Penta Emulsion Concrete Primer (20L)
$350.00 TTD
PENTA EMULSION CONCRETE PRIMER. PENTA Emulsion Primer is based on tough acrylic resin, and provides economical priming for newly constructed masonry walls and ceilings, hardboard, chipboard, cellotex and other wallboards. Priming of concrete and clay blockwork, cement rendered walls and ceilings. Also for interior use only, for priming of non- fire retardant treated fibre-building boards, most chipboards, gypsum plaster and wallboard. For best durability, it is not recommended for exterior use.
UPC Code: 047227956017
Features / Benefits: Good filling properties, High Opacity, Economical priming, Water-thinnable, clean-up, Easy to apply, Fungus resistant.
Coverage (Per Coat):
325-375 ft.2 /US Gal. per coat depending on porosity and texture.
Drying Time:
Touch: 20 minutes, Recoat: 1 hour
2 in stock
General Surface Preparation
New and unpainted: Ensure that surfaces are dry and cleaned free of all dirt, dust, grease, oil, wax, form oils, parting compounds, fungal and algal growths, and other debris and contaminants.
Masonry: Ensure that the surfaces have thoroughly dried out, allowing cement-rendered surfaces and cement-mortar pointing to cure for 4 weeks, and poured concrete for 8 weeks. Fill any surface defects (holes, cracks, crevices etc.) with an appropriate masonry filler. Rub down with rubbing stone/brick to remove all loose particles.
Fibre-Building Boards: (Softboard, Medium board, Hardboard). Sanding is not usually necessary and can damage glossy-surfaced hardboards. Fill nail holes and other surfaces defects with appropriate putty or filler. Oil- based putties and fillers should be used only on primed or sealed surfaces, and water-based putties and fillers on either.
Chipboard: Most unprimed/unsealed chipboards, except maybe for single layer, open-surface chipboards, can be directly primed with Penta Emulsion Primer White. Single layer, open surface chipboards may require sanding and overall filling with oil or water-based fillers if a high standard of finish is required, but the surface must be primed first with an oil-based primer such as Penta Wood Primer Undercoat.
Previously painted: Remove all loose, flaking, peeling, and semi-adherent paint, sanding to a feather-edge where necessary, to obtain a clean, firm, sound surface. Fill surface defects as for new surfaces. Rub down smooth glossy surfaces.
| Brand | Penta |
|---|