POWER TOOLS
2PK 18V LXT 5AH BATTERY
Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications.
- Battery resists self-discharge and remains ready for use even after long periods of storage.
- Delivers consistent power and run time in extreme temperatures (-4 F/-20 C).
M12-M18 RAPID CHARGER
The M18 and M12 rapid charge station is the fastest charging solution in the industry. With the ability to charge six-packs four times faster, the station charges three batteries simultaneously while charging each pack up to 40% faster.
- The charger accepts up to (3) M18 and (3) M12 battery packs, reducing the amount of time spent changing out batteries and increasing productivity on the job site.
- Featuring REDLINK Intelligence, it communicates directly with the battery to monitor cell voltage, temperature, and charge status to optimize the performance and extend the life of the pack.
- The station has integrated hang holes for vertical mounting, a pass-through plug to conserve outlet space, and a convenient carry handle to transport packs on and off the job site.
Genesis 20V 2-Tool Lithium-Ion Drill/Driver & Impact Driver Cordless Tool
Compact, lightweight and powerful. The 20-Volt Lithium-Ion Drill Driver delivers 350 In./Lb. of torque power. Its high-speed transmission delivers 2 speeds (0-350 RPM and 0-1300 RPM) to ensure power and speed. 20-Volt Lithium-Ion Impact Driver delivers an incredible 1062 In./Lb. of torque power. The high-power variable speed transmission delivers 0-2200 RPM and 0-3800 IPM (impacts per minute). Both tools have ergonomic handles with rubber inserts. Both include built-in LED work lights, onboard battery power indicators and electric brakes. Combo Kit includes: (2) 20-Volt compact Lithium-ion 1.5Ah battery packs, compact charger, high-quality contractor's bag, and #2 Phillips power screwdriver bit.
- Compact, lightweight and powerful
- Built-in LED Work Light
- On-Board battery power indicator
- Electric Brake
Genesis 20V 1/2 Inch Cordless Drill/Driver Kit
The Genesis GLD2012B Cordless Drill is Fully Featured and Designed to Take on the Most Demanding Projects. The 1/2" Single Sleeve All-Metal Ratcheting Chuck Securely Holds Bits. The High-Performance Motor Produces up to 450 in-lb of Torque, and the 2-Speed Gear Box Provides the Power and Speed to Match your Task. An LED Fuel Gauge Indicates the Remaining Charge.
- Compact, Lightweight, and Powerful
- Battery Holds its Charge up to 18 Months in Storage
- High-Performance Motor Produces up to 350 in-lbs of Torque
- Two Variable Speed Ranges for Versatility
- Built-In LED Work Light
- 21+1 Torque/Clutch Settings
- Electric Brake
Makita 18 Volt LXT Lithium-Ion Corded/Cordless Work Light (Bare Tool)
The 18V LXT lithium-ion corded/cordless LED (light-emitting diode) floodlight (DML805) offers the convenience of corded or cordless operation, and provides bright and even lighting for large workspaces without the high heat of halogens.
- At full brightness, it provides 750 lumens of light and 450 lumens on low mode.
- Adjusting knobs enable the user to direct the floodlight to the desired angle.
- The fast-charging 18V LXT lithium-ion 4.0 Ah battery (sold separately) delivers 10.5 hours of continuous illumination on a single charge.
- AC (alternating current) cord is easily stored and wrapped around the mounting stand base.
- An integrated handle can be used as a hanging hook for user convenience.
- Light will flash to alert the user when the battery charge is low.
- Compact at only 8-3/8 In. long.
- Worklight can be mounted on optional tripod light stand individually or with two floodlights (tripod light stand not included).
- Worklight can be mounted on an optional pipe clamp light stand (pipe clamp light stand not included).
Dewalt 20V Max Brushless Pruning Chainsaw, 8″
The Dewalt 20V Max Brushless Pruning Chainsaw. is engineered for efficiency and ease of use. with it being lightweight and cordless, this chainsaw delivers high cutting performance making it ideal for branches, shrubs, and small trees. The included 3.0 Ah battery and charger ensure reliable, extended runtime for professional or home use.
