Drylok Wetlook Clear Concrete Sealer, 1 Gal.
$528.00 TTD
Drylok Wetlook Concrete Sealer
Just like natural and man-made stone, concrete and masonry are porous materials that will start to break down, dust, pit, crack, and/or stain when subjected to weather, water, oil, and UV rays. The only way to prevent damage and deterioration is to protect your surfaces with a good quality sealer.
4 in stock
DRYLOK WetLook High Gloss Sealer is a clear, non-yellowing, water-base sealer formulated for use on horizontal and vertical masonry surfaces where a high gloss, wet look finish is desired.
DRYLOK WetLook High Gloss Sealer is a premium quality finish that protects and beautifies stucco, brick, bare or painted concrete, pavers, stamped concrete, and exposed aggregate, as well as natural and artificial stone.
Resists de-icing salts; SaltLok Technology helps prevent the leaching of minerals and salt. Use on bare masonry or previously painted surfaces. Interior/exterior. Dry time: 1 hour. Coats: 1 is recommended, 2 maximum.
| Brand | DRYLOK |
|---|
Related products
Drylok 5 Gallon White Basement & Masonry Waterproofer Concrete Sealer
- Ideal for interior, exterior masonry walls, basement walls and more
- Ceramic fortified for the ultimate in waterproof protection
- Specially formulated to resist mildew growth
Drylok Clear Concrete Sealer Protector, 1 Gal.
- Latex base DRYLOK Concrete Protector provides clear, weatherproof protection against deterioration caused by de-icing salts, household cleaners, acid, gasoline, oil, and weathering.
- Formulated with our exclusive SALTLOK Technology, it penetrates into the surface and provides superior resistance to unsightly efflorescence stains (salt deposits) that are often visible on brick, block, and poured concrete surfaces.
- Protect interior, exterior, vertical, and horizontal masonry surfaces like stucco, brick, and concrete.
- Prevents excessive dusting, surface cracking, and pockmarking.
- Use on bare masonry or previously painted surfaces.
- Application tools: brush, roller, spray, squeegee, pad applicator.
- Dry time: 1 hour.
- Recoat time: 6 hours.
- Coats: 1-2.
- 1 Gal.
Drylok White Waterproofer Concrete Sealer, 1 Gal.
- Ceramic fortified for the ultimate in waterproof protection.
- Specially formulated to resist mildew growth, with the incorporation of a nonhazardous green biocide, on the paint film.
- Stops 12 P.S.I., which's greater than a wall of water 26 ft. high.
- Tested to ASTM D-7088 resistance to hydrostatic pressure and ASTM D-6904 resistance to wind-driven rain.
- Clean up with soap and water.
- Coverage: 75 to 100 sq. ft. per gallon.
- Tintable with 50% of the color formula.
- Not to exceed 2 fl. oz. of colorant per gallon.