Builder's Hardware
Hillman 5 Inch Zinc T-Plate
Hillman Hardware Essentials T-plates are great for restoration projects or new project. T-plates are used for connecting wooden joints. Features pre-drilled holes with a beveled edge to ensure your t-plate is installed flush against the surface. Available in several sizes to best fit your needs.
- Features pre-drilled holes with a beveled edge
- Used for connecting wooden joints
- 5 Inch
Hillman 8 Inch Zinc Mending Plate
Hillman Hardware Essentials zinc mending plates (8 x 7/8 inch) are traditionally used on wooden furniture joints. Use to strengthen worn furniture or build a new household piece. Zinc finish provides rust and corrosion resistance to allow both interior and exterior applications.
- Rust and corrosion resistance
- Zinc finish
- 8 Inch
Hillman 8 x 1-1/4 Inch Zinc Corner Brace
Hillman Corner 2-1/2 Inch Zinc Brace 4Pk
Hillman Hardware Essentials zinc corner braces (2-1/2 x 5/8 inch) 4 Pack are great for wooden DIY projects. Add extra reinforcement for inside right angles. Zinc finish provides rust and corrosion resistance to allow both interior and exterior applications.
- Rust and corrosion resistance
- Zinc finish
- 2-1/2 Inch
- 4 Pack
Hillman Inside 1-1/2 Inch Zinc Corner Brace
Hillman Hardware Essentials zinc corner braces(1-1/2 x 3/4 inch) are great for wooden DIY projects. Add extra reinforcement for inside right angles. Zinc finish provides rust and corrosion resistance to allow both interior and exterior applications
- Add extra reinforcement for inside right angles
- Rust and corrosion resistance
- Zinc finish
National Catalog 115 6 In. x 1-1/8 In. Zinc Corner Brace
National Catalog 115BC Thru V115 Series Corner Braces
National Catalog Model No. 115BC thru V115 series. This corner brace or reinforcing angle is designed for chests, screens, windows, furniture, etc.
Product design allows for quick and easy repair of general household items. Made of steel. Box loose items come bar coded in box without screws.
National Catalog Corner Brace Zinc 3/4 x 1/2 Inch
This corner brace or reinforcing angle is designed for chests, screens, windows, furniture, etc. Product design allows for quick and easy repair of general household items.
- Designed for chests, screens, windows, furniture
- Used for reinforcing inside of right-angle corner joints
- Screw holes are countersunk
- Zinc Plated finish
- Made of steel
- Size: 3/4" x 1/2"
National Catalog Corner Brace Zinc 8 x 1-1/4 Inch
National Catalog corner brace or reinforcing angle is designed for chests, screens, windows, furniture, etc. Product design allows for quick and easy repair of general household items. Made of steel.
- Designed for chests, screens, windows, furniture
- Used for reinforcing inside of right-angle corner joints
- Screw holes are countersunk
- Zinc Plated Finish
Plylox 1/2 In. Hurricane Clip (20 Count)
Seachoice 2-3/8 In. x 1/2 In. Polished Steel Angle Bracket Corner Brace
Simpson Strong-Tie 15/32 In. Plywood Clip
Panel Sheathing Clips are used to brace unsupported panel edges when sheathing meets edge-to-edge without a rafter for support.
- Select the same size sheathing clip as the panel thickness.
- Keeps panels even for a level plain on the structure.
- Quick installation, no nails needed.
- Provides a 1/8" gap between plywood panels as recommended by the American Plywood Association.
- 20-gauge galvanized steel.
Simpson Strong-Tie 2 x 1-1/2 x 1-3/8 Inch Reinforcing Angle
Simpson Strong-Tie 3?6 Inch Mending Plate
Simpson Strong-Tie 4-7/8 Inch Framing L-Angle
Simpson Strong-Tie 7/16 Inch Plywood Clip
Panel Sheathing Clips are used to brace unsupported panel edges when sheathing meets edge-to-edge without a rafter for support.
- Select the same size sheathing clip as the panel thickness.
- Keeps panels even for a level plain on the structure.
- Quick installation, no nails needed.
- Provides a 1/8" gap between plywood panels as recommended by the American Plywood Association.
- 20-gauge galvanized steel.
Simpson Strong-Tie 7/8 x 6-9/16 Inch Brick Tie
Simpson Strong-Tie Deck Post Connector
The DTT2 is a safe, cost-effective way to attach deck-railing posts to the deck framing.
- The post is tied back into the deck joists, rather than to the rim joist alone; the connection is stronger than typical through-bolt installations and complies with IRC and IBC code requirements regarding handrail and guardrail post connections for decks.
- The DTT2 also complies with the new IRC requirements for laterally tying the deck to the house.
- Additionally, the versatile DTT2 is load rated as a holdown for light-duty shearwalls and braced wall panel applications.
- The DTT2 fastens easily to a single 2x joist or stud using Simpson Strong-Tie Strong-Drive screws (SDS) (included) and accepts a 1/2" machine bolt or anchor bolt.
- 14-gauge galvanized ZMAX steel.
Simpson Strong-Tie Framing Angle
This anchor's exclusive bending slot allows instant, accurate field bends for all 2-way and 3-way ties.
- A balanced, completely reversible design permits the A35 series angle to secure a great variety of connections.
- Used to reinforce 90 deg. connections.
- 18-gauge galvanized steel.
- Also available with ZMAX coating.
Simpson Strong-Tie Galvanized Steel 18 Gauge Twist Strap 1.25 x12 Inch
The LTS provides a tension connection between two members, resisting light to medium uplift loads at the rafter or heel of a truss. These economical light twist straps have a 2-in. bend section that reduces interference at the transition points between the two members. The LTS is engineered so the straps do not need to be wrapped over the truss to achieve the allowable load.
- Available with the bend reversed
- Versatile with many lengths offered to fit the specific application
- Made from 18-gauge steel
- Install with 10d common nails or 10d x 1-1/2 in. nails
- Galvanized (G90) for extra corrosion resistance
- Length: 12 inch
Simpson Strong-Tie H1Z Z-Max Hurricane Tie
Simpson Strong-Tie H2.5AZ Z-Max Hurricane Tie
Provides resistance to uplift and lateral forces.
- Designed to help counter the effect of high wind and seismic events on a structure.
- Used also for general tie purposes, strongback attachments, and as an all-purpose tie where 1 member crosses another.
- Install in pairs to connect 2x rafter to top plate.
- Some sizes are available with ZMAX coating.
Simpson Strong-Tie Medium L-Angle
Simpson Strong-Tie Rough ZMAX Powder Coated Post Base Black 4×4 Inch
Outdoor Accent post bases secure the post or column to concrete and are perfect for outdoor projects, such as pergolas, patio covers and other top-supported structures. These post bases feature a clean, simple design and provide ZMAX galvanization with black powder coat for extra corrosion resistance. The post base includes a 1-in. standoff from the concrete to help avoid post-end rot from moisture. Part of the Avant Collection.
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1-in. standoff to help prevent rot at post end
- Nominal post size: 4x4
- ZMAX galvanization with a black powder coated
- Extra corrosion resistance for exterior and treated-wood applications
Simpson Strong-Tie ZMAX Powder Coated L Strap Black 4×4 Inch
Outdoor Accents flat L straps from Simpson Strong-Tie bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 angle. This L strap is easily installed with Outdoor Accents structural screws and hex-head washers. Part of the Avant Collection.
- Install with Outdoor Accents structural screws and hex-head washer for a decorative look
- Made from 12-gauge steel
- ZMAX galvanization with black powder coat
- 4x4 Inch