- Powerful Brushless Motor
- Compact & Lightweight Design
- Includes 20V Max 3.0 Ah lithium-ion battery and charger ready to use right out of the box
20V Max Lithium-Ion Drill & Reciprocating Saw Cordless Tool Combo Kit
This PORTER-CABLE combo kit comes with a 20V MAX* compact battery that operates both the Drill/Driver and Reciprocating Saw. The drill/driver features a high-performance motor that delivers the power needed to tackle tough jobs.
- Compact and lightweight to fit into tight spaces
- High-performance motor and 2-speed gear box to deliver the power needed
- Tool-free blade release for quick changes
- Its variable-speed trigger and pivoting shoe give you ultimate control
- Contoured over-molded handle for more comfort
- Includes (1) 20V MAX lithium-ion battery, charger, carry bag
- Model No. PCC601LB
Makita Lithium-Ion Drill Impact Kit
Cordless drill/driver with 2 speeds, 0-600 and 0-1900 rpm (revolutions per minute), delivers up to 480 In./Lb. (inches per pound) of max torque. Ergonomically designed handles with rubberized soft grips provide increased comfort.
- Drill Impact Kit
- Includes (1) 18V LXT 1/2 In. drill/driver, (1) 18V LXT impact driver , (1) 18V LXT lithium-ion charger , (2) 18V 1.5 Ah lithium-ion batteries, and (1) tool bag.
- Cordless
Dewalt Powerstack 20V MAX Lithium-Ion 5.0 Ah Tool Battery
The Dewalt Powerstack 20V MAX Compact Battery is 50% more powerful, 25% more compact, and 15% lighter. This battery features an impact-resistant, rubber overmold base and utilizes revolutionary pouch cell battery technology to provide twice the lifetime. Engineered to get into tight spaces without sacrificing performance, our most powerful, most compact, and lightweight battery is compatible with the 20V MAX tools and chargers you already own.
- Durable, overmolded base provides impact resistance
- Battery provides 2X lifetime
- LED fuel gauge displays state-of-charge
- Battery works with all DEWALT 20V MAX tools and chargers
Makita 2-Tool 18V LXT Lithium-Ion Brushless Hammer Drill/Driver & Impact Driver Cordless Tool Combo Kit
The 18V LXT Lithium-Ion Cordless 2-Piece Combo Kit packs two compact cordless tools with efficient brushless motors for a full range of drilling, driving, and fastening applications. The XT269M includes a versatile hammer driver-drill with all-metal gear construction for applications in wood, metal and masonry. Hammer driver-drill features Extreme Protection Technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions. Includes (1) 18V LXT compact brushless 1/2 In. hammer drill/driver (XPH12Z), (1) 18V LXT brushless impact driver (XDT13Z), (2) 18V LXT lithium-ion 4.0 Ah batteries (BL1840B), (1) 18V LXT lithium-ion rapid optimum charger (DC18RC) and (1) tool bag.
- Variable 2-speed 1/2 In. Hammer Driver-Drill (0-500 & 0-2,000 RPM) with brushless motor delivers 530 In./Lb. of max torque
- Variable speed Impact Driver (0-3,400 RPM & 0-3,600 IPM) with brushless motor delivers 1,500 In./Lb. of max torque
- For a full range of drilling, driving, and fastening applications
Westinghouse Cordless Impact Drill
This Cordless Impact drill combines innovation and efficiency to provide users with a superior drilling and fastening experience. It is a specialized type designed for driving screws and bolts with increased torque and efficiency.
- Cordless Drill
- With keyless metal chuck
- Torque control
- 2 Speed gearbox
- LED light control
Genesis 20V Lithium-Ion 1.5 Ah Tool Battery
20V Lithium-ion replacement battery is the replacement battery pack for Genesis 20-Volt cordless drill and Genesis 20-Volt cordless impact driver. Fits all tools in the Genesis 20-Volt Lithium-Ion power tool lineup. The battery can hold its charge for over 18 months in storage.
