POWER TOOLS
2PK 18V LXT 5AH BATTERY
Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications.
- Battery resists self-discharge and remains ready for use even after long periods of storage.
- Delivers consistent power and run time in extreme temperatures (-4 F/-20 C).
Makita Lithium-Ion Drill Impact Kit
Cordless drill/driver with 2 speeds, 0-600 and 0-1900 rpm (revolutions per minute), delivers up to 480 In./Lb. (inches per pound) of max torque. Ergonomically designed handles with rubberized soft grips provide increased comfort.
- Drill Impact Kit
- Includes (1) 18V LXT 1/2 In. drill/driver, (1) 18V LXT impact driver , (1) 18V LXT lithium-ion charger , (2) 18V 1.5 Ah lithium-ion batteries, and (1) tool bag.
- Cordless
Westinghouse Cordless Impact Drill
This Cordless Impact drill combines innovation and efficiency to provide users with a superior drilling and fastening experience. It is a specialized type designed for driving screws and bolts with increased torque and efficiency.
- Cordless Drill
- With keyless metal chuck
- Torque control
- 2 Speed gearbox
- LED light control
Makita 18 Volt LXT Lithium-Ion Corded/Cordless Work Light (Bare Tool)
The 18V LXT lithium-ion corded/cordless LED (light-emitting diode) floodlight (DML805) offers the convenience of corded or cordless operation, and provides bright and even lighting for large workspaces without the high heat of halogens.
- At full brightness, it provides 750 lumens of light and 450 lumens on low mode.
- Adjusting knobs enable the user to direct the floodlight to the desired angle.
- The fast-charging 18V LXT lithium-ion 4.0 Ah battery (sold separately) delivers 10.5 hours of continuous illumination on a single charge.
- AC (alternating current) cord is easily stored and wrapped around the mounting stand base.
- An integrated handle can be used as a hanging hook for user convenience.
- Light will flash to alert the user when the battery charge is low.
- Compact at only 8-3/8 In. long.
- Worklight can be mounted on optional tripod light stand individually or with two floodlights (tripod light stand not included).
- Worklight can be mounted on an optional pipe clamp light stand (pipe clamp light stand not included).
Dewalt 20V Brushless Chainsaw
Dewalt 20V Brushless Chainsaw is designed for efficiency and durability. This lightweight tool delivers the cutting power you need for yard work, construction, and maintenance tasks without the hassle of gas.
- Maximizes runtime and motor life for consistent, powerful cuts
- Easy to maneuver and reduces user fatigue during extended use
- Quick and simple adjustments ensure optimal cutting performance on the go
Dewalt Powerstack 20 Volt MAX Lithium-Ion 5 Ah Tool Battery & Charger Kit
The Dewalt PowerStack 5.0 Ah 20V MAX battery is our most powerful battery in its class. The 20V MAX Dewalt PowerStack 5.0Ah Battery utilizes revolutionary pouch cell technology to deliver 50% more power, 50% more work per charge, and 2X the lifespan. Compatible with all DEWALT 20V MAX* tools and chargers, the DEWALT POWERSTACK 5.0 Ah Battery features an impact-resistant, rubber overmolded base and includes 3-LED Fuel Gauge state of charge indicator.
- Packed with Power Get 50% more power to tackle tough jobs
- More Efficient Battery is 50% more efficient making it DEWALTs most efficient battery in its class+++.
- Durable Design: The non-marring over-molded rubber base also helps to protect finished surfaces
- Long-lasting: 2X lifespan** provides more overall investment value
- At-a-Glace Charge Status: Quickly check state-of-charge with 3-LED fuel gauge
- Compatibility with all DEWALT20V MAX* tools & chargers
Genesis 20V Lithium-Ion 1.5 Ah Tool Battery
20V Lithium-ion replacement battery is the replacement battery pack for Genesis 20-Volt cordless drill and Genesis 20-Volt cordless impact driver. Fits all tools in the Genesis 20-Volt Lithium-Ion power tool lineup. The battery can hold its charge for over 18 months in storage.
