POWER TOOLS
2PK 18V LXT 5AH BATTERY
Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications.
- Battery resists self-discharge and remains ready for use even after long periods of storage.
- Delivers consistent power and run time in extreme temperatures (-4 F/-20 C).
Genesis 20V 1/2 Inch Cordless Drill/Driver Kit
The Genesis GLD2012B Cordless Drill is Fully Featured and Designed to Take on the Most Demanding Projects. The 1/2" Single Sleeve All-Metal Ratcheting Chuck Securely Holds Bits. The High-Performance Motor Produces up to 450 in-lb of Torque, and the 2-Speed Gear Box Provides the Power and Speed to Match your Task. An LED Fuel Gauge Indicates the Remaining Charge.
- Compact, Lightweight, and Powerful
- Battery Holds its Charge up to 18 Months in Storage
- High-Performance Motor Produces up to 350 in-lbs of Torque
- Two Variable Speed Ranges for Versatility
- Built-In LED Work Light
- 21+1 Torque/Clutch Settings
- Electric Brake
Makita 2-Tool 18V LXT Lithium-Ion Brushless Hammer Drill/Driver & Impact Driver Cordless Tool Combo Kit
The 18V LXT Lithium-Ion Cordless 2-Piece Combo Kit packs two compact cordless tools with efficient brushless motors for a full range of drilling, driving, and fastening applications. The XT269M includes a versatile hammer driver-drill with all-metal gear construction for applications in wood, metal and masonry. Hammer driver-drill features Extreme Protection Technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions. Includes (1) 18V LXT compact brushless 1/2 In. hammer drill/driver (XPH12Z), (1) 18V LXT brushless impact driver (XDT13Z), (2) 18V LXT lithium-ion 4.0 Ah batteries (BL1840B), (1) 18V LXT lithium-ion rapid optimum charger (DC18RC) and (1) tool bag.
- Variable 2-speed 1/2 In. Hammer Driver-Drill (0-500 & 0-2,000 RPM) with brushless motor delivers 530 In./Lb. of max torque
- Variable speed Impact Driver (0-3,400 RPM & 0-3,600 IPM) with brushless motor delivers 1,500 In./Lb. of max torque
- For a full range of drilling, driving, and fastening applications
Westinghouse Cordless Impact Drill
This Cordless Impact drill combines innovation and efficiency to provide users with a superior drilling and fastening experience. It is a specialized type designed for driving screws and bolts with increased torque and efficiency.
- Cordless Drill
- With keyless metal chuck
- Torque control
- 2 Speed gearbox
- LED light control
Dewalt Powerstack 20V MAX Lithium-Ion 5.0 Ah Tool Battery
The Dewalt Powerstack 20V MAX Compact Battery is 50% more powerful, 25% more compact, and 15% lighter. This battery features an impact-resistant, rubber overmold base and utilizes revolutionary pouch cell battery technology to provide twice the lifetime. Engineered to get into tight spaces without sacrificing performance, our most powerful, most compact, and lightweight battery is compatible with the 20V MAX tools and chargers you already own.
- Durable, overmolded base provides impact resistance
- Battery provides 2X lifetime
- LED fuel gauge displays state-of-charge
- Battery works with all DEWALT 20V MAX tools and chargers
Genesis 20V 2-Tool Lithium-Ion Drill/Driver & Impact Driver Cordless Tool
Compact, lightweight and powerful. The 20-Volt Lithium-Ion Drill Driver delivers 350 In./Lb. of torque power. Its high-speed transmission delivers 2 speeds (0-350 RPM and 0-1300 RPM) to ensure power and speed. 20-Volt Lithium-Ion Impact Driver delivers an incredible 1062 In./Lb. of torque power. The high-power variable speed transmission delivers 0-2200 RPM and 0-3800 IPM (impacts per minute). Both tools have ergonomic handles with rubber inserts. Both include built-in LED work lights, onboard battery power indicators and electric brakes. Combo Kit includes: (2) 20-Volt compact Lithium-ion 1.5Ah battery packs, compact charger, high-quality contractor's bag, and #2 Phillips power screwdriver bit.
