Simpson Strong-Tie Epoxy Adhesive 22oz
$412.00 TTD
Simpson Strong-Tie Epoxy Adhesive is a two-component, high solids, an epoxy-based system for use as a high-strength, non-shrink anchor grouting material. Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle. Use for threaded rod anchoring, rebar doweling, bonding hardened concrete to hardened concrete, pick-proof sealant around doors, windows and fixtures and paste-over for crack injection. Features a steel body for ultimate strength and lightweight. The handle is positioned under the cartridge for balance and ease of use. Cartridges snap-lock into position. (Tool not included).
- Features a steel body
- Two-component, resin and hardener
- Use as a high-strength, non-shrink anchor grouting material
7 in stock
Simpson Strong-Tie Epoxy Adhesive is a two-component, high solids, an epoxy-based system for use as a high-strength, non-shrink anchor grouting material. Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle. Use for threaded rod anchoring, rebar doweling, bonding hardened concrete to hardened concrete, pick-proof sealant around doors, windows and fixtures and paste-over for crack injection. Features a steel body for ultimate strength and lightweight. The handle is positioned under the cartridge for balance and ease of use. Cartridges snap-lock into position. (Tool not included).
| Brand | SIMPSON Strong-Tie |
|---|
Related products
J-B Weld .85oz MarineWeld Epoxy Syringe
- Water and weatherproof
- For maintaining and repairing boating and marine products
- Sets in 5 minutes
- Cures in 1 hour to white color
J-B Weld (2) 5 Oz. KwikWeld Professional Epoxy
- After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded, and drilled after curing.
- Has a 1:1 mixing ratio, sets in six minutes, and is fully cured in four to six hours.
- Cures to a dark grey color, is rated at a tensile strength of 2424 psi, and will withstand temperatures up to 300 degrees F.
- (2) 5 Oz.
J-B Weld 0.85oz Black Plastic Bonder Epoxy Syringe
- Works on thermoset and carbon fiber composites, thermoplastics, coated metals and concrete
- Great for filling dents, replacement bonding of plastics and general repairs
- Features a no waste, no mess cap
ORIGINAL COLDWELD EPOXY
- Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded, and drilled after curing. J-B Weld has a tensile strength of 3960 psi and sets to a hard bond overnight.
- It can withstand temperatures up to 550 degrees F when fully cured.