- Keep a backup battery on hand to ensure no down time due to charging
- Replacement battery pack for Genesis 20-Volt cordless tools
- High capacity 1.5Ah battery
Black and Decker GoPAK Cordless Drill 4-Tool Combo Kit
Give style and innovation to your home with this incredible combo kit, a model that offers you all the remodeling alternatives, so that you can carry out your project in a unique and great way. It includes: cordless drill/driver, jigsaw, sander and LED flash light to illuminate your workspace.
- 4-Tool Combo Kit
- Contains: Drill, Jig Saw , sander, work light
- Battery powered
- Voltage: 12
- Colour: Black
Makita 2-Tool 18V LXT Lithium-Ion Brushless Hammer Drill/Driver & Impact Driver Cordless Tool Combo Kit
The 18V LXT Lithium-Ion Cordless 2-Piece Combo Kit packs two compact cordless tools with efficient brushless motors for a full range of drilling, driving, and fastening applications. The XT269M includes a versatile hammer driver-drill with all-metal gear construction for applications in wood, metal and masonry. Hammer driver-drill features Extreme Protection Technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions. Includes (1) 18V LXT compact brushless 1/2 In. hammer drill/driver (XPH12Z), (1) 18V LXT brushless impact driver (XDT13Z), (2) 18V LXT lithium-ion 4.0 Ah batteries (BL1840B), (1) 18V LXT lithium-ion rapid optimum charger (DC18RC) and (1) tool bag.
- Variable 2-speed 1/2 In. Hammer Driver-Drill (0-500 & 0-2,000 RPM) with brushless motor delivers 530 In./Lb. of max torque
- Variable speed Impact Driver (0-3,400 RPM & 0-3,600 IPM) with brushless motor delivers 1,500 In./Lb. of max torque
- For a full range of drilling, driving, and fastening applications
Dewalt Powerstack 20V MAX Lithium-Ion 5.0 Ah Tool Battery
The Dewalt Powerstack 20V MAX Compact Battery is 50% more powerful, 25% more compact, and 15% lighter. This battery features an impact-resistant, rubber overmold base and utilizes revolutionary pouch cell battery technology to provide twice the lifetime. Engineered to get into tight spaces without sacrificing performance, our most powerful, most compact, and lightweight battery is compatible with the 20V MAX tools and chargers you already own.
- Durable, overmolded base provides impact resistance
- Battery provides 2X lifetime
- LED fuel gauge displays state-of-charge
- Battery works with all DEWALT 20V MAX tools and chargers
Makita Cordless Screwdriver
This Makita Cordless Screwdriver is made using high quality materials that make it sturdy and long lasting. It drives screws at a much faster rate and without any hassle. This kit is ideal for professionals and also for home use.
- Cordless Screwdriver
- Convertible: straight form or pistol form
- Handle is adjustable from 0 to 60 degrees
- LED light works via a separate switch on top
- 80pc bit set
Genesis 20V 2-Tool Lithium-Ion Drill/Driver & Impact Driver Cordless Tool
Compact, lightweight and powerful. The 20-Volt Lithium-Ion Drill Driver delivers 350 In./Lb. of torque power. Its high-speed transmission delivers 2 speeds (0-350 RPM and 0-1300 RPM) to ensure power and speed. 20-Volt Lithium-Ion Impact Driver delivers an incredible 1062 In./Lb. of torque power. The high-power variable speed transmission delivers 0-2200 RPM and 0-3800 IPM (impacts per minute). Both tools have ergonomic handles with rubber inserts. Both include built-in LED work lights, onboard battery power indicators and electric brakes. Combo Kit includes: (2) 20-Volt compact Lithium-ion 1.5Ah battery packs, compact charger, high-quality contractor's bag, and #2 Phillips power screwdriver bit.