- Compact, lightweight and powerful
- Built-in LED Work Light
- On-Board battery power indicator
- Electric Brake
Dewalt Powerstack 20 Volt MAX Lithium-Ion 5 Ah Tool Battery & Charger Kit
The Dewalt PowerStack 5.0 Ah 20V MAX battery is our most powerful battery in its class. The 20V MAX Dewalt PowerStack 5.0Ah Battery utilizes revolutionary pouch cell technology to deliver 50% more power, 50% more work per charge, and 2X the lifespan. Compatible with all DEWALT 20V MAX* tools and chargers, the DEWALT POWERSTACK 5.0 Ah Battery features an impact-resistant, rubber overmolded base and includes 3-LED Fuel Gauge state of charge indicator.
- Packed with Power Get 50% more power to tackle tough jobs
- More Efficient Battery is 50% more efficient making it DEWALTs most efficient battery in its class+++.
- Durable Design: The non-marring over-molded rubber base also helps to protect finished surfaces
- Long-lasting: 2X lifespan** provides more overall investment value
- At-a-Glace Charge Status: Quickly check state-of-charge with 3-LED fuel gauge
- Compatibility with all DEWALT20V MAX* tools & chargers
Makita Cordless Screwdriver
This Makita Cordless Screwdriver is made using high quality materials that make it sturdy and long lasting. It drives screws at a much faster rate and without any hassle. This kit is ideal for professionals and also for home use.
- Cordless Screwdriver
- Convertible: straight form or pistol form
- Handle is adjustable from 0 to 60 degrees
- LED light works via a separate switch on top
- 80pc bit set
Dewalt 20V Brushless Chainsaw
Dewalt 20V Brushless Chainsaw is designed for efficiency and durability. This lightweight tool delivers the cutting power you need for yard work, construction, and maintenance tasks without the hassle of gas.
- Maximizes runtime and motor life for consistent, powerful cuts
- Easy to maneuver and reduces user fatigue during extended use
- Quick and simple adjustments ensure optimal cutting performance on the go
Genesis 20V Lithium-Ion 1.5 Ah Tool Battery
20V Lithium-ion replacement battery is the replacement battery pack for Genesis 20-Volt cordless drill and Genesis 20-Volt cordless impact driver. Fits all tools in the Genesis 20-Volt Lithium-Ion power tool lineup. The battery can hold its charge for over 18 months in storage.
- Keep a backup battery on hand to ensure no down time due to charging
- Replacement battery pack for Genesis 20-Volt cordless tools
- High capacity 1.5Ah battery
Black and Decker GoPAK Cordless Drill 4-Tool Combo Kit
Give style and innovation to your home with this incredible combo kit, a model that offers you all the remodeling alternatives, so that you can carry out your project in a unique and great way. It includes: cordless drill/driver, jigsaw, sander and LED flash light to illuminate your workspace.
- 4-Tool Combo Kit
- Contains: Drill, Jig Saw , sander, work light
- Battery powered
- Voltage: 12
- Colour: Black
20V Max Lithium-Ion Drill & Reciprocating Saw Cordless Tool Combo Kit
This PORTER-CABLE combo kit comes with a 20V MAX* compact battery that operates both the Drill/Driver and Reciprocating Saw. The drill/driver features a high-performance motor that delivers the power needed to tackle tough jobs.
- Compact and lightweight to fit into tight spaces
- High-performance motor and 2-speed gear box to deliver the power needed
- Tool-free blade release for quick changes
- Its variable-speed trigger and pivoting shoe give you ultimate control
- Contoured over-molded handle for more comfort
- Includes (1) 20V MAX lithium-ion battery, charger, carry bag
- Model No. PCC601LB
Milwaukee M18 REDLITHUM High Output XC8.0 Tool Battery
The Milwaukee M18 REDLITHIUM High Output XC8.0 Battery Pack provides 50% more power and runs 50% cooler vs. M18 REDLITHIUM XC battery packs. The optimized combination of smaller size and increased power of the 18V battery provides a great solution for the entire range of M18 products. The lithium-ion battery delivers fade-free power and runs substantially cooler through heavy applications, allowing trade professionals to push their cordless tools throughout a wide application range.
