Kaleidoscope Epoxy Floor Enamel Grey (Gallon)

$297.00 TTD

KALEIDOSCOPE EPOXY FLOOR ENAMEL GREY. A fast drying tough durable finish having good abrasion resistance. Also good resistance to water, oil, grease and household chemicals. Formulated specifically for concrete and wooden floors.

UPC Code: 692764065151
Product Code: D305

Features / Benefits:: Strong Adhesion, Long Lasting, Waterproof, Salt and Acid Resistance, Reduced maintenance Costs, Nontoxic when dry

Coverage:
8 – 10 sq. m. per litre
85 – 110 sq. It. per litre

Drying Time:
Touch Dry 1 – 2 hrs.
Re-Coat overnight
Hard Dry overnight

Disclaimer: Every effort was made to make the colours on screen as close as possible to the ones you’ll use, unfortunately, due to the technical differences between colour print reproductions and paint manufacture, the colour swatches represented may not exactly match the actual paint colours. For accuracy, it is recommended to obtain a colour card and/or test paint before purchasing.

4 in stock

SKU: 692764065151 Category:
Description

General Surface Preparation

Concrete: Allow to cure for at least 60 days. Floors at ground level must have effective dam proofing to avoid subsequent paint blistering. Also treat with 10% muriatic acid solution, apply 1 litre to 5 sq.m. (55sq.ft.) for 10- 15 mins to remove surface layer 01 laitance to avoid subsequent paint peeling. Allow to dry thoroughly. Then brush free 01 all residues to obtain clean surface.

Wood: Fill any cracks, crevices and holes with Kaleidoscope Linseed Oil Putty, sand with abrasive paper to a smooth finish. Treat all knots with 2 thin coats Kaleidoscope Knotting Varnish.

Previously Painted: Remove any peeling and blistering paint by scraping and rubbing down with abrasive paper. Remove traces of wax or polish with Kaleidoscope Water-Rinsable Degreasing Solvent.

Directions for Use

:

New and Unpainted: Apply 1st coat thinned 10%, then apply 2nd coat of Kaleidoscope Epoxy Floor Enamel.

Previously Painted: To bare concrete and wood areas apply 1 coat Kaleidoscope Epoxy Floor Enamel. Then over the entire surface apply 1 coat of Kaleidoscope Epoxy Floor Enamel.

Additional information
BrandKaleidoscope
Shipping & Delivery