- Compact, lightweight and powerful
- Built-in LED Work Light
- On-Board battery power indicator
- Electric Brake
Genesis 20V 1/2 Inch Cordless Drill/Driver Kit
The Genesis GLD2012B Cordless Drill is Fully Featured and Designed to Take on the Most Demanding Projects. The 1/2" Single Sleeve All-Metal Ratcheting Chuck Securely Holds Bits. The High-Performance Motor Produces up to 450 in-lb of Torque, and the 2-Speed Gear Box Provides the Power and Speed to Match your Task. An LED Fuel Gauge Indicates the Remaining Charge.
- Compact, Lightweight, and Powerful
- Battery Holds its Charge up to 18 Months in Storage
- High-Performance Motor Produces up to 350 in-lbs of Torque
- Two Variable Speed Ranges for Versatility
- Built-In LED Work Light
- 21+1 Torque/Clutch Settings
- Electric Brake
Milwaukee M18 REDLITHUM High Output XC8.0 Tool Battery
The Milwaukee M18 REDLITHIUM High Output XC8.0 Battery Pack provides 50% more power and runs 50% cooler vs. M18 REDLITHIUM XC battery packs. The optimized combination of smaller size and increased power of the 18V battery provides a great solution for the entire range of M18 products. The lithium-ion battery delivers fade-free power and runs substantially cooler through heavy applications, allowing trade professionals to push their cordless tools throughout a wide application range.
- M18 REDLITHIUM Hgh Output XC8.0 Battery Pack
- Delivers fade-free power and runs substantially cooler through heavy applications
- Provides increased power in extreme-cold weather conditions below 0 F
- Fully compatible with all M18 solutions
Dewalt 20V Max Brushless Pruning Chainsaw, 8″
The Dewalt 20V Max Brushless Pruning Chainsaw. is engineered for efficiency and ease of use. with it being lightweight and cordless, this chainsaw delivers high cutting performance making it ideal for branches, shrubs, and small trees. The included 3.0 Ah battery and charger ensure reliable, extended runtime for professional or home use.
- Powerful Brushless Motor
- Compact & Lightweight Design
- Includes 20V Max 3.0 Ah lithium-ion battery and charger ready to use right out of the box
M12-M18 RAPID CHARGER
The M18 and M12 rapid charge station is the fastest charging solution in the industry. With the ability to charge six-packs four times faster, the station charges three batteries simultaneously while charging each pack up to 40% faster.
- The charger accepts up to (3) M18 and (3) M12 battery packs, reducing the amount of time spent changing out batteries and increasing productivity on the job site.
- Featuring REDLINK Intelligence, it communicates directly with the battery to monitor cell voltage, temperature, and charge status to optimize the performance and extend the life of the pack.
- The station has integrated hang holes for vertical mounting, a pass-through plug to conserve outlet space, and a convenient carry handle to transport packs on and off the job site.
20V Max Lithium-Ion Drill & Reciprocating Saw Cordless Tool Combo Kit
This PORTER-CABLE combo kit comes with a 20V MAX* compact battery that operates both the Drill/Driver and Reciprocating Saw. The drill/driver features a high-performance motor that delivers the power needed to tackle tough jobs.
- Compact and lightweight to fit into tight spaces
- High-performance motor and 2-speed gear box to deliver the power needed
- Tool-free blade release for quick changes
- Its variable-speed trigger and pivoting shoe give you ultimate control
- Contoured over-molded handle for more comfort
- Includes (1) 20V MAX lithium-ion battery, charger, carry bag
- Model No. PCC601LB
Dewalt Cordless Circular Saw Kit 20V 6 1/2″
Combining performance and versatility, the 20V MAX 6-1/2" Cordless Circular Saw is ready to take on a variety of cutting applications. It features a powerful brushless motor that delivers 4,950 rpm for fast, accurate, and consistent cutting.
