Drylok Clear Floor & Wall Masonry Waterproofer, 1 Gal.
$660.00 TTD
Drylok Clear Floor & Wall Masonry Waterproofer. Non-pigmented waterproofer formulated for floor and wall surfaces are easy to clean and leaves a non-yellowing finish.
- Perfect for waterproofing interior and exterior concrete floors, poured concrete walls, split-faced block, concrete and cinder block, stone, brick, stucco, and pre-cast decorative items.
- Incorporates ISP CleanGuard, environmentally safe green biocides, to resist the growth of mildew on the dry paint film.
- 1 Gal.
10 in stock
SKU:
770863
Categories: Masonry Waterproofer, Sealers Waterproofers & Preservatives
Description
Drylok Clear Floor & Wall Masonry Waterproofer
Non-pigmented waterproofer formulated for floor and wall surfaces are easy to clean and leaves a non-yellowing finish. Perfect for waterproofing interior and exterior concrete floors, poured concrete walls, split-faced block, concrete and cinder block, stone, brick, stucco, and pre-cast decorative items. Incorporates ISP CleanGuard, environmentally safe green biocides, to resist the growth of mildew on the dry paint film. Tested in accordance to requirements of ASTM D-7088 (American Society for Testing and Materials) Resistance to Hydrostatic Pressure at 4 psi (pounds per square inch) and ASTM D-6904 Resistance to Wind Driven Rain of 98 mph.
Non-pigmented waterproofer formulated for floor and wall surfaces are easy to clean and leaves a non-yellowing finish. Perfect for waterproofing interior and exterior concrete floors, poured concrete walls, split-faced block, concrete and cinder block, stone, brick, stucco, and pre-cast decorative items. Incorporates ISP CleanGuard, environmentally safe green biocides, to resist the growth of mildew on the dry paint film. Tested in accordance to requirements of ASTM D-7088 (American Society for Testing and Materials) Resistance to Hydrostatic Pressure at 4 psi (pounds per square inch) and ASTM D-6904 Resistance to Wind Driven Rain of 98 mph.
Additional information
| Brand | DRYLOK |
|---|
Shipping & Delivery
Related products
Drylok Clear Concrete Sealer Protector, 1 Gal.
$480.00 TTD
Drylok Concrete Sealer Protector. Just like natural and man-made stone, concrete and masonry are porous materials. They will start to break down, dust, pit, crack, and/or stain easily when subjected to the weather, water, oil, and UV rays. The only way to prevent damage and deterioration is to protect surfaces with a good quality sealer.
- Latex base DRYLOK Concrete Protector provides clear, weatherproof protection against deterioration caused by de-icing salts, household cleaners, acid, gasoline, oil, and weathering.
- Formulated with our exclusive SALTLOK Technology, it penetrates into the surface and provides superior resistance to unsightly efflorescence stains (salt deposits) that are often visible on brick, block, and poured concrete surfaces.
- Protect interior, exterior, vertical, and horizontal masonry surfaces like stucco, brick, and concrete.
- Prevents excessive dusting, surface cracking, and pockmarking.
- Use on bare masonry or previously painted surfaces.
- Application tools: brush, roller, spray, squeegee, pad applicator.
- Dry time: 1 hour.
- Recoat time: 6 hours.
- Coats: 1-2.
- 1 Gal.
Drylok Clear Natural Look Concrete Sealer, 1 Gal.
$350.00 TTD
Drylok White Latex Masonry Waterproofer, 1 Gal.
$525.00 TTD
Drylok Latex Masonry Waterproofer
Formulated for waterproofing all interior, exterior, above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basements, swimming pools, bird baths, fish ponds, and foundations. Stops water under pressure up to 10 P.S.I. per sq. in.
Drylok White Latex Masonry Waterproofer, 5 Gal.
$2,450.00 TTD
Drylok White Waterproofer Concrete Sealer, 1 Gal.
$620.01 TTD
Drylok Basement & Masonry Waterproofer Concrete Sealer. Smoother waterproof paint is perfect for the most demanding conditions. Ideal for interior, exterior, above or below grade masonry walls, basement walls, retaining walls, foundations, landscape walls, cinder blocks, concrete blocks, bare concrete swimming pools, stucco, and brick.
- Ceramic fortified for the ultimate in waterproof protection.
- Specially formulated to resist mildew growth, with the incorporation of a nonhazardous green biocide, on the paint film.
- Stops 12 P.S.I., which's greater than a wall of water 26 ft. high.
- Tested to ASTM D-7088 resistance to hydrostatic pressure and ASTM D-6904 resistance to wind-driven rain.
- Clean up with soap and water.
- Coverage: 75 to 100 sq. ft. per gallon.
- Tintable with 50% of the color formula.
- Not to exceed 2 fl. oz. of colorant per gallon.
MasterSeal 581 50 Lb. Gray Masonry Waterproofer
$702.00 TTD
MasterSeal 581 Masonry Waterproofer
Formerly known as Thoroseal. MasterSeal 581 is a Portland cement-based coating for concrete and masonry that provides protection against water, dampness, and seepage.
Mixed with MasterEmaco A 660, MasterSeal 581 creates a low maintenance and highly durable waterproof barrier that is NSF certified for potable water applications.
RedGard 1 Gal. Elastomeric Waterproofing Membrane
$995.00 TTD
RedGard Ready-To-Use Elastomeric Waterproofing Membrane
- Ready-to-use elastomeric, waterproofing and crack prevention membrane for all interior or exterior commercial and residential tile and stone installations.
- Easily applied with roller, trowel, or sprayer producing a continuous moisture barrier with outstanding adhesion.
- Reduces crack transmission in ceramic tile or stone floors.
- Meets ANSI A118.10 for waterproofing membrane.
- Areas of use: Concrete, cement backer boards, wonder board, exterior grade plywood (interior, dry areas for crack isolation only), exterior decks, Gypsum drywall.
- 1 Gallon.
Rust-Oleum Woodlife Clear Water-Based Classic Wood Preservative
$330.00 TTD
