“Hardware Essentials Hook And Eye Turnbuckle Stainless Steel (1/4″-20 X 7-3/8″)” has been added to your cart. View cart
Hillman Corrugated Joint Fastener 3/8 Inch 5GA
$14.01 TTD
Corrugated bright steel joint fasteners; use only where appearance is not important, on the backside. A thin corrugated strip of steel that can be hammered into a wood joint to fasten it. A steel fastening device is used to join corner pieces. Use in hard and soft wood.
- Corrugated
- Steel material
- 3/8 Inch
3 in stock
SKU:
723630
Category: Fasteners
Description
Corrugated bright steel joint fasteners; use only where appearance is not important, on the backside. A thin corrugated strip of steel that can be hammered into a wood joint to fasten it. A steel fastening device is used to join corner pieces. Use in hard and soft wood.
Additional information
| Brand | Hillman |
|---|
Shipping & Delivery
Related products
3/16X36 HARDWOOD DOWEL
$4.01 TTD
3/4X48 HARDWOOD DOWEL
$39.00 TTD
4 Inch 5Lb Combo Drive Exterior Screw
$260.00 TTD
Do it PrimeGuard Plus ceramic finish coat with galvanized base. Combination drive, extra coarse thread screws with high corrosion-resistant, long-life coating. Packed in a cardboard box with a window. The screw color is similar to the color of treated wood. Compliant for treated lumber. Type 17 drill tip drives into the wood without pre-drilling. Thread pattern reduces wood splitting and friction. For all exterior applications, including decks, docks, fences and gazebos.
- Combination drive, extra coarse thread screws with high corrosion-resistant, long-life coating
- For all exterior applications, including decks, docks, fences, and gazebos
- 4 Inch
- 5 lb
7/8X36 HARDWOOD DOWEL
$40.01 TTD
7/8X36 OAK DOWEL
$85.50 TTD
Glue-in Nylon Dowel (m6 Thread X 3/8″ Drill Size)
$6.00 TTD
Glue-in nylon dowels are great for furniture assemblies. They should be secured in place using wood glue for best performance.
Brand: Hillman
Inches-Metric: Inches
Interior-Exterior: Interior
Thread Type: USS Coarse
Base Material: Nylon
Diameter: 3/8"
Finish: White
Package Type: Refill
Primary Color: White
Product Size: M6 x 3/8"
Threads Per Inch: 1/mm
Hardware Essentials Hook And Eye Turnbuckle Stainless Steel (1/4″-20 X 7-3/8″)
$60.00 TTD
Hardware Essentials Hook and Eye Turnbuckles are great for adjusting tensions between rope or cables. Great to pair with anchor shackles. One hook is located at one end of the turn buckle and an eye at the other. Slowly turn either to adjust tension. Available in several sizes. Also available in several finishes.
Brand: Hardware Essentials
Base Material: Steel
Weight Rating: 1040lb
Finish: Stainless Steel
Package Type: Flagged
Primary Color: Stainless Steel
Product Size: 1/4"-20 x 7-3/8"
Threads Per Inch: 20
Hardware Essentials U-bolt Round Saddle Zinc (5/16″ X 3-3/4″ X 1-3/8″)
$33.00 TTD
Hardware Essentials U-Bolt Round Saddle Zinc (5/16" x 3-3/4" x 1-3/8") are great for piping projects. Traditionally used for wire cable, piping, and much more. Also available in several sizes. U-bolt measurements are as follows diameter x inside length x width between legs.
Brand: Hardware Essentials
Base Material: Steel
Diameter: 1/2"
Finish: Zinc
Package Type: Flagged
Product Length: 7"
Product Size: 5/16" x 3-3/4" x 1-3/8"