- Keep a backup battery on hand to ensure no down time due to charging
- Replacement battery pack for Genesis 20-Volt cordless tools
- High capacity 1.5Ah battery
Makita Cordless Screwdriver
This Makita Cordless Screwdriver is made using high quality materials that make it sturdy and long lasting. It drives screws at a much faster rate and without any hassle. This kit is ideal for professionals and also for home use.
- Cordless Screwdriver
- Convertible: straight form or pistol form
- Handle is adjustable from 0 to 60 degrees
- LED light works via a separate switch on top
- 80pc bit set
Milwaukee M18 REDLITHUM High Output XC8.0 Tool Battery
The Milwaukee M18 REDLITHIUM High Output XC8.0 Battery Pack provides 50% more power and runs 50% cooler vs. M18 REDLITHIUM XC battery packs. The optimized combination of smaller size and increased power of the 18V battery provides a great solution for the entire range of M18 products. The lithium-ion battery delivers fade-free power and runs substantially cooler through heavy applications, allowing trade professionals to push their cordless tools throughout a wide application range.
- M18 REDLITHIUM Hgh Output XC8.0 Battery Pack
- Delivers fade-free power and runs substantially cooler through heavy applications
- Provides increased power in extreme-cold weather conditions below 0 F
- Fully compatible with all M18 solutions
Black and Decker GoPAK Cordless Drill 4-Tool Combo Kit
Give style and innovation to your home with this incredible combo kit, a model that offers you all the remodeling alternatives, so that you can carry out your project in a unique and great way. It includes: cordless drill/driver, jigsaw, sander and LED flash light to illuminate your workspace.
- 4-Tool Combo Kit
- Contains: Drill, Jig Saw , sander, work light
- Battery powered
- Voltage: 12
- Colour: Black
Dewalt Powerstack 20 Volt MAX Lithium-Ion 5 Ah Tool Battery & Charger Kit
The Dewalt PowerStack 5.0 Ah 20V MAX battery is our most powerful battery in its class. The 20V MAX Dewalt PowerStack 5.0Ah Battery utilizes revolutionary pouch cell technology to deliver 50% more power, 50% more work per charge, and 2X the lifespan. Compatible with all DEWALT 20V MAX* tools and chargers, the DEWALT POWERSTACK 5.0 Ah Battery features an impact-resistant, rubber overmolded base and includes 3-LED Fuel Gauge state of charge indicator.
- Packed with Power Get 50% more power to tackle tough jobs
- More Efficient Battery is 50% more efficient making it DEWALTs most efficient battery in its class+++.
- Durable Design: The non-marring over-molded rubber base also helps to protect finished surfaces
- Long-lasting: 2X lifespan** provides more overall investment value
- At-a-Glace Charge Status: Quickly check state-of-charge with 3-LED fuel gauge
- Compatibility with all DEWALT20V MAX* tools & chargers
Dewalt 20V Brushless Chainsaw
Dewalt 20V Brushless Chainsaw is designed for efficiency and durability. This lightweight tool delivers the cutting power you need for yard work, construction, and maintenance tasks without the hassle of gas.
- Maximizes runtime and motor life for consistent, powerful cuts
- Easy to maneuver and reduces user fatigue during extended use
- Quick and simple adjustments ensure optimal cutting performance on the go
Makita Hammer Drill with Bit Set
Makita Hammer Drill is engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life.
- Hammer Drill
- 3 Operation mode: hammering, hammering with rotation, rotation
- Speed and torque in reverse are the same as forward rotation by using brush holder unit
- Large trigger switch and lock on button
Makita 16 Gauge Shear
The Makita 16 Gauge Shear combines power and improved ergonomics for a range of metal cutting applications. The powerful 3.3 AMP motor delivers 4,000 SPM, with a minimum cutting radius of 1-3/16” for precision applications. Additional features include a lock-on switch for continuous operation, and a built-in thickness gauge for added convenience.
