BLUE MONSTER Blue Thread Seal Tape

$49.01 TTD
Blue Monster PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that's 5 times more tape than conventional rolls of low-density thin tapes. Fewer wraps are necessary to affect a leak-proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze.
  • 3/4 In. x 520 In.
 

Do it 1 Oz. Tube White TFE Paste

$20.00 TTD
Pure white pipe thread sealant. Nonhardening. Withstands up to 3000 P.S.I. and temperatures from -50 deg. F. to +500 deg. F.

Do it 1 Oz. Waterproof Plumber Grease

$23.00 TTD
Do it Waterproof Plumber Grease
  • Do it Faucet and Valve Grease is a waterproof grease that resists high temperatures.
  • Apply to metal parts of faucets and valves.
  • Use hot water or steam to 350 F.
  • 1 oz. tube.

Do it 1-1/4 Oz. Yellow Stick Pipe Compound

$13.01 TTD
1-1/4 oz. Pipe thread compound in stick form. Lubricates, seals, and prevents rust and corrosion. Use on metal or plastic pipe carrying air, water, steam, oil, gasoline, freon, ammonia, propane and butane. Heavy PVC tube outside compound stick allows compound to be pushed through as needed.

Do it 14 Oz. Plumber’s Putty

$25.00 TTD
Long-lasting and flexible. Will not support bacteria or harden, shrink, crack, or crumble even if can is left open. For setting bowls, rims, strainers, faucets, etc. Do not use on marble, synthetic marble, other porous surfaces or on plastic lavatories and fixtures.

Do it 2 Fl. Oz. Gray Non-Drip Pipe Compound

$11.00 TTD
2 oz. Thixotropic nondrip paste for pipe joint threads on lines carrying water, steam, or air. Prevents corrosion to threads, never hardens, joints separate easily.

Do it 4 Oz. White TFE Paste

$58.01 TTD
Pure white pipe thread sealant. Nonhardening. Withstands up to 3000 P.S.I. and temperatures from -50 deg. F. to +500 deg. F.

Do it 7 Oz. Plumber’s Putty

$22.01 TTD
Do it Plumber's Putty Long-lasting and flexible. Will not support bacteria or harden, shrink, crack, or crumble even if can is left open. For setting bowls, rims, strainers, faucets, etc. Do not use on marble, synthetic marble, other porous surfaces or on plastic lavatories and fixtures. Meets Federal Specification TT-P-1536A.

Do it 8 Oz. White TFE Paste

$105.00 TTD
Pure white pipe thread sealant. Nonhardening. Withstands up to 3000 P.S.I. and temperatures from -50 deg. F. to +500 deg. F.

Do it Best 1/2 Oz. Silicone Plumber Grease

$36.00 TTD
Do it Best Silicone Plumber Grease Silicone grease is a 90% pure silicone product which contains no petroleum additives and offers greater heat resistance, up to 450 deg. F., than lithium based greases. Nonstaining. Apply to rubber and synthetic O-rings. 1/2 fl. oz. cup in blister card.

Do it Best 1/2 x 260 Inch Yellow Thread Seal Gas Line Tape

$45.00 TTD
Ideally suited for all threaded connections involving gas line installations for natural gas, propane, butane, and/or water, oil, and chemicals. Withstands up to 10,000 P.S.I. and temperatures of -450 degree F. to +550 degree F.
  • Suited for all threaded connections involving gas line installations
  • For natural gas, propane, butane, and/or water, oil, and chemicals
  • Yellow tape

Do it Best 16 Oz. Medium Bodied Clear Multi Purpose Solvent Cement

$146.00 TTD
MP-6 medium bodied, medium set, multipurpose clear cement for use on PVC, CPVC, and ABS pipe and fittings, Schedule 40 and 80, Types I and II, up to 6".

Do it Best 16 Oz. Purple Primer for PVC/CPVC

$118.00 TTD
Do it Best Purple Pipe and Fitting Primer
  • An all-purpose purple primer designed to remove gloss, soften, and penetrate bonding surfaces of PVC and CPVC pipe and fittings.
  • Highly recommended for use on high-gloss, hard finish bell end pipe or fittings.
  • 16oz.

Do it Best 16oz All-Purpose Pipe Clear PVC Cleaner

$75.00 TTD
All-purpose, clear pipe cleaner can be used on ABS, CPVC and PVC pipe and fittings. Apply at temperatures 40 degrees Fahrenheit to 100 degrees Fahrenheit. Flows freely and evaporates quickly. Removes surface dirt, grease and grime.
  • Removes surface dirt, grease and grime
  • Used on ABS, CPVC and PVC pipe and fittings
  • Flows freely and evaporates quickly

Do it Best 4 Oz. All-Purpose Pipe Clear PVC Cleaner

$41.01 TTD
All-purpose pipe cleaner can be used on ABS, CPVC, and PVC pipe and fittings. Apply at temperatures 40 deg. F. to 100 deg. F.
  • Flows freely and evaporates quickly.