- Cordless Circular Saw
- Electric brake
- Quickly adjust the bevel capacity from 0 - 50 degrees with the tool-free bevel lever
- Compatible with the DEWALT AirLock system or standard 35 mm dust extractor
- Dimensions: 15.5" x 11.56" x 8.18"
DEWALT 7-1/4 Inch 15-Amp Lightweight Circular Saw
Product features: Among 1 of the lightest saws in its class at 8.8 lb. 15A motor, powerful enough for even the toughest applications. Anti-snag ball bearing lower guard provides smooth guard operation and long life in harsh environments. Tough cord provides longer durability against cord pull outs. Integrated dust blower function cleans the line of sight during cuttings. Durable high grade aluminum smooth base for accurate cuts. Clear line of sight aids in blade visibility from any angle.
- Powerful enough for even the toughest applications
- Integrated dust blower function
- Durable high grade aluminum smooth base for accurate cuts
- Tough cord
MK Morse Metal Devil 7 Inch Metal Cutting Circular Saw
The MK Morse Metal Devil 7-Inch Circular Saw is the ideal instrument for all-metal cutting such as steel, thin steel, aluminum and stainless steel. This circular saw offers a safer, cleaner way to cut metal. The special motor maintains torque at optimum RPM’s for cutting through metal smoothly and efficiently.
- 7-Inch circular saw
- Ideal instrument for all-metal cutting
- Cuts metal smoothly and efficiently
Makita Hammer Drill with Bit Set
Makita Hammer Drill is engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life.
- Hammer Drill
- 3 Operation mode: hammering, hammering with rotation, rotation
- Speed and torque in reverse are the same as forward rotation by using brush holder unit
- Large trigger switch and lock on button
Makita 4-1/2 Inch 6-Amp Angle Grinder
Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life. Slide switch design with lock-on for added user convenience. Protective zig-zag varnish seals the armature from dust and debris for longer tool life. All-ball bearing design and metal gear housing for added durability. Machined bevel gears provide up to 2 times longer service life. Side handle is positioned at an increased 20 deg (degrees angle for added comfort. Two-position adjustable side handle for operator convenience. Double insulated.
- 6 Amp motor delivers 11,000 RPM
- Small diameter (2-1/4 In.) barrel grip
- Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life
- Side handle is positioned at an increased 20 degree angle for added comfort
Makita 16 Gauge Nibbler
The Makita JN1601 Nibbler has a large 1/4 stroke for clean and precise work in keystone plate, deck plate and other corrugated sheet materials. The JN1601 has an ergonomic and slim body design for easy gripping, is extremely light for easy handling, and has a built-in thickness gauge for convenience.
4.5AMP LAMINATE TRIMMER
Perfect for most trimming, small edge forming, and hinge routing applications.
- A powerful motor provides the power and durability required to cut in various materials.
- Ergonomics allow for comfortable, single-handed control.
- The precision-machined, cast-aluminum fixed base provides long-term durability.
- Extra-large locking knob allows for a quick motor release and/or course depth adjustment.
- Micro-set thumbwheel enables quick and accurate bit height adjustments.
- The spindle lock button allows for single wrench bit changes.
- LED (light-emitting diode) light and clear sub-base ensure maximum visibility in operation.
Makita 16 Gauge Shear
The Makita 16 Gauge Shear combines power and improved ergonomics for a range of metal cutting applications. The powerful 3.3 AMP motor delivers 4,000 SPM, with a minimum cutting radius of 1-3/16” for precision applications. Additional features include a lock-on switch for continuous operation, and a built-in thickness gauge for added convenience.
HAND TOOLS
Channellock 1/2 In. Drive 23 mm 12-Point Shallow Metric Socket
Channellock 1/2 In. Drive Socket
- Color band denotes SAE/Metric measurement for easy identification.
- Sockets have textured bands for greater gripping power.
- 6-point versions offer more surface area making them less likely to slip off or round over corners, while 12-point versions provide more contact points making them easier to fit onto bolts.
- Chrome vanadium steel.
- 1/2 In. Drive 23 mm 12-Point Shallow.