Makita 4-1/2 Inch 6-Amp Angle Grinder
Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life. Slide switch design with lock-on for added user convenience. Protective zig-zag varnish seals the armature from dust and debris for longer tool life. All-ball bearing design and metal gear housing for added durability. Machined bevel gears provide up to 2 times longer service life. Side handle is positioned at an increased 20 deg (degrees angle for added comfort. Two-position adjustable side handle for operator convenience. Double insulated.
- 6 Amp motor delivers 11,000 RPM
- Small diameter (2-1/4 In.) barrel grip
- Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life
- Side handle is positioned at an increased 20 degree angle for added comfort
4.5AMP LAMINATE TRIMMER
Perfect for most trimming, small edge forming, and hinge routing applications.
- A powerful motor provides the power and durability required to cut in various materials.
- Ergonomics allow for comfortable, single-handed control.
- The precision-machined, cast-aluminum fixed base provides long-term durability.
- Extra-large locking knob allows for a quick motor release and/or course depth adjustment.
- Micro-set thumbwheel enables quick and accurate bit height adjustments.
- The spindle lock button allows for single wrench bit changes.
- LED (light-emitting diode) light and clear sub-base ensure maximum visibility in operation.
Makita 16 Gauge Nibbler
The Makita JN1601 Nibbler has a large 1/4 stroke for clean and precise work in keystone plate, deck plate and other corrugated sheet materials. The JN1601 has an ergonomic and slim body design for easy gripping, is extremely light for easy handling, and has a built-in thickness gauge for convenience.
Dewalt Cordless Circular Saw Kit 20V 6 1/2″
Combining performance and versatility, the 20V MAX 6-1/2" Cordless Circular Saw is ready to take on a variety of cutting applications. It features a powerful brushless motor that delivers 4,950 rpm for fast, accurate, and consistent cutting.
- Cordless Circular Saw
- Electric brake
- Quickly adjust the bevel capacity from 0 - 50 degrees with the tool-free bevel lever
- Compatible with the DEWALT AirLock system or standard 35 mm dust extractor
- Dimensions: 15.5" x 11.56" x 8.18"
DEWALT 7-1/4 Inch 15-Amp Lightweight Circular Saw
Product features: Among 1 of the lightest saws in its class at 8.8 lb. 15A motor, powerful enough for even the toughest applications. Anti-snag ball bearing lower guard provides smooth guard operation and long life in harsh environments. Tough cord provides longer durability against cord pull outs. Integrated dust blower function cleans the line of sight during cuttings. Durable high grade aluminum smooth base for accurate cuts. Clear line of sight aids in blade visibility from any angle.
- Powerful enough for even the toughest applications
- Integrated dust blower function
- Durable high grade aluminum smooth base for accurate cuts
- Tough cord
MK Morse Metal Devil 7 Inch Metal Cutting Circular Saw
The MK Morse Metal Devil 7-Inch Circular Saw is the ideal instrument for all-metal cutting such as steel, thin steel, aluminum and stainless steel. This circular saw offers a safer, cleaner way to cut metal. The special motor maintains torque at optimum RPM’s for cutting through metal smoothly and efficiently.
- 7-Inch circular saw
- Ideal instrument for all-metal cutting
- Cuts metal smoothly and efficiently
HAND TOOLS
Stanley Keyhole Drywall Jab Saw 7 Inch
Stanley Keyhole Drywall Jab Saw Keyhole saws 4-way blade positioning cuts curves, circles, and frets into places where ordinary hacksaws cannot reach. Includes one wood cutting blade and one metal cutting blade. With 2 blades" 4-way" carded blade length. Lightweight, pistol grip handle.
- 4-way blade positioning cuts curves, circles, and frets into places where ordinary hacksaws cannot reach
- Includes one wood cutting blade and one metal cutting blade
- Lightweight, pistol grip handle
Channellock 1/2 In. Drive 10 mm 12-Point Shallow Metric Socket
Channellock 1/2 In. Drive Socket
- Color band denotes SAE/Metric measurement for easy identification.