- M18 REDLITHIUM Hgh Output XC8.0 Battery Pack
- Delivers fade-free power and runs substantially cooler through heavy applications
- Provides increased power in extreme-cold weather conditions below 0 F
- Fully compatible with all M18 solutions
Makita Lithium-Ion Drill Impact Kit
Cordless drill/driver with 2 speeds, 0-600 and 0-1900 rpm (revolutions per minute), delivers up to 480 In./Lb. (inches per pound) of max torque. Ergonomically designed handles with rubberized soft grips provide increased comfort.
- Drill Impact Kit
- Includes (1) 18V LXT 1/2 In. drill/driver, (1) 18V LXT impact driver , (1) 18V LXT lithium-ion charger , (2) 18V 1.5 Ah lithium-ion batteries, and (1) tool bag.
- Cordless
M12-M18 RAPID CHARGER
The M18 and M12 rapid charge station is the fastest charging solution in the industry. With the ability to charge six-packs four times faster, the station charges three batteries simultaneously while charging each pack up to 40% faster.
- The charger accepts up to (3) M18 and (3) M12 battery packs, reducing the amount of time spent changing out batteries and increasing productivity on the job site.
- Featuring REDLINK Intelligence, it communicates directly with the battery to monitor cell voltage, temperature, and charge status to optimize the performance and extend the life of the pack.
- The station has integrated hang holes for vertical mounting, a pass-through plug to conserve outlet space, and a convenient carry handle to transport packs on and off the job site.
Dewalt 20V Max Brushless Pruning Chainsaw, 8″
The Dewalt 20V Max Brushless Pruning Chainsaw. is engineered for efficiency and ease of use. with it being lightweight and cordless, this chainsaw delivers high cutting performance making it ideal for branches, shrubs, and small trees. The included 3.0 Ah battery and charger ensure reliable, extended runtime for professional or home use.
- Powerful Brushless Motor
- Compact & Lightweight Design
- Includes 20V Max 3.0 Ah lithium-ion battery and charger ready to use right out of the box
Makita 18 Volt LXT Lithium-Ion Corded/Cordless Work Light (Bare Tool)
The 18V LXT lithium-ion corded/cordless LED (light-emitting diode) floodlight (DML805) offers the convenience of corded or cordless operation, and provides bright and even lighting for large workspaces without the high heat of halogens.
- At full brightness, it provides 750 lumens of light and 450 lumens on low mode.
- Adjusting knobs enable the user to direct the floodlight to the desired angle.
- The fast-charging 18V LXT lithium-ion 4.0 Ah battery (sold separately) delivers 10.5 hours of continuous illumination on a single charge.
- AC (alternating current) cord is easily stored and wrapped around the mounting stand base.
- An integrated handle can be used as a hanging hook for user convenience.
- Light will flash to alert the user when the battery charge is low.
- Compact at only 8-3/8 In. long.
- Worklight can be mounted on optional tripod light stand individually or with two floodlights (tripod light stand not included).
- Worklight can be mounted on an optional pipe clamp light stand (pipe clamp light stand not included).
Makita 16 Gauge Shear
The Makita 16 Gauge Shear combines power and improved ergonomics for a range of metal cutting applications. The powerful 3.3 AMP motor delivers 4,000 SPM, with a minimum cutting radius of 1-3/16” for precision applications. Additional features include a lock-on switch for continuous operation, and a built-in thickness gauge for added convenience.
Makita 4-1/2 Inch 6-Amp Angle Grinder
Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life. Slide switch design with lock-on for added user convenience. Protective zig-zag varnish seals the armature from dust and debris for longer tool life. All-ball bearing design and metal gear housing for added durability. Machined bevel gears provide up to 2 times longer service life. Side handle is positioned at an increased 20 deg (degrees angle for added comfort. Two-position adjustable side handle for operator convenience. Double insulated.
