Kaleidoscope Supreme Emulsion White (Quart)

$42.75 TTD

KALEIDOSCOPE SUPREME EMULSION WHITE. An economy flat emulsion having good durability with scrub, fungus and water resistance. Provides economical performance for interior brick, concrete and cement plaster/ rendered walls and ceilings. Also suitable for interior use on appropriately primed building boards, woods and metal surfaces. Primers are available based on specified surfaces. Flat Gloss.

UPC Code: 692764030647
Product Code: D203

Features / Benefits: Excellent water resistance, sealer for the construction field, resists scrubbing.

Coverage (per coat):
6 – 8sq.m. per litre
65 -85 sq.ft. per litre

Drying Time:
Touch Dry 15 – 20 mins.
Re-coat 1 hour.

Disclaimer: Every effort was made to make the colours on screen as close as possible to the ones you’ll use, unfortunately, due to the technical differences between colour print reproductions and paint manufacture, the colour swatches represented may not exactly match the actual paint colours. For accuracy, it is recommended to obtain a colour card and/or test paint before purchasing.

12 in stock

SKU: 692764030647 Category:
Description

General Surface Preparation

New and Unpainted: Ensure surface is dry and cleaned free of all dust, dirt, oil, grease, mortar splashes, moss, algae and other debris.

Masonry: Poured concrete must be allowed to cure for at least 60 days, while cement plaster/rendering should be 30 days. Fill any defects with appropriate masonry filler.

Wood & Building Boards: Fill any crevices, cracks, holes etc. with Kaleidoscope Linseed Oil Putty. Then sand with abrasive paper to a smooth finish.

Metal: Clean to Hand Tool finish SSPC-SP-2 or Power Tool finish SSPC-SP-3.

Previously Painted: Remove any loose, flaking, peeling and semi-adherent paint to obtain a clean, firm, sound surface. Fill surface defects and treat as for New & Unpainted.

Treatment for Algae & Fungus Infection: Use water to wash affected areas thoroughly. Dilute 1 part Domestic Bleach with 1 part water and apply liberally, by brush or sponge to the areas. Follow with one application of Kaleidoscope Sterilising Solution and allow to dry overnight.

Directions for Use

New and Unpainted: Apply 2 coats

Previously Painted: Apply 1 coat
If powdery residue exists after cleaning – Kaleidoscope Penetrating Liquid

On old gloss paint: Kaleidoscope Universal Undercoat
On bare metal areas appropriate Kaleidoscope Metal Primer

Then over entire surface: 1 or 2 coats Kaleidoscope Supreme Emulsion

Application: Brush, roller or spray. Thin up to 12% for spraying. Stir thoroughly before using and frequently during use.

Additional information
BrandKaleidoscope
Shipping & Delivery