- Sockets have textured bands for greater gripping power.
- 6-point versions offer more surface area making them less likely to slip off or round over corners, while 12-point versions provide more contact points making them easier to fit onto bolts.
- Chrome vanadium steel.
- 1/2 In. Drive 10 mm 12-Point.
Forney ER70S-6 Mild Steel Mig Wire, 0.035 In., 2 Lb.
Forney Mild Steel Mig Wire
- ER 70S-6 mild steel MIG (GMAW) welding wire is a high-strength mild steel MIG wire.
- Ideal for auto body repair and fabrication on most ferrous metals.
- Contains a high level of manganese and silicon for a superior weld, even on rusty, dirty steel.
- Produces a smooth bead that requires less grinding.
- Not recommended for aluminum engines.
- 0.035 In., 2 Lb.
Forney ER70S-6 Mild Steel Mig Wire, 0.024 In., 2 Lb.
Forney Mild Steel Mig Wire
- ER 70S-6 mild steel MIG (GMAW) welding wire is a high-strength mild steel MIG wire.
- Ideal for auto body repair and fabrication on most ferrous metals.
- Contains a high level of manganese and silicon for a superior weld, even on rusty, dirty steel.
- Produces a smooth bead that requires less grinding.
- Not recommended for aluminum engines.
- 0.024 In., 2 Lb.
1LB 1/8 7018AC ELECTRODE
Suitable for all positions on hard steels where no pre-heat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod.
- For frames, trailer hitches and chassis.
- AC mild steel "Low Hydrogen" welding rods easily produce quality results on smaller amperage AC/DC welders.
Forney E71T-GS 0.030 In. Flux Core Mild Steel Mig Wire, 2 Lb.
Forney Flux Core Mild Steel Mig Wire
- E71T-GS flux core MIG (GMAW) welding wire for mild steel is self-shielded mild steel all position flux cored MIG welding wire.
- Best suited to single pass applications with high travel speed.
- Moderate to low spatter.
- Although no gas is required, an Argon/CO2 mix will reduce spatter.
- Excellent on thin gauge mild steel.
- 0.030 In. 2Lb.
Marathon Universal Flat-Free Hand Truck Tire
Designed to fit the majority of hand trucks, generators, pressure washers, garden carts, and other small equipment. Tire is made out of solid, polyurethane foam. It provides the bounce and cushion of an air filled tire with the benefit of never going flat. Tire size is 4.10/3.50 to 4". Tire diameter is 10". Tire Width is 3.3". Tire comes mounted on a steel rim with a 2.25" offset hub and 5/8" ball bearings. The included parts kit contains a variety of spacers and 3/4" bearings to meet various hub and axle configurations to help adapt it to the equipment. Tire load capacity is 300 lb (pound).
- Truck Tire
- Tire is made out of solid, polyurethane foam
- Provides the bounce and cushion of an air filled tire with the benefit of never going flat
- Tire comes mounted on a steel rim with a 2.25" offset hub and 5/8" ball bearings
- The included parts kit contains a variety of spacers and 3/4" bearings
- Load capacity is 300 lbs
- Dimensions: 10" x 3.3"
Smith’s 2-Step Knife Sharpener Yellow
Smith’s 2-Step Knife Sharpener features two tungsten carbide blades with pre-set angles to ensure the perfect edge every time. Three or four strokes through the carbide sharpening slots will restore the edge on a very dull knife.
- Knife Sharpener
- Crossed carbide blades provide quick edge setting
- Crossed ceramic rods provide a razor sharp edge
- non-slip rubber feet for added safety
- Use on all types of knives, especially filet knives
- Colour: Yellow
Forney E71T-GS 0.035 In. Flux Core Mild Steel Mig Wire, 2 Lb.
Forney Flux Core Mild Steel Mig Wire
- E71T-GS flux core MIG (GMAW) welding wire for mild steel is self-shielded mild steel all position flux cored MIG welding wire.
- Best suited to single pass applications with high travel speed.