- 6 Amp motor delivers 11,000 RPM
- Small diameter (2-1/4 In.) barrel grip
- Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life
- Side handle is positioned at an increased 20 degree angle for added comfort
4.5AMP LAMINATE TRIMMER
Perfect for most trimming, small edge forming, and hinge routing applications.
- A powerful motor provides the power and durability required to cut in various materials.
- Ergonomics allow for comfortable, single-handed control.
- The precision-machined, cast-aluminum fixed base provides long-term durability.
- Extra-large locking knob allows for a quick motor release and/or course depth adjustment.
- Micro-set thumbwheel enables quick and accurate bit height adjustments.
- The spindle lock button allows for single wrench bit changes.
- LED (light-emitting diode) light and clear sub-base ensure maximum visibility in operation.
DEWALT 7-1/4 Inch 15-Amp Lightweight Circular Saw
Product features: Among 1 of the lightest saws in its class at 8.8 lb. 15A motor, powerful enough for even the toughest applications. Anti-snag ball bearing lower guard provides smooth guard operation and long life in harsh environments. Tough cord provides longer durability against cord pull outs. Integrated dust blower function cleans the line of sight during cuttings. Durable high grade aluminum smooth base for accurate cuts. Clear line of sight aids in blade visibility from any angle.
- Powerful enough for even the toughest applications
- Integrated dust blower function
- Durable high grade aluminum smooth base for accurate cuts
- Tough cord
MK Morse Metal Devil 7 Inch Metal Cutting Circular Saw
The MK Morse Metal Devil 7-Inch Circular Saw is the ideal instrument for all-metal cutting such as steel, thin steel, aluminum and stainless steel. This circular saw offers a safer, cleaner way to cut metal. The special motor maintains torque at optimum RPM’s for cutting through metal smoothly and efficiently.
- 7-Inch circular saw
- Ideal instrument for all-metal cutting
- Cuts metal smoothly and efficiently
Dewalt Cordless Circular Saw Kit 20V 6 1/2″
Combining performance and versatility, the 20V MAX 6-1/2" Cordless Circular Saw is ready to take on a variety of cutting applications. It features a powerful brushless motor that delivers 4,950 rpm for fast, accurate, and consistent cutting.
- Cordless Circular Saw
- Electric brake
- Quickly adjust the bevel capacity from 0 - 50 degrees with the tool-free bevel lever
- Compatible with the DEWALT AirLock system or standard 35 mm dust extractor
- Dimensions: 15.5" x 11.56" x 8.18"
Makita 16 Gauge Nibbler
The Makita JN1601 Nibbler has a large 1/4 stroke for clean and precise work in keystone plate, deck plate and other corrugated sheet materials. The JN1601 has an ergonomic and slim body design for easy gripping, is extremely light for easy handling, and has a built-in thickness gauge for convenience.
Makita Hammer Drill with Bit Set
Makita Hammer Drill is engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life.
- Hammer Drill
- 3 Operation mode: hammering, hammering with rotation, rotation
- Speed and torque in reverse are the same as forward rotation by using brush holder unit
- Large trigger switch and lock on button
HAND TOOLS
Dewalt Screw Extractor Set
Dewalt Maxfit Ultra Screwdriving bits help maximize your Dewalt power tool system. Featuring an Anti-Snap design, Maxfit Ultra Screwdriving Bits are reengineered to deliver up to 800 more screws. Each bit features a precision-machined tip for ideal fit in screw head recesses, resulting in fewer stripped screws. The bits feature a 1/4 in. HEX Shank is designed for use with Impact Drivers and is compatible with power drills.
- Reduce bit breakage with an Anti-snap design and a redesigned Ultra Torsion Zone
- Bits feature a 1/4 in. HEX Shank
- Precision-machined tip for ideal fit in screw head recesses
Nicholson Mill Bastard File 6 Inch
The Nicholson Mill File is single cut on the sides and edges. It also features 2 square edges. All sizes of Nicholson Mill Files taper slightly in width. Does not include handle.
