Pratt & Lambert Aquanamel Waterborne Alkyd Satin Interior/Exterior Enamel

Our new exterior paint is formulated with 100% acrylic resins for durability and colorfast performance. Use on most exterior building surfaces including wood, masonry, stucco and metal. It is resistant to fading, peeling and blistering and covers with 1 coat when applied over properly prepared surfaces. Covers approximately 400 Sq. Ft. per gallon. Dries to the touch in 2 Hrs. and to recoat in 4 to 6 Hrs. Apply with brush, roller, paint pad or sprayer. Easy to clean up with soap and water. Available in tint bases and packaged colors. Low temperature application down to 35 Deg. F. Backed by lifetime warranty.

• Flat Paint & Primer In One
• 100% acrylic resins for durability and colorfast performance
• Use on exterior wood, masonry, stucco and metal
• Resistant to fading, peeling and blistering
• High Hiding White

Our new formula offers the finest quality interior wall and trim satin finish enamel. The soft decorative sheen complements any decor while providing 1 coat coverage on interior primed plaster, metal, wallboard, wood and masonry. Provides a scrubbable finish that is spot and stain. Apply with brush or roller at package consistency. Apply at temperatures above 50 degree and at a rate of 400 square foot per gallon. Allow 4 hours drying time before applying a second coat. Clean up spills and equipment immediately with soap and warm water.

• Use on interior primed plaster, metal, wallboard, wood and masonry
• Satin finish enamel
• Ultra white
• 1 Gallon

Self-priming paint provides long-term durability that is washable and scrubbable, and can be applied directly to previously painted surfaces or uncoated drywall. 2 coats are recommended when painting over uncoated drywall, or when using vibrant colors. Use on properly prepared drywall, plaster, masonry and bare wood. Suggested areas are living rooms, bedrooms, and dining rooms. 1 gallon will cover 350 square foot to 400 square foot, less on rough or textured surfaces. Dries to a flat matte sheen. Allow at least 4 hours of drying time before recoating. Apply at temperatures between 50 Deg. F and 90 Deg. F. Excellent touch-up. Do not thin.

• Use on properly prepared drywall, plaster, masonry and bare wood
• Extra Deep Base
• Flat
• 5 Gallon

Aquanamel Waterborne Alkyd Enamel is a premium quality coating that offers superb flow and leveling, and a smooth durable finish.

• Time to recoat: 4 hours.
• Neutral Base, 1 Gal.