- Moderate to low spatter.
- Although no gas is required, an Argon/CO2 mix will reduce spatter.
- Excellent on thin gauge mild steel.
- 0.035 In. 2 Lb.
Stanley Wood Chisel 7/8 Inch
Stanley wood chisel is the perfect tool for your carpentry and cabinet work. It features an impact-resistant polypropylene handle and fully sharpened laminate on all sides. The hardened and tempered steel sheet holds the edge longer. The sheet comes with a rust-resistant coating. Includes blade tip cover, protects working edge when not in use.
- Perfect tool for your carpentry and cabinet work
- Rust-resistant coating
- Impact-resistant polypropylene handle
- 7/8 Inch
Core Home Multi-Tool Pliers
Core Home Multi-Tool with 12 functions including needle nose plier, grip plier, cable cutter, screwdriver, bottle/can opener, wrench, metal cutter, file and more. Ideal tool for camping, hiking, picnicking, fishing, climbing and other outdoorsy sports. The multi-functional tool is a perfect gift idea.
- Ideal tool for camping, hiking, picnicking, fishing etc.
- Perfect gift idea
- 12 functions
CLEARANCE SALE!
Wrought Iron Rosette (33/2), 9-13/16 Inch (D)
These Arteferro Wrought Iron components are uniquely Italian-designed, hand crafted with finely forged details. Iron rosettes are a perfect complement to iron railings, old door, wall partitions, metal furniture, iron gates etc.
Design/Style: Rosette
Selection Size: 15/32" X 1/4"
Diameter: 9-13/16"
Weight: 2.6lbs
Material: Wrought Iron
Southwire 14 AWG Solid THHN Green Electrical Wire 50′
This high-quality Southwire THHN wire is designed for reliable performance in a wide range of electrical installations. Its durable thermoplastic insulation and vibrant green color coding makes it ideal for grounding applications while ensuring long-lasting protection and easy identification. Perfect for residential, commercial, and industrial use.
- 14 AWG solid copper conductor for dependable conductivity and stable electrical performance.
- Heat-, moisture-, and abrasion-resistant THHN insulation for safe, long-lasting durability in various environments.
- Green color-coded jacket for clear identification in grounding and bonding applications.
Bussmann 20A NON Cartridge General Purpose Cartridge Fuse (2-Pack)
Bussmann 20A NON Cartridge General Purpose Fuse is designed for consistent performance, this fuse provides dependable protection for electrical circuits and equipment against overloads and short circuits. Ideal for residential, commercial, and light industrial applications.
- 20-amp, 250-volt general-purpose fuse for dependable circuit protection
- Time-delay design helps prevent unnecessary fuse blows from temporary surges
- Durable construction for long-lasting performance and easy installation
Arteferro Raw Leaf Stamped Right Hand 1-9/16 x 4-5/16 Inch
These Arteferro Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. Stamped wrought iron leaves have always been an inexpensive way to create simplistic or even sophisticated pieces of metal art. They would make excellent choices when looking to top off a wrought iron fence or gate.
- Design/Style: Raw Leaf Stamped Right Hand
- Italian-designed
- Material: Wrought Iron
- Size: 1-9/16" x 4-5/16"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Southwire 14 AWG 3-Conductor UFW/G Electrical Wire, 50′
The Southwire 14 AWG 3-Conductor UFW/G Electrical Wire delivers reliable performance for residential and light commercial wiring projects. It's designed for durability and safety, provides consistent conductivity and is ideal for indoor branch circuits, lighting, and general wiring applications. Its 50-foot length offers flexibility and convenience for a wide range of installations.
- High-quality copper conductors for stable, long-lasting electrical performance
- Includes grounding wire and meets industry standards for indoor wiring
- 50 ft. length makes it suitable for various residential and light commercial applications
Arteferro Leaf Design For 604/1 Wrought Iron Raw
These Arteferro Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. This Metal Art Leaf has a 1/8" leaf material and features a design to complement 604/1. These wrought iron leaves have always been an inexpensive way to create simplistic or even sophisticated pieces of metal art. They would make excellent choices when looking to top off a wrought iron fence or gate.