- American pattern half round file, bastard cut
- Precision engineered to provide maximum gram removal per stroke and amazing longevity
- 6 Inch
Channellock 1/2 In. Drive 22 mm 12-Point Shallow Metric Socket
Channellock 1/2 In. Drive Socket
- Color band denotes SAE/Metric measurement for easy identification.
- Sockets have textured bands for greater gripping power.
- 6-point versions offer more surface area making them less likely to slip off or round over corners, while 12-point versions provide more contact points making them easier to fit onto bolts.
- Chrome vanadium steel.
- 1/2 In. Drive 22 mm 12-Point Shallow.
Johnson Level 12 Inch Aluminum Rafter Square
Solid aluminum body with CNC (Computer Numerical Control) machined edges for greater accuracy and durability. Low-glare, protective powder coated finish. Permanent graduations and numbers are easy to read. A thick edge is useful as a saw guide. Scribe notches starting at 1-3/4 In. transfer outside increments from the pivot point. 12 Inch spans wider boards, simplifying layout and measurements. Complete instruction manual included with rafter tables.
- Solid aluminum body
- Low-glare, protective powder coated finish
- Instruction manual included with rafter tables
BOARD STRAIGHTENER
The new BowJak from Vaughan & Bushnell quickly takes the curves out of warped, bent, or crooked boards.
- When placed next to a bowed board, the BowJak is tapped into place on the adjacent joist, then the handle is pulled to force the board straight for final hammering.
- The operation takes only a few seconds and can close gaps between boards up to 2-1/4".
- The lightweight, 26 oz. BowJak, at 12", easily fits most tool pouches and is handily hung by its tailhook.
Channellock SpeedGrip 10 Inch Straight Jaw Groove Joint Pliers
Forged high carbon steel with precise, laser heat treated crosshatch teeth for a tight grip. Reaming feature for deburring of pipe. Blue comfort grips reduce hand fatigue. Fifteen fast and easy, non-slip adjustments.
- Precise, laser heat treated crosshatch teeth
- 15 fast and easy, non-slip adjustments
- Comfort Grip handles
- High carbon steel
Channellock Cabinet Claw Clamp 4″ 2-Pack
Elevate your cabinetry projects from complex to straightforward with the Channellock Cabinet Claw Clamps. These ingeniously designed tools allow for the rapid completion of cabinetry work, providing a seamless experience from start to finish.
- Cabinet Claw Clamp
- Enables tightening, aligning, pre-drilling, and fastening without repositioning the clamp
- Ensures precise alignment and installation of face frame stiles
- Quantity: 2 pack
- Size: 4"
Arrow T50 Heavy Duty Stainless Steel Staple 1/4 Inch 1000 Pack
This product is compatible with Arrow staple gun models HT-50A, T50, and T55. It is not suitable for marine applications. It's ideal for installing insulation, house wraps, and roofing underlayment. Additionally, it's great for upholstering fine furniture, installing window treatments, and creating crafts.
- Heavy-duty stainless steel construction
- Great for installing insulation, housewraps, and roofing underlayment
- 1/4 Inch
- 1000 Pack
Crescent Multi-Purpose Wire Cutter 10 Inch
The multi-purpose wire cutter from Crescent features ergonomic, non-slip grips that offer controlled cutting and reduce hand fatigue. Our upgraded design takes 25% lower force to cut than our prior models, allowing for quicker cutting. They will cut 2.4mm/0.09" wire in up to 46HRC.
- Optimal blade angle design allows for flush cuts and greater material access
- Ergonomic, non-slip grips enhance control and reduce hand fatigue
- Cuts 2.4mm/0.09in wire up to 46HRC
- Effortless auto-unlock latch for quick and easy use
CLEARANCE SALE!