Hyde Joint Knife, 4″
The Hyde 4" Joint Knife is a durable, professional-grade tool designed for smooth drywall finishing, patching, and taping. Its high-quality construction ensures precision and long-lasting performance on every job.
- Flexible stainless steel blade for even compound application
- Comfortable solvent-resistant handle for superior grip and control
- Ideal for drywall, plaster, and general-purpose surface work
Channellock 1/2 In. Drive 16 mm 12-Point Shallow Metric Socket
Channellock 1/2 In. Drive Socket
- Color band denotes SAE/Metric measurement for easy identification.
- Sockets have textured bands for greater gripping power.
- 6-point versions offer more surface area making them less likely to slip off or round over corners, while 12-point versions provide more contact points making them easier to fit onto bolts.
- Chrome vanadium steel.
- 1/2 In. Drive 16 mm 12-Point Shallow.
Black & Decker 20 Volt MAX Lithium-Ion Cordless Drill/Driver & 63-Piece Hand Tool & Accessory Home Project Kit
20V MAX lithium-ion drill/driver with a 63-piece hand tool and accessory home project kit. This kit is the perfect solution for homeowners to take on decorating, assembling, repairing, and installation projects around the house. The kit comes packaged in a translucent toolbox to provide visibility, portability and storage. A modular tool tray helps provide organization for each tool. Includes: 20V MAX lithium-ion drill driver, 20V MAX 2.0 Ah battery, charger, 32 fastening bits, 12 hex keys, 10 drilling bits, utility knife, tape measure, needle nose pliers, slip joint pliers, level, hammer, and picture hanging hardware kit.
- 64-piece kit for basic home decorating, assembling, fixing and installation needs
- Translucent toolbox provides portability & storage
- Modular tool tray helps provide organization for each tool
- 20V Lithium-Ion battery holds charge up to 18 months
Channellock 3/8 In. Drive 11 mm 12-Point Shallow Metric Socket
Channellock 3/8 In. Drive Socket
Color band denotes SAE/Metric measurement for easy identification. Sockets have textured band for greater gripping power.
6-point versions offer more surface area making them less likely to slip off or round over corners, while 12-point versions provide more contact points making them easier to fit onto bolts. Chrome vanadium steel.
Channellock Cabinet Claw Clamp 4″ 2-Pack
Elevate your cabinetry projects from complex to straightforward with the Channellock Cabinet Claw Clamps. These ingeniously designed tools allow for the rapid completion of cabinetry work, providing a seamless experience from start to finish.
- Cabinet Claw Clamp
- Enables tightening, aligning, pre-drilling, and fastening without repositioning the clamp
- Ensures precise alignment and installation of face frame stiles
- Quantity: 2 pack
- Size: 4"
Milwaukee Packout 25 Lb Tool Tray Tote
The MILWAUKEE PACKOUT Tool Tray features Stack or Store functionality. Stack the Tool Tray onto any PACKOUT solution, or store within the PACKOUT Rolling Tool Chest (48-22-8428), Rolling Tool Box (48-22-8426), XL Tool Box (48-22-8429), or the Large Tool Box (48-22-8425). This tool storage tray allows customization of its internal layout with Quick-Adjust Dividers creating up to six separate storage compartments. A 25 Lb. weight capacity and the metal reinforced handle enable easy transportation of tools and materials around. Milwaukee PACKOUT is the industry's most durable and versatile storage system. Includes (1) long divider and (4) small dividers.
- Store or stack
- Quick-adjust dividers
- 25 Lb. capacity
- Impact resistant body
- Metal reinforced handle
- Arrange dividers to create up to (6) compartments
- Includes (1) long divider and (4) small dividers
Hilco Red Extra 6013 Welding Rod (350mm) – 4 Packs Per Cartoon
Red extra 6013 welding rod is a high titanic coated electrode. This electrode was primarily designed to provide good wetting and shallow penetration for thin sheet metal applications but with sufficient penetration for welding medium gauge steel. Available in various guages.
