Sold out
Do it Best 0.5 Oz. Quick Set Epoxy (2-Pack)
$38.00 TTD
Do it Best Quick Set Epoxy
Quick setting epoxy adhesive fills small gaps. This product repairs appliances, tool, cookware, etc. Resists acids, oils, salt water, and solvents. Bonds metal, wood, glass, china, fiberglass, and more. 1200 P.S.I. strength. Sets in 5 minutes and 24 hours to cure. Carded. Two 1/2 oz. tubes. Hardener and resin.
Out of stock
Related products
J-B Weld 4oz ClearWeld Pro Epoxy 2Pk
ClearWeld is a quick setting, multipurpose two-part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld has a 1:1 mixing ratio, sets in five minutes and cures in one hour. With a tensile strength of 4400 psi, ClearWeld sets to a hard, permanent bond.
- Bonds to tile, most plastics, ceramic, glass, wood and metal
- Set time 5 minutes
- Dries clear
- 2 Pack
- 4oz
KWIKWELD EPOXY SYRINGE
A faster setting version of The Original JB Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing.
- 1:1 mixing ratio
- Sets in 6 minutes and is fully cured in 4 to 6 hours.
ORIGINAL COLDWELD EPOXY
The Original ColdWeld two-part epoxy system provides strong, lasting repairs to metal and multiple surfaces.
- Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded, and drilled after curing. J-B Weld has a tensile strength of 3960 psi and sets to a hard bond overnight.
- It can withstand temperatures up to 550 degrees F when fully cured.
Simpson Strong-Tie Epoxy Adhesive 22oz
Simpson Strong-Tie Epoxy Adhesive is a two-component, high solids, an epoxy-based system for use as a high-strength, non-shrink anchor grouting material. Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle. Use for threaded rod anchoring, rebar doweling, bonding hardened concrete to hardened concrete, pick-proof sealant around doors, windows and fixtures and paste-over for crack injection. Features a steel body for ultimate strength and lightweight. The handle is positioned under the cartridge for balance and ease of use. Cartridges snap-lock into position. (Tool not included).
- Features a steel body
- Two-component, resin and hardener
- Use as a high-strength, non-shrink anchor grouting material