Shop
2PK 18V LXT 5AH BATTERY
Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications.
- Battery resists self-discharge and remains ready for use even after long periods of storage.
- Delivers consistent power and run time in extreme temperatures (-4 F/-20 C).
Makita 16 Gauge Nibbler
The Makita JN1601 Nibbler has a large 1/4 stroke for clean and precise work in keystone plate, deck plate and other corrugated sheet materials. The JN1601 has an ergonomic and slim body design for easy gripping, is extremely light for easy handling, and has a built-in thickness gauge for convenience.
Makita 16 Gauge Shear
The Makita 16 Gauge Shear combines power and improved ergonomics for a range of metal cutting applications. The powerful 3.3 AMP motor delivers 4,000 SPM, with a minimum cutting radius of 1-3/16” for precision applications. Additional features include a lock-on switch for continuous operation, and a built-in thickness gauge for added convenience.
Makita 18 Volt LXT Lithium-Ion Corded/Cordless Work Light (Bare Tool)
The 18V LXT lithium-ion corded/cordless LED (light-emitting diode) floodlight (DML805) offers the convenience of corded or cordless operation, and provides bright and even lighting for large workspaces without the high heat of halogens.
- At full brightness, it provides 750 lumens of light and 450 lumens on low mode.
- Adjusting knobs enable the user to direct the floodlight to the desired angle.
- The fast-charging 18V LXT lithium-ion 4.0 Ah battery (sold separately) delivers 10.5 hours of continuous illumination on a single charge.
- AC (alternating current) cord is easily stored and wrapped around the mounting stand base.
- An integrated handle can be used as a hanging hook for user convenience.
- Light will flash to alert the user when the battery charge is low.
- Compact at only 8-3/8 In. long.
- Worklight can be mounted on optional tripod light stand individually or with two floodlights (tripod light stand not included).
- Worklight can be mounted on an optional pipe clamp light stand (pipe clamp light stand not included).
Makita 18 Volt LXT Lithium-Ion Rapid Optimum Battery Charger
For use with Makita 18V LXT batteries. Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize life and actively controls current, voltage and temperature. Rapid Optimum Charger has a built-in fan to cool the battery during the charging process, which is engineered to facilitate a fast charge time and helps produce more lifetime work. Energy Star Qualified.
- For use with Makita 18V LXT batteries
- Rapid Optimum Charger with built-in chip
- Built-in fan to cool battery
Makita 18V LXT Cordless String Trimmer & Blower Combo Kit
With zero emissions and lower noise, the 18V LXT Brushless Cordless 2-Pc. Combo Kit is a welcome solution for clean-up applications. It's powered by one 18V LXT 4.0Ah Battery. The combo kit includes a blower (XBU03Z) and trimmer (XRU23Z).
- Includes LXT Brushless Blower and Trimmer, Charger and (1) 18V LXT 4.0Ah Battery
- Blower features cruise control lever on variable speed trigger for power and run time management
- In-line fan design on blower provides better tool balance and improved ergonomics
- String trimmer features high/low button for power management
- Features Extreme Protection Technology (XPT)
Makita 2-Tool 18V LXT Lithium-Ion Brushless Hammer Drill/Driver & Impact Driver Cordless Tool Combo Kit
The 18V LXT Lithium-Ion Cordless 2-Piece Combo Kit packs two compact cordless tools with efficient brushless motors for a full range of drilling, driving, and fastening applications. The XT269M includes a versatile hammer driver-drill with all-metal gear construction for applications in wood, metal and masonry. Hammer driver-drill features Extreme Protection Technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions. Includes (1) 18V LXT compact brushless 1/2 In. hammer drill/driver (XPH12Z), (1) 18V LXT brushless impact driver (XDT13Z), (2) 18V LXT lithium-ion 4.0 Ah batteries (BL1840B), (1) 18V LXT lithium-ion rapid optimum charger (DC18RC) and (1) tool bag.
- Variable 2-speed 1/2 In. Hammer Driver-Drill (0-500 & 0-2,000 RPM) with brushless motor delivers 530 In./Lb. of max torque
- Variable speed Impact Driver (0-3,400 RPM & 0-3,600 IPM) with brushless motor delivers 1,500 In./Lb. of max torque
- For a full range of drilling, driving, and fastening applications
Makita 4-1/2 Inch 6-Amp Angle Grinder
Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life. Slide switch design with lock-on for added user convenience. Protective zig-zag varnish seals the armature from dust and debris for longer tool life. All-ball bearing design and metal gear housing for added durability. Machined bevel gears provide up to 2 times longer service life. Side handle is positioned at an increased 20 deg (degrees angle for added comfort. Two-position adjustable side handle for operator convenience. Double insulated.