Brand: Hilco
Size: 350mm
20KG per cartoon.
4 pack per cartoon.
Guage: 14G
Steelman Yoke Vise 2 Inch
The Steelman Yoke Vise is engineered to offer robust and reliable performance for heavy-duty pipe applications. It features a three-piece hardened steel V-Jaw design that secures pipes firmly during work. Constructed from durable cast iron with precision-machined threads, this vise is built to withstand rigorous use.
- Three piece hardened steel V-Jaw design provides secure grip on pipe
- Durable cast iron construction
- Built-in pipe support keeps pipe level while clamping
- Clamp lock for added safety
Total Spirit Level 60 Inch
Total Spirit Level 60 Inch has built-in spirit vials with a finely milled bottom surface, suitable for use in leveling vertical or horizontal surfaces. The level features a V-shape slot for measuring cylinder objects, double side milled, 0.5mm/m accurate vials and aluminum thickness:1.5mm.
- V-shape slot for measuring cylinder objects
- Double side milled
- 0.5mm/m accurate vials
- Aluminum thickness:1.5mm
BRAD/NAIL DRIVER
The GreatNeck Magnetic Brad and Nail Driver gets the job done without marring surfaces. This Driver is ideal for working in tight corners and hard to reach spaces. The magnetic head holds the nail firm while downward pressure on an ergonomic solid wood handle easily inserts the nail. The driver is chrome plated to resist rust.
Gardner Bender 3-Prong Plug In Circuit Tester
Receptacle tester and circuit analyzer. Detects faulty wiring in any standard 110/125V AC grounded receptacle. Tests 6 circuit conditions; open neutral, open ground, open hot, hot/ground reverse, hot/neutral reverse, and correct.
- Easy-to-read signal indicators.
- Plug in and watch the yellow and red lights identify the wiring condition.
- Yellow.
- UL (Underwriter's Laboratories) listed.
CLEARANCE SALE!
Arteferro Leaf Forged, 3/16 “
These Arteferro Leaf Forged Wrought Iron Raw components are uniquely Italian-designed, handcrafted with finely forged details. This Metal Art Leaf has a leaf design and features a 6-5/16" height. They are a perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates etc.
- Design/Style: Leaf Forged Wrought Iron
- Italian-designed
- Material: Wrought Iron
- Size: 3/16"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Arteferro Raw Leaf Stamped Right Hand 1-9/16 x 4-5/16 Inch
These Arteferro Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. Stamped wrought iron leaves have always been an inexpensive way to create simplistic or even sophisticated pieces of metal art. They would make excellent choices when looking to top off a wrought iron fence or gate.
- Design/Style: Raw Leaf Stamped Right Hand
- Italian-designed
- Material: Wrought Iron
- Size: 1-9/16" x 4-5/16"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Wrought Iron Picket (48/3) with Double Basket “Hammered”, 35-7/16 Inch (H)
These Arteferro Wrought Iron components are uniquely Italian-designed, hand crafted with finely forged details. Pickets offer a slightly different look to the vertical baskets and twists of other types of designs. This slight distinction in design has the potential to add a little more uniqueness and variety to your wrought iron staircase or railing.
Design/Style: Pickets
Selection Size: 1/2" sq.
Height: 35-7/16"
Weight: 2.6lbs
Material: Wrought Iron
Wrought Iron Rosette (33/1), 9-13/16 Inch (D)
These Arteferro Wrought Iron components are uniquely Italian-designed, hand crafted with finely forged details. Iron rosettes are a perfect complement to iron railings, old door, wall partitions, metal furniture, iron gates etc.
Design/Style: Rosette
Selection Size: 15/32" X 1/4"
Diameter: 9-13/16"
Weight: 2.4lbs
Material: Wrought Iron
Arteferro Forged Left Hand Leaf, (7-7/8″ x 5-7/8″ x 1/2″)
These Arteferro Forged Left Hand Leaf Wrought Iron Raw components are uniquely Italian-designed, handcrafted with finely forged details. This Metal Art Leaf has a leaf design and features a 7-7/8" height. They are a perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates etc.