- Design/Style: Metal Leaf
- Italian-designed
- Material: Wrought Iron
- Size: 1/8"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Wrought Iron Large Butterfly (137/10), 6-7/8 Inch (W) X 4-15/16 Inch (H)
These Arteferro Wrought Iron components are uniquely Italian-designed, hand crafted with finely forged details. Arteferro's flowers and ornaments are also the perfect complement to wrought iron railings, wrought iron garden art or metal home accessories. Select from things like forged grapes, leaves, stamped leaves, or flowers to create a natural, wrought iron charm.
Design/Style: Flowers and Ornaments
Selection Size: 0.0197"
Width: 6-7/8"
Height: 4-15/16"
Weight: 0.15 lbs
Material: Wrought Iron
Arteferro Picket Wrought Iron 1/2 Inch Square With Single Bronze Basket
Arteferro Wrought Iron Pickets are one of the most important elements of the infill in a balustrade or fencing. The classic design displays refined taste structures and has the potential to add a little more uniqueness and variety to your wrought iron staircase or railing.
- Design/Style: Pickets
- Size: 1/2″ square
- Material: Wrought Iron
- Single-basket design
- Colour: Bronze
- Adds a little more uniqueness and variety to your wrought iron staircase or railing
Wrought Iron Panel (GD303/3), 16-1/16 Inch (W) X 39-3/8 Inch (H)
These Arteferro Wrought Iron components are uniquely Italian-designed, hand crafted with finely forged details. The Panels collection from Arteferro truly assist with making a wrought iron project an upscale. Whether it's the decorative iron gate entry, wrought iron door, or part of the focal point as you gaze to the wrought iron balcony the options are numerous.
Design/Style: Panels
Selection Size: 25/64"
Width: 16-1/6"
Height: 39-3/8"
Weight: 11lbs
Material: Wrought Iron
Romex 25 Ft. 14-3 Solid White NMW/G Electrical Wire
The Romex 14-3 Solid White NMW/G Electrical Wire is designed for safe, reliable residential wiring applications. Its durable construction and grounded design make it ideal for lighting circuits, general household wiring, and other indoor electrical installations. With a 25-foot length, it offers convenient flexibility for small to medium projects while maintaining high performance and compliance with industry standards.
- 14-gauge, 3-conductor solid copper wire for dependable power distribution and long-lasting performance
- NMW/G sheathing provides added protection and includes a ground wire for enhanced electrical safety
- 25 ft. length is perfect for repairs, upgrades, and targeted indoor wiring installations
Arteferro Left Hand Forged Leaf Wrought Iron Raw 7-1/16 x 5-1/8 x 5/32 Inch
These Arteferro Left Hand Forged Leaf Wrought Iron Raw components are uniquely Italian-designed, handcrafted with finely forged details. This Metal Art Leaf has a leaf design and features a 7 1/16" height. They are a perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates etc.
- Design/Style: Left Hand Forged Leaf
- Italian-designed
- Material: Wrought Iron
- Size: 7-1/16" x 5-1/8" x 5/32"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Arteferro Rosette Wrought Iron 9-7/8 Inch
These Arteferro Rosette Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. This Modern Rosette has a 9 7/8" width and features a 9 13/16" external diameter. They are a perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates etc.
- Design/Style: Rosette
- Italian-designed
- Material: Wrought Iron
- Size: 9-7/8"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Wrought Iron Rosette (33/1), 9-13/16 Inch (D)
These Arteferro Wrought Iron components are uniquely Italian-designed, hand crafted with finely forged details. Iron rosettes are a perfect complement to iron railings, old door, wall partitions, metal furniture, iron gates etc.
