Kaleidoscope Marine Varnish (Gallon)
$284.00 TTD
KALEIDOSCOPE MARINE VARNISH. A tough high gloss clear varnish having excellent weathering properties. All interior and exterior wooden surfaces.
UPC Code: 692764082257
Product Code: M 102
Coverage (Per Litre):
8 – 10 sq.m. @ 25 microns d.f.t.
85 – 110 sq.ft. @ 1 mil. d.f.t.
Drying Time:
Touch Dry 2 – 4 hrs.
Re-Coat 16 hrs.
Hard Dry 16 hrs.
5 in stock
General Surface Preparation
Bare Wood: Fill any defects with transparent wood filler. Then thoroughly abrade with fine sandpaper to obtain a smooth surface and dust off.
Previously Varnished: If there is cracking, peeling, blistering, etc. strip the entire surface to bare wood. Then treat as “Bare Wood” above.
b. If the old varnish is adhering firmly, wash thoroughly to remove any dust, dirt, grease and allow to dry. Then abrade with fine sandpaper and dust off.
Directions for Use
Bare Wood: Apply 1st coat Kaleidoscope Marine Clear Varnish, thinned 10%, and allow to dry overnight. Then thoroughly abrade with fine sand-paper to remove the raised wood grain “nibs”. Follow with 2 coats Kaleidoscope Marine Clear Varnish, allowing to dry overnight between coats.
Previously Varnished: After appropriate surface preparation, apply 1 or 2 coats Kaleidoscope Marine Clear Varnish, allowing to dry overnight between coats.
| Brand | Kaleidoscope |
|---|