- 6 Amp motor delivers 11,000 RPM
- Small diameter (2-1/4 In.) barrel grip
- Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life
- Side handle is positioned at an increased 20 degree angle for added comfort
Makita 5/16 Inch Multi-Purpose Masonry Drill Bit
Makita Drill Bit is suitable for use with concrete, tile, brick, slate, limestone, wood, sandwich materials. Ideal for use in applications where a range of materials are encountered. Features Tungsten Carbide tip for fast and efficient drilling.
- Drill Bit
- Suitable for use with Concrete, Tile, Brick, Slate, Limestone, Wood, Sandwich Materials
- Eliminates need to switch between bit types
- Features Tungsten Carbide tip for fast and efficient drilling
- Wide Flutes enable quick and efficient material extraction
- Dimensions: 5/16" x 2-7/16 x 4-3/4"
Makita Air Compressor Oil Level Sight Gauge MAC 2400
Makita Base BO4556
Makita Bushing 9404
Makita Concrete Planer 5″
Makita Cordless Screwdriver
This Makita Cordless Screwdriver is made using high quality materials that make it sturdy and long lasting. It drives screws at a much faster rate and without any hassle. This kit is ideal for professionals and also for home use.
- Cordless Screwdriver
- Convertible: straight form or pistol form
- Handle is adjustable from 0 to 60 degrees
- LED light works via a separate switch on top
- 80pc bit set
Makita Hammer Drill with Bit Set
Makita Hammer Drill is engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life.
- Hammer Drill
- 3 Operation mode: hammering, hammering with rotation, rotation
- Speed and torque in reverse are the same as forward rotation by using brush holder unit
- Large trigger switch and lock on button
Makita Lithium-Ion Drill Impact Kit
Cordless drill/driver with 2 speeds, 0-600 and 0-1900 rpm (revolutions per minute), delivers up to 480 In./Lb. (inches per pound) of max torque. Ergonomically designed handles with rubberized soft grips provide increased comfort.
- Drill Impact Kit
- Includes (1) 18V LXT 1/2 In. drill/driver, (1) 18V LXT impact driver , (1) 18V LXT lithium-ion charger , (2) 18V 1.5 Ah lithium-ion batteries, and (1) tool bag.
- Cordless
Makita Oil Gauge Gasket Mac 700
This gasket form a mechanical seal that fills the space between two or more mating surfaces. Its goal is to prevent leakage from, or into, the joined objects while under compression. They can fill irregularities and increase the likelihood of sealability.
- Gauge Gasket
- Increase likelihood of sealibility
- Prevent leakage
- Compatible with MAC2400 2.5, MAC5200 and MAC700
Makita Sanding Pad (B04556)
Sanding Pad is made from durable material for longer life.
Designed for use with commonly available 4-1/2" x 5-1/2" abrasive paper sheets.
Features:
EFFICIENCY : Designed for use commonly available 4-1/2 Inches x 5-1/2 Inches abrasive paper sheets
DURABILITY : Durable construction
PERFORMANCE : For use with the Makita Finishing Sander model BO4556
INCLUDES : Backing pad
Makita Switch
Makita X-LOCK 4-1/2×1/4 x7/8 Inch Grinding Cut-Off Wheel
The X-LOCK Type 27 General Purpose Abrasive Grinding Wheels are ideal for the general grinding of ferrous metals, including alloy steel, carbon steel, stainless steel, cast iron, and wrought iron. These wheels are constructed of high-purity white aluminum oxide abrasive grains for increased performance and added durability.
- Type 27 depressed center design for aggressive grinding on the face of the wheel
- Grinding wheel with a coarse 36 grit
- For use on ferrous metals including stainless steel, alloy steel, carbon steel, cast iron and more
- For use with Makita X-LOCK Angle Grinder models
Makita X-Lock Stain Steel Grinding Wheel 5×1/4x 7/8 Inch
Makita X-Lock Grinding Wheel is engineered for efficient material removal and long-lasting performance and is designed for use with Makita X-Lock angle grinders. This 5-inch wheel delivers fast, tool-free changes and reliable results for professional grinding applications.
- Ideal for heavy-duty grinding tasks on metal and other materials
- Enables fast, tool-free wheel changes for improved productivity and reduced downtime
- 1/4-inch thick wheel provides consistent, aggressive material removal and extended service life