- Design/Style: Forged Left Hand Leaf
- Italian-designed
- Material: Wrought Iron
- Size: 7-7/8" x 5-7/8" x 1/2"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Bussmann 15A BP/TL Time-Delay Plug Fuse (3-Pack)
Bussmann 15A BP/TL Time-Delay Plug Fuse is designed to provide reliable overcurrent protection for residential circuits. Featuring a time-delay design, it allows harmless temporary surges while protecting circuits from sustained overloads. Ideal for use in older fuse panel installations, this 3-pack ensures consistent and safe electrical performance.
- Time-delay design prevents nuisance blowing during momentary surges
- Provides dependable circuit protection up to 15 amps
- Compatible with standard Edison-base fuse holders for easy installation
Arteferro Forged Leaf Design Wrougth Iron Raw, (8-5/8″ x 4-1/2″ x 5/32″)
These Arteferro Forged Leaf Design Wrought Iron Raw components are uniquely Italian-designed, handcrafted with finely forged details. This Metal Art Leaf has a leaf design and features a 4 1/2" width. They are a perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates etc.
- Design/Style: Forged Leaf Design
- Italian-designed
- Material: Wrought Iron
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Romex 14-3 Solid NMW/G Electrical Wire, White 250′
Romex 14-3 Solid NMW/G Electrical Wire is designed for reliable residential and light commercial wiring applications. It's designed with durable PVC insulation and a grounded three-conductor. This cable delivers consistent performance for switches, outlets, and lighting circuits.
- Durable Construction
- Ideal for household branch circuits, lighting, and general wiring projects.
- Easy Identification
- Approved for service to 600 volts
- Flame-retardant and crush-resistant
Coleman Cable 250 Ft. 18/5 Thermostat Wire
The Coleman Cable 18/5 Thermostat Wire is a high-quality, durable solution designed for reliable low-voltage connections in heating and cooling systems. Its flexible construction and premium insulation ensure consistent performance for both residential and commercial applications.
- 18 AWG, 5-conductor stranded copper wire ensures dependable conductivity and flexibility
- Ideal for thermostat controls, HVAC systems, doorbells, and other low-voltage applications
- PVC outer insulation resists wear, moisture, and sunlight for long-lasting indoor or outdoor use
Wrought Iron Rosette (1017/3), 18-21/32 Inch (D)
These Arteferro Wrought Iron components are uniquely Italian-designed, hand crafted with finely forged details. Iron rosettes are a perfect complement to iron railings, old door, wall partitions, metal furniture, iron gates etc.
Design/Style: Rosette
Selection Size: 1/2"
Diameter: 18-21/32"
Weight: 3.32lbs
Material: Wrought Iron
Arteferro Raw Metal Stamped Leaf 2-33/64 x 7-7/8 Inch
These Arteferro Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. Stamped wrought iron leaves have always been an inexpensive way to create simplistic or even sophisticated pieces of metal art. They would make excellent choices when looking to top off a wrought iron fence or gate.
- Design/Style: Raw Metal Stamped Leaf
- Italian-designed
- Material: Wrought Iron
- Size: 2-33/64" x 7-7/8"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Wrought Iron Flower (1406/3), 5-1/2 Inch (D)
These Arteferro Wrought Iron components are uniquely Italian-designed, hand crafted with finely forged details. Arteferro's flowers and ornaments are also the perfect complement to wrought iron railings, wrought iron garden art or metal home accessories. Select from things like forged grapes, leaves, stamped leaves, or flowers to create a natural, wrought iron charm.