Wrought Iron Picket (48/4) with Single Basket “Hammered”, 35-7/16 Inch (H)
These Arteferro Wrought Iron components are uniquely Italian-designed, hand crafted with finely forged details. Pickets offer a slightly different look to the vertical baskets and twists of other types of designs. This slight distinction in design has the potential to add a little more uniqueness and variety to your wrought iron staircase or railing.
Design/Style: Pickets
Selection Size: 1/2" sq.
Height: 35-7/16"
Weight: 2.6lbs
Material: Wrought Iron
Southwire 12 AWG Solid THHN Black Electrical Wire 50′
Southwire’s 12 AWG Solid Black THHN wire delivers reliable performance for a wide range of electrical applications. It's designed for durability and ease of installation. This high-quality copper conductor provides excellent conductivity and long-lasting protection in both residential and commercial wiring projects.
- Heat, moisture, gasoline, and oil-resistant nylon jacket for enhanced protection
- Ideal for conduit systems, feeders, and general building wiring
- Solid copper conductor ensures efficient current flow and dependable electrical connections
Arteferro Square Design Panel 4-17/32″W x 39-3/8″H
These Arteferro Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. This Modern Panel has a square design and features a 39-3/8" height that would truly assist with making a wrought iron project upscale. Whether it’s the decorative iron gate entry, wrought iron door, or part of the focal point as you gaze at the wrought-iron balcony the options are numerous.
- Design/Style: Square Design Panel
- Italian-designed
- Material: Wrought Iron
- Size: 4-17/32"W 39-3/8"H
Romex 12-3 Solid NMW/G Electrical Wire, Yellow 250′
Romex 12/3 Solid NMW/G Electrical Wire is designed for reliable power distribution in residential and commercial applications. It's designed with durable construction and a high-visibility yellow jacket to ensures safe, efficient installation for a wide range of interior wiring projects making it ideal for branch circuits, lighting, and outlet runs.
- High-quality 12/3 solid copper conductors for consistent performance and reduced electrical resistance
- Offers enhanced protection, visibility, and compliance with building standards
- Suitable for extensive wiring installations in homes, offices, and light commercial environments
Romex 25 Ft. 14-3 Solid White NMW/G Electrical Wire
The Romex 14-3 Solid White NMW/G Electrical Wire is designed for safe, reliable residential wiring applications. Its durable construction and grounded design make it ideal for lighting circuits, general household wiring, and other indoor electrical installations. With a 25-foot length, it offers convenient flexibility for small to medium projects while maintaining high performance and compliance with industry standards.
- 14-gauge, 3-conductor solid copper wire for dependable power distribution and long-lasting performance
- NMW/G sheathing provides added protection and includes a ground wire for enhanced electrical safety
- 25 ft. length is perfect for repairs, upgrades, and targeted indoor wiring installations
Romex 14-3 Solid NMW/G Electrical Wire, White 250′
Romex 14-3 Solid NMW/G Electrical Wire is designed for reliable residential and light commercial wiring applications. It's designed with durable PVC insulation and a grounded three-conductor. This cable delivers consistent performance for switches, outlets, and lighting circuits.
- Durable Construction
- Ideal for household branch circuits, lighting, and general wiring projects.
- Easy Identification
- Approved for service to 600 volts
- Flame-retardant and crush-resistant
Arteferro Leaf Design For 604/1 Wrought Iron Raw
These Arteferro Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. This Metal Art Leaf has a 1/8" leaf material and features a design to complement 604/1. These wrought iron leaves have always been an inexpensive way to create simplistic or even sophisticated pieces of metal art. They would make excellent choices when looking to top off a wrought iron fence or gate.
- Design/Style: Metal Leaf
- Italian-designed
- Material: Wrought Iron
- Size: 1/8"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Romex 100 Ft. 12-3 Solid Yellow NMW/G Electrical Wire
The Romex 100 Ft. 12/3 Solid Yellow NMW/G Electrical Wire is a high-quality, durable cable designed for residential and commercial wiring applications. Ideal for indoor use, this wire provides reliable power distribution to outlets, lighting, and appliances while meeting stringent safety and performance standards.