Do it Best 4 Oz. Medium Bodied Blue PVC Cement

$52.00 TTD
Do it Best Wet Set PVC Solvent Cement
  • Wet set medium-bodied, fast setting blue PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed.
  • Recommended for pressure pipe, Schedule 40 and 80, Types I and II, up to 6".
  • For irrigation, natural gas pipe, and conduit pipe.
  • NSF certified for use in potable water, sewer and drain waste, and vent systems.
  • 4 Oz.

Do it Best 4 Oz. Medium Bodied Clear Multi Purpose Solvent Cement

$50.00 TTD
MP-6 medium bodied, medium set, multipurpose clear cement for use on PVC, CPVC, and ABS pipe and fittings, Schedule 40 and 80, Types I and II, up to 6".

Do it Best 4 Oz. Purple Pipe and Fitting Primer

$47.00 TTD
All-purpose purple primer designed to remove gloss, soften, and penetrate bonding surfaces of PVC and CPVC pipe and fittings. Highly recommended for use on high-gloss, hard finish bell end pipe or fittings.
  • For PVC/CPVC

Do it Best 8 Oz. Medium Bodied Clear Multi Purpose Solvent Cement

$78.00 TTD
MP-6 medium bodied, medium set, multipurpose clear cement for use on PVC, CPVC, and ABS pipe and fittings, Schedule 40 and 80, Types I and II, up to 6".

Do it Best 8 Oz. Purple Primer for PVC/CPVC

$75.00 TTD
Do it Best Purple Pipe and Fitting Primer
  • An all-purpose purple primer designed to remove gloss, soften, and penetrate bonding surfaces of PVC and CPVC pipe and fittings.
  • Highly recommended for use on high-gloss, hard finish bell end pipe or fittings.
  • 8oz.

Do it Best Regular Bodied Clear PVC Cement, 16oz

$105.00 TTD
P-4 Regular Bodied PVC Cement is designed for quick bonding and easy flow into joints making it perfect for schedules and classes of PVC pipe up to 4" (Schedule 40) and up to 2" for Schedule 80. It also has a low volatile organic compound content and rated for use between 40 °F and 110 °F (4 °C–43 °C) to meet environmental requirements.
 
  • Meets NSF and ASTM D2564 standards
  • Clear, translucent liquid applied via built‑in dauber
  • Suitable for potable water, pressure, drain‑waste‑vent, and conduit applications

Do it Best Regular Bodied Clear PVC Cement, 32oz

$176.00 TTD
P-4 Regular Bodied PVC Cement is designed for quick bonding and easy flow into joints making it perfect for schedules and classes of PVC pipe up to 4" (Schedule 40) and up to 2" for Schedule 80. It also has a low volatile organic compound content and rated for use between 40 °F and 110 °F (4 °C–43 °C) to meet environmental requirements.
  • Meets NSF and ASTM D2564 standards
  • Clear, translucent liquid applied via built‑in dauber
  • Suitable for potable water, pressure, drain‑waste‑vent, and conduit applications

Do it Best Regular Bodied Clear PVC Cement, 8oz

$66.00 TTD
P-4 Regular Bodied PVC Cement is designed for quick bonding and easy flow into joints making it perfect for schedules and classes of PVC pipe up to 4" (Schedule 40) and up to 2" for Schedule 80. It also has a low volatile organic compound content and rated for use between 40 °F and 110 °F (4 °C–43 °C) to meet environmental requirements.
  • Meets NSF and ASTM D2564 standards
  • Clear, translucent liquid applied via built‑in dauber
  • Suitable for potable water, pressure, drain‑waste‑vent, and conduit applications

Do it Best Wet Set-Medium Bodied PVC Cement, 16oz

$128.00 TTD
Do it Best Wet-Set Medium Bodied PVC Cement is a fast-setting PVC cement that's engineered for reliable performance in wet conditions. Its blue formula ensures easy application and visual confirmation, making it ideal for various plumbing and irrigation projects.
  • Meets environmental regulations for volatile organic compounds
  • Provides a balance between ease of application and strong adhesion
  • Excellent choice for professionals seeking a dependable solution for wet condition applications
  • Compliant with ASTM D2564 and suitable for potable water, pressure, conduit, and DWV systems.
  • Suitable for all schedules and classes of PVC pipe and fittings up to 6 inches in diameter with interference fit