Design/Style: Flowers and Ornaments
Selection Size: 1-9/16"
Diameter: 5-1/2"
Weight: 0.15 lbs
Material: Wrought Iron
Romex 10-3 Solid NMW/G Electrical Wire, Orange 250′
Romex 10-3 Solid NMW/G Electrical Wire is engineered for reliable residential and light-commercial wiring applications. It's designed with durable construction and a generous 250 ft length, this cable provides consistent performance for branch circuits, indoor wiring, and general electrical installations. Its color-coded orange jacket ensures quick identification and compliance with standard wiring practices.
- High-quality 10-gauge solid copper conductors
- NMW/G rated jacket designed for dry, protected indoor locations
- Approved for service to 600 volts
- Flame-retardant and crush-resistant
Coleman Cable 500 Ft. 16-2 Stranded Speaker Wire
The Coleman Cable 500 Ft. 16-2 Stranded Speaker Wire is designed for high-quality audio transmission, this durable and flexible wire is ideal for home theaters, sound systems, and commercial installations. Its stranded copper conductors ensure clear, consistent sound while minimizing signal loss over long.
- Stranded copper conductors provide clear, accurate sound with minimal interference
- Easy to install around corners and through walls without compromising performance
- 500 ft. spool offers ample wire for large installations or multiple speaker setups
Arteferro Leaf Design For 604/1 Wrought Iron Raw
These Arteferro Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. This Metal Art Leaf has a 1/8" leaf material and features a design to complement 604/1. These wrought iron leaves have always been an inexpensive way to create simplistic or even sophisticated pieces of metal art. They would make excellent choices when looking to top off a wrought iron fence or gate.
- Design/Style: Metal Leaf
- Italian-designed
- Material: Wrought Iron
- Size: 1/8"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Wrought Iron Picket (48/4) with Single Basket “Hammered”, 35-7/16 Inch (H)
These Arteferro Wrought Iron components are uniquely Italian-designed, hand crafted with finely forged details. Pickets offer a slightly different look to the vertical baskets and twists of other types of designs. This slight distinction in design has the potential to add a little more uniqueness and variety to your wrought iron staircase or railing.
Design/Style: Pickets
Selection Size: 1/2" sq.
Height: 35-7/16"
Weight: 2.6lbs
Material: Wrought Iron
Amanco Gutter Rectangle Collar
The Amanco Gutter Rectangle Collar is used to create longer downspout assemblies by connecting 2 or more 10 Ft. downspout sections. Featuring a white finish and standard rectangular, corrugated design, this durable, vinyl downspout connector fits 2 in. x 3 in. rectangular downspouts. Easy to install, this downspout connector does not require painting.
- Gutter Rectangle Collar
- Crush-and dent-proof vinyl construction
- White color matches many home exterior
- Downspout connector fits 2 in. x 3 in. rectangular downspouts
Bussmann 30A FRN-R Cartridge Heavy-Duty Time Delay Cartridge Fuse (2-Pack)
Bussmann 30A FRN-R Heavy-Duty Time Delay Cartridge Fuse delivers reliable overload and short-circuit protection for a wide range of industrial and commercial applications. It's designed for long-lasting performance, these fuses ensure consistent operation in motor circuits and other high inrush current systems.
- Heavy-duty time-delay design allows for temporary overloads without unnecessary fuse blows
- Rated at 30 amps for dependable protection in demanding electrical systems
- UL Listed and CSA Certified for proven safety and performance standards
Southwire 14 AWG 3-Conductor UFW/G Electrical Wire, 50′
The Southwire 14 AWG 3-Conductor UFW/G Electrical Wire delivers reliable performance for residential and light commercial wiring projects. It's designed for durability and safety, provides consistent conductivity and is ideal for indoor branch circuits, lighting, and general wiring applications. Its 50-foot length offers flexibility and convenience for a wide range of installations.
- High-quality copper conductors for stable, long-lasting electrical performance
- Includes grounding wire and meets industry standards for indoor wiring
- 50 ft. length makes it suitable for various residential and light commercial applications
Arteferro Right Hand Forged Leaf Wrought Iron Raw 7-1/16 x 5-1/8 x 5/32 Inch
These Arteferro Right Hand