Kaleidoscope 2000 Weatherproof Gloss White (Gallon)

$300.00 TTD

KALEIDOSCOPE 2000 WEATHERPROOF GLOSS WHITE. A high quality alkyd paint providing a tough durable gloss finish with excellent exterior weathering and fungus resistance. Also suitable as a primer on wood. For interior and exterior wood, metal and concrete surfaces that has been appropriately primed. Primers are available based on specified surfaces. High Gloss.

UPC Code: 692764054056
Product Code: D301

Features / Benefits: Excellent Adhesion, Excellent Sealing Properties, Moisture Resistant, Excellent Durability, Provides a Uniform, Even Surface for Topcoating, AntiFungal, Non-toxic (No Lead or Mercury).

Coverage (per coat):
8 – 10 sq.m. per litre
85 – 110 sq.ft. per litre

Drying Time:
Touch Dry: 4 – 6 hrs
Over-Coat: Overnight
Hard Dry: Overnight

Disclaimer: Every effort was made to make the colours on screen as close as possible to the ones you’ll use, unfortunately, due to the technical differences between colour print reproductions and paint manufacture, the colour swatches represented may not exactly match the actual paint colours. For accuracy, it is recommended to obtain a colour card and/or test paint before purchasing.

7 in stock

SKU: 692764054056 Category:
Description

General Surface Preparation

New and Unpainted: Ensure surface is dry and cleaned free of all dust, dirt, oil, grease, mortar splashes and other debris.

Masonry: Poured concrete must be allowed to cure for at least 60 days, while cement plaster/rendering should be for 30 days. Fill any defects with appropriate masonry filler.

Wood: Fill any cracks, crevices, holes, etc. with Kaleidoscope Linseed Oil Putty. Rub down with abrasive paper to obtain a smooth finish. Apply 2 thin coats of Kaleidoscope Knotting Varnish to all knots.

Metal: Clean to Hand Tool finish SSPC-SP-2 or Power Tool finish SSPC-SP-3.

Previously Painted: Remove any loose, flaking, peeling and semi-adherent paint to obtain a clean, firm, sound surface. Fill surface defects and treat as for New & Unpainted.

Treatment for Algae & Fungus Infection: Use water to wash affected areas thoroughly. Dilute 1 part Domestic Bleach with 1 part water and apply liberally, by brush or sponge, to the areas. Follow with one application of Kaleidoscope Sterilising Solution and allow to dry overnight.

Directions for Use

New and Unpainted: Apply 2 coats.

Previously Painted: Apply 1 coat on bare substrate areas of the appropriate primer as recommended in New & Unpainted. Then over entire surface apply 1 or 2 coats Kaleidoscope 2000 Gloss Paint.

Application: Brush, roller or spray. Thin up to 10% for spraying. Stir thoroughly before using and frequently during use.

Additional information
BrandKaleidoscope
Shipping & Delivery