USG Sheetrock Brand UltraLight Mold Tough Gypsum Board (1/2″)
$162.00 TTD
Sheetrock Brand UltraLight Mold Tough 1/2 Inch Gypsum Board is the first and lightest 1/2 Inch moisture- and mold-resistant panel available. These panels are easier to lift, carry and install and are ideal in new and remodel construction where moisture and mold resistance is desired. Panels feature tapered long edges for easy finishing.
Intended for use in:
Commercial or residential applications where 1/2 in. (12.7 mm) panels with moisture and mold
resistance are desired
New or repair and remodel construction
Non-fire-rated wood- or steel-framed wall and ceiling applications
Interior tile substrate in dry locations or areas with limited water exposure
Protected exterior soffit and ceiling applications
Brand: USG
Size: 1/2″
126 in stock
USG Sheetrock Brand UltraLight Panels Mold Tough are lightweight 1/2 Inch (12.7 mm) gypsum panels that feature proprietary core and paper technologies, resulting in a high strength-to-weight ratio composite design.
The non-combustible, moisture-resistant gypsum core is encased in moisture and mold-resistant, 100% recycled green face and brown back papers, and the face paper is folded
around the long edges to reinforce and protect the core.
When tested in accordance with ASTM D3273, Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber, the panels meet or exceed ASTM C1396 specifications.
The ends of the panels are cut square and even, while the long edges are tapered, allowing joints to be reinforced and concealed with USG Sheetrock Brand joint treatment systems.
| Brand | USG |
|---|