Approved for underground and behind-the-wall applications with no access panels
- Green visual indicator shows PEX pipe is inserted to the proper depth
SharkBite EvoPex 1/2 x 1/2 Inch Bend Push-To-Connect Plastic Elbow
This push-to-connect elbow fitting is designed to make leak-free PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Elbow fitting is designed to make leak-free PEX-to-PEX connections
- No soldering, clamps, unions or glue are required
- Push-to-connect elbow fitting
- 1/2 x 1/2 Inch
SharkBite EvoPex 1/2 x 1/2 Inch Bend Push-To-Connect Plastic Elbow 6Pk
This push-to-connect elbow fitting is designed to make leak-free PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Elbow fitting is designed to make leak-free PEX-to-PEX connections
- No soldering, clamps, unions or glue are required
- Push-to-connect elbow fitting
- 1/2 x 1/2 Inch
- 6 Pack
SharkBite EvoPex 1/2 x 1/2 Inch MPT Push-to-Connect Plastic Connector
This push-to-connect fitting with a brass adapter on the opposite end is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Designed for PEX only. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Designed to make PEX-to-PEX connections in potable water
- No soldering, clamps, unions or glue are required
- Push-to-connect fitting
- 1/2 x 1/2 Inch MPT
SharkBite EvoPex 1/2 x 1/2 Inch Push-To-Connect Drop-Ear Plastic Elbow
Drop ear elbow is used to transition from PEX to threaded pipe, such as shower arms or tub spouts. This push-to-connect fitting is designed to make leak-free PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Designed to make leak-free PEX-to-PEX connections in potable water and radiant heating applications
- Used to transition from PEX to threaded pipe
- Push-to-connect fitting is designed
- 1/2 x 1/2 Inch
SharkBite EvoPex 1/2 x 1/2 Inch Push-To-Connect Plastic Ball Valve
This push-to-connect valve is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Designed to make PEX-to-PEX connections in potable water and radiant heating applications
- Approved for underground and behind-the-wall applications with no access panels
- Green visual indicator shows PEX pipe is inserted to the proper depth
SharkBite EvoPex 1/2 x 1/2 Inch Push-to-Connect Plastic Coupling
This push-to-connect fitting is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Designed to make PEX-to-PEX connections in potable water
- No soldering, clamps, unions or glue are required
- Push-to-connect fitting is designed
- 1/2 x 1/2 Inch
SharkBite EvoPex 1/2 x 1/2 x 1/2 Inch Push-To-Connect Plastic Tee
This push-to-connect tee fitting is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Rotatable after assembly, which makes for easy installation even in cramped working conditions. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Compatible with PEX pipe only
- No crimp/clamp/PEX rings or special tools required
- Green visual indicator shows PEX pipe is inserted to the proper depth
- Approved for underground and behind-the-wall applications with no access panels
SharkBite EvoPex 1/2 x 3/8 Inch Push-To-Connect Plastic Straight Valve
This push-to-connect valve is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Designed to make PEX-to-PEX connections in potable water and radiant heating applications
- Green visual indicator shows PEX pipe is inserted to the proper depth
- No soldering, clamps, unions or glue are required
SharkBite EvoPex 3/4 Inch Push-To-Connect Plastic Cap
SharkBite EvoPex stops are the easiest way to cap off PEX tubing lines. This push-to-connect fitting is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Designed to make PEX-to-PEX connections in potable water and radiant heating applications
- Approved for underground and behind-the-wall applications with no access panels
- Green visual indicator shows PEX pipe is inserted to the proper depth
SharkBite EvoPex 3/4 x 1/2 Inch Reducing Push-To-Connect Plastic Coupling
This push-to-connect fitting is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Designed to make PEX-to-PEX connections in potable water
- No soldering, clamps, unions or glue are required
- Push-to-connect fitting
- 3/4 x 1/2 Inch
SharkBite EvoPex 3/4 x 1/2 x 1/2 Inch Reducing Push-To-Connect Plastic Tee
This push-to-connect tee fitting is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Rotatable after assembly, which makes for easy installation even in cramped working conditions. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Approved for underground and behind-the-wall applications with no access panels
- Green visual indicator shows PEX pipe is inserted to the proper depth
- 25-year system warranty when used with SharkBite PEX pipe
- No crimp/clamp/PEX rings or special tools required
- Compatible with PEX pipe only
SharkBite EvoPex 3/4 x 3/4 Inch FPT Push-to-Connect Plastic Connector
This push-to-connect fitting with a brass adapter on the opposite end is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Designed for PEX only. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Designed to make PEX-to-PEX connections in potable water
- No soldering, clamps, unions or glue are required
- Push-to-connect fitting
- 3/4 x 3/4 Inch FPT
SharkBite EvoPex 3/4 x 3/4 Inch MPT Push-to-Connect Plastic Connector
This push-to-connect fitting with a brass adapter on the opposite end is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Designed for PEX only. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Designed to make PEX-to-PEX connections in potable water
- No soldering, clamps, unions or glue are required
- Push-to-connect fitting
- 3/4 x 3/4 Inch MPT
SharkBite EvoPex 3/4 x 3/4 Inch Push-To-Connect Plastic Ball Valve
This push-to-connect valve is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Designed to make PEX-to-PEX connections in potable water and radiant heating applications
- Approved for underground and behind-the-wall applications with no access panels
- Green visual indicator shows PEX pipe is inserted to the proper depth
SharkBite EvoPex 3/4 x 3/4 Inch Push-to-Connect Plastic Coupling
This push-to-connect fitting is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Designed to make PEX-to-PEX connections in potable water applications
- No soldering, clamps, unions or glue are required
- Push-to-connect fitting
- 3/4 x 3/4 Inch
SharkBite EvoPex 3/4 x 3/4 Inch Push-To-Connect Plastic Elbow 6Pk
This push-to-connect elbow fitting is designed to make leak-free PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Elbow fitting is designed to make leak-free PEX-to-PEX connections
- No soldering, clamps, unions or glue are required
- Push-to-connect elbow fitting
- 3/4 x 3/4 Inch
SharkBite EvoPex 3/4 x 3/4 Inch Push-To-Connect Plastic Elbow 6Pk
This push-to-connect elbow fitting is designed to make leak-free PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue are required. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. A green indicator ring will display in the slots around the fitting to visually display that the permanent inner-diameter connection is secure. Made of engineered polymer. Fittings are rated up to 80 psi @ 200 F, 100 psi @ 180 F, and 160 psi @ 73.4 F.
- Elbow fitting is designed to make leak-free PEX-to-PEX connections
- No soldering, clamps, unions or glue are required
- Push-to-connect elbow fitting
- 3/4 x 3/4 Inch
- 6 Pack