Design/Style: Rosette
Selection Size: 15/32" X 1/4"
Diameter: 9-13/16"
Weight: 2.4lbs
Material: Wrought Iron
Wrought Iron Flower (1406/3), 5-1/2 Inch (D)
These Arteferro Wrought Iron components are uniquely Italian-designed, hand crafted with finely forged details. Arteferro's flowers and ornaments are also the perfect complement to wrought iron railings, wrought iron garden art or metal home accessories. Select from things like forged grapes, leaves, stamped leaves, or flowers to create a natural, wrought iron charm.
Design/Style: Flowers and Ornaments
Selection Size: 1-9/16"
Diameter: 5-1/2"
Weight: 0.15 lbs
Material: Wrought Iron
Arteferro Gonzato Design Panel, (10-13/16″)
These Arteferro Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. This Gonzato Design is a very unique product line, where the classic motifs of wrought iron blend with a modern design consisting of simple and geometric lines. This Gonzato Design piece has a designer panel and features a 10 13/16" width.
- Design/Style: Gonzato Design Panel
- Italian-designed
- Material: Wrought Iron
- Size: 10 13/16" W
Arteferro Stamped Raw Leaf 3/16 Inch
These Arteferro Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. Stamped wrought iron leaves have always been an inexpensive way to create simplistic or even sophisticated pieces of metal art. They would make excellent choices when looking to top off a wrought iron fence or gate.
- Design/Style: Stamped Raw Leaf
- Italian-designed
- Material: Wrought Iron
- Size: 4-15/16" x 3-9/16" x 3/16"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Bussmann 30A BP/SL Time-Delay Plug Fuse (3-Pack)
Bussmann 30A BP/SL Time-Delay Plug Fuse is designed for residential and light commercial applications, this fuse provides dependable overload protection while allowing for temporary inrush currents, preventing unnecessary fuse blowouts. Ideal for protecting motor-driven appliances and power tools.
- Time-delay design prevents nuisance tripping from temporary surges
- Compatible with Edison-base fuse holders for easy installation
- Rated for up to 125 volts, providing dependable household circuit protection
Romex 12-3 Solid NMW/G Electrical Wire, Yellow 250′
Romex 12/3 Solid NMW/G Electrical Wire is designed for reliable power distribution in residential and commercial applications. It's designed with durable construction and a high-visibility yellow jacket to ensures safe, efficient installation for a wide range of interior wiring projects making it ideal for branch circuits, lighting, and outlet runs.
- High-quality 12/3 solid copper conductors for consistent performance and reduced electrical resistance
- Offers enhanced protection, visibility, and compliance with building standards
- Suitable for extensive wiring installations in homes, offices, and light commercial environments
Arteferro Sphere Hot Stamped 3-15/16 Inch
These Arteferro Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. Spheres make the perfect finishing touch to wrought iron railing projects. These wrought iron components compliment any traditional or modern commercial or home design weather.
- Italian-designed
- Designed to be combined with many other Arteferro components
- Raw wrought iron finish allows you to choose the finish that's perfect for your project
- Design/Style: Spheres
- Diameter: 3-15/16"
- Material: Wrought Iron
RCA 24-2 Stranded Speaker Wire, 100′
The RCA 100 Ft. 24-2 Stranded Speaker Wire is designed to deliver clear, reliable sound for home or professional installations. Its flexible stranded construction ensures easy routing around corners and tight spaces, making it ideal for speakers, amplifiers, and surround-sound systems.
- High-quality stranded copper wire for improved signal transmission and consistent audio performance
- Durable 100 ft. length provides ample reach for large rooms, multi-speaker setups, or custom installations
- Flexible, easy-strip insulation allows quick, hassle-free connections for both DIY users and professionals
Arteferro Brass Leaf Stamped 1-9/16″
These Arteferro Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. Stamped wrought iron leaves have always been an inexpensive way to create simplistic or even sophisticated pieces of metal art. They would make excellent choices when looking to top off a wrought iron fence or gate. This Metal Art Stamped Leaf has a brass stamped design and features a 4-5/16" width.
- Design/Style: Stamped Raw Leaf
- Italian-designed
- Material: Wrought Iron
- Size: 1-9/16" x 4-5/16"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