- High performance
- Safety compliant
- Versatile use
Arteferro Sphere Hot Stamped 3-1/8 Inch
These Arteferro Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. Spheres make the perfect finishing touch to wrought iron railing projects. These wrought iron components compliment any traditional or modern commercial or home design weather.
- Italian-designed
- Designed to be combined with many other Arteferro components
- Raw wrought iron finish allows you to choose the finish that’s perfect for your project
- Design/Style: Spheres
- Diameter: 3-1/8″
- Material: Wrought Iron
Bussmann 20A BP/SL Time-Delay Plug Fuse (3-Pack)
Bussmann 20A BP/SL Time-Delay Plug Fuse id designed for residential and light-duty applications, this fuse provides dependable overload protection while allowing temporary power surges from motors and appliances without unnecessary interruptions.
Time-delay design prevents nuisance blowing from temporary surges
• Rated at 20 amps for safe use in standard household circuits
• Convenient 3-pack for easy replacement and long-term use
• Rated at 20 amps for safe use in standard household circuits
• Convenient 3-pack for easy replacement and long-term use
Wrought Iron Rosette (24/B/1), 18-1/8 Inch (D)
These Arteferro Wrought Iron components are uniquely Italian-designed, hand crafted with finely forged details. Iron rosettes are a perfect complement to iron railings, old door, wall partitions, metal furniture, iron gates etc.
Design/Style: Rosette
Selection Size: 1/2" X 1/4"
Diameter: 18-1/8"
Weight: 4.4lbs
Material: Wrought Iron
Romex 12-2 Solid Yellow NMW/G Electrical Wire, 250′
This reliable roll of Romex 12-2 Solid Yellow NMW/G Electrical Wire is designed for durability and easy installation. It delivers consistent performance for interior branch circuits and general household wiring making it ideal for both renovations and new construction. This trusted cable ensures safe, efficient power distribution throughout your home.
- Safe for interior dry locations, featuring a durable PVC jacket for added protection
- Perfect for larger projects, offering flexibility and reduced need for splicing
- Approved for service to 600 volts
- Flame-retardant and crush-resistant
Wrought Iron Panel (540/2) with S-Scroll, 9-7/8 Inch (W) X 28-3/8 Inch (H)
These Arteferro Wrought Iron components are uniquely Italian-designed, hand crafted with finely forged details. The Panels collection from Arteferro truly assist with making a wrought iron project an upscale. Whether it's the decorative iron gate entry, wrought iron door, or part of the focal point as you gaze to the wrought iron balcony the options are numerous.
Design/Style: Panels
Selection Size: 1/2" dia.
Width: 9-7/8"
Height: 28-3/8"
Weight: 5.0lbs
Material: Wrought Iron
Romex 14-3 Solid NMW/G Electrical Wire, White 100′
Romex 14-3 Solid NMW/G Electrical Wire is a reliable, high-quality wiring solution designed for residential and light commercial applications. Its durable non-metallic sheath provides excellent protection, while the solid copper conductors ensure consistent, dependable performance for household circuits. Ideal for lighting, outlets, and general electrical installations.
- White non-metallic sheath offers strong insulation and easy identification during installation.
- High-Quality Solid Copper Conductors
- Suitable for a wide range of indoor wiring projects, providing ample reach and flexibility.
- Approved for service to 600 volts
- Flame-retardant and crush-resistant
Wrought Iron Spear Point (124/3) Stamped Base, 4-7/8 Inch (H)
These Arteferro Wrought Iron components are uniquely Italian-designed, hand crafted with finely forged details. Arteferro's flowers and ornaments are the perfect complement to wrought iron railings, wrought iron garden art or metal home accessories. Select from things like forged grapes, leaves, stamped leaves, or flowers to create a natural, wrought iron charm.
Design/Style: Spear Point Stamped Base
Selection Size: 1/2" dia.
