Forney E7014 Mild Steel High Deposition Electrode, 1/8 In., 1 Lb.
$90.00 TTD
Forney Mild Steel High Deposition Electrode
- Mild steel, “Super Contact”, iron powder-type electrode with medium to shallow penetration.
- Smooth arc characteristics, good arc stability, and low spatter.
- Excellent for sheet metal and ornamental ironwork on poorly fitted joints.
- Use anywhere ease of operation and good appearance is required.
- 1/8 In., 1 Lb.
3 in stock
SKU:
313743
Category: Electrode
Description
Forney Mild Steel High Deposition Electrode
Mild steel, “Super Contact”, iron powder-type electrode with medium to shallow penetration. Smooth arc characteristics, good arc stability, and low spatter. Excellent for sheet metal and ornamental iron work on poorly fitted joints. Use anywhere ease of operation and good appearance is required.
Mild steel, “Super Contact”, iron powder-type electrode with medium to shallow penetration. Smooth arc characteristics, good arc stability, and low spatter. Excellent for sheet metal and ornamental iron work on poorly fitted joints. Use anywhere ease of operation and good appearance is required.
Additional information
| Brand | Forney |
|---|
Shipping & Delivery
Related products
1/8IN 1LB SS ELECTRODE
$470.00 TTD
Stainless alloy "easy all steel" specialty welding electrodes are the ultimate rods for most grades of steel using any stick electrode power source. Features a superior combination of tensile strength and elongation.
- Best suited to horizontal fillet welds.
- Arc is so ionized that you cannot short it out.
1LB 1/8 7018 ELECTRODE
$98.00 TTD
Suitable for all positions on hard steels where no pre-heat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod. Designed for welding low, medium, and high carbon steels as well as some higher strength low alloy steel.
- For frames, trailer hitches, and chassis.
- Features excellent restart capability.
1LB 1/8 7018AC ELECTRODE
$118.00 TTD
Suitable for all positions on hard steels where no pre-heat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod.
- For frames, trailer hitches and chassis.
- AC mild steel "Low Hydrogen" welding rods easily produce quality results on smaller amperage AC/DC welders.
1LB 3/32 7018 ELECTRODE
$99.00 TTD
1LB 3/32 E7014 ELCTRODE
$90.00 TTD
Forney E4043 Aluminum Electrode, 1/8 In., 1/2 Lb.
$350.00 TTD
Forney DC Aluminum Electrode
- DC aluminum "aluminarc" specialty welding electrodes are the highest strength alloy for arc and torch welding of low alloy aluminum.
- Excellent for cast, wrought, and extruded aluminum in all positions.
- Can also be used as a torch brazing alloy.
- Typical applications include truck beds, loading ramps and docks, banisters, stairs, diamond plates, irrigation piping, engine blocks, transmission housings, and railroad frogs.
- 1/8 In., 1/2 Lb.
Forney E6011 Mild Steel Deep Penetration Electrode, 1/8 In., 1 Lb.
$98.00 TTD
Forney Mild Steel Deep Penetration Electrode
- Mild steel, "Supersixty", all-position rod with strong arc force for deep penetration.
- Fast metal solidification facilitates welding in vertical and overhead positions.
- Light slag allows for easy clean-up.
- Excellent for rusty steel because of strong arc force.
- Useful for galvanized tanks, steel casting, and pressure pipe.
- 1/8 In., 1 Lb.
Forney E6011 Mild Steel Deep Penetration Electrode, 3/32 In., 1 Lb.
$105.00 TTD
Forney Mild Steel Deep Penetration Electrode
- Mild steel, "Supersixty", all-position rod with strong arc force for deep penetration.
- Fast metal solidification facilitates welding in vertical and overhead positions.
- Light slag allows for easy clean-up.
- Excellent for rusty steel because of strong arc force.
- Useful for galvanized tanks, steel casting, and pressure pipe.
- 3/32 In., 1 Lb.