Height: 4-7/8"
Weight: 0.3lbs
Material: Wrought Iron
Romex 14-2 Solid White NMW/G Electrical Wire, 250′
The Romex 14-2 Solid NMW/G Electrical Wire is a reliable, high-quality residential wiring solution designed for indoor branch circuits. It features durable non-metallic sheathing, solid copper conductors and delivers consistent performance for lighting, outlets, and other general-purpose applications. Ideal for contractors, electricians, and DIY home projects.
- Durable NM-B sheathing for safe, long-lasting indoor electrical installations
- 14-gauge solid copper conductors ensure stable conductivity and dependable performance
- 250 ft length provides excellent value and flexibility for small to medium wiring projects
- Approved for service to 600 volts.
- Flame retardant and crush-resistant
Arteferro Stamped Raw Leaf 3/16 Inch
These Arteferro Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. Stamped wrought iron leaves have always been an inexpensive way to create simplistic or even sophisticated pieces of metal art. They would make excellent choices when looking to top off a wrought iron fence or gate.
- Design/Style: Stamped Raw Leaf
- Italian-designed
- Material: Wrought Iron
- Size: 4-15/16" x 3-9/16" x 3/16"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Amanco Gutter Downpipe Rectangle
Used to facilitate the collection of rain water from rooftop, this gutter downpipe controls the direction of water away from a building. Constructed from PVC material for durability and corrosion resistance, it easy to install and protects a building's walls, foundation, window frames and people.
- Controls the flow of rain water
- Durable
- Corrosion resistant
- Easy to install
- Protects walls, foundation, window frames and people
Arteferro S-Scroll With Grape 14-1/2 x 35-7/16 Inch
These Arteferro S-Scroll Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. This Ornate Panel has decorative grapes and flowers and features a 35-7/16" height. They are a perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates etc.
- Design/Style: S-Scroll With Grapes
- Italian-designed
- Material: Wrought Iron
- Size: 14-1/2" x 35-7/16"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Coleman Cable 500 Ft. 16-2 Stranded Speaker Wire
The Coleman Cable 500 Ft. 16-2 Stranded Speaker Wire is designed for high-quality audio transmission, this durable and flexible wire is ideal for home theaters, sound systems, and commercial installations. Its stranded copper conductors ensure clear, consistent sound while minimizing signal loss over long.
- Stranded copper conductors provide clear, accurate sound with minimal interference
- Easy to install around corners and through walls without compromising performance
- 500 ft. spool offers ample wire for large installations or multiple speaker setups
Southwire 14 AWG Solid THHN Green Electrical Wire 50′
This high-quality Southwire THHN wire is designed for reliable performance in a wide range of electrical installations. Its durable thermoplastic insulation and vibrant green color coding makes it ideal for grounding applications while ensuring long-lasting protection and easy identification. Perfect for residential, commercial, and industrial use.
- 14 AWG solid copper conductor for dependable conductivity and stable electrical performance.
- Heat-, moisture-, and abrasion-resistant THHN insulation for safe, long-lasting durability in various environments.
- Green color-coded jacket for clear identification in grounding and bonding applications.
Wrought Iron Leaf Stamped (136/2) Left Hand, 1-9/16 Inch (W) X 4-5/16 Inch (H)
These Arteferro Wrought Iron components are uniquely Italian-designed, hand crafted with finely forged details. Arteferro's flowers and ornaments are the perfect complement to wrought iron railings, wrought iron garden art or metal home accessories. Select from things like forged grapes, leaves, stamped leaves, or flowers to create a natural, wrought iron charm.
Design/Style: Flowers and Ornaments
Selection Size: 1/8"
Width: 1-9/16"
Height: 4-5/16"
Weight: 0.2 lbs
Material: Wrought Iron
Arteferro C-Scroll With End Leaves, (13-3/4″ x 9-1/16″ x 1/2″)
These Arteferro C-Scroll Forged With Leaves Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. This Ornate Scroll has a 13 3/4" height and features a 9 1/16" width. They are a perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates etc.
- Design/Style: C-Scroll With End Leaves
- Italian-designed
- Material: Wrought Iron
- Size: 13-3/4" x 9-1/16" x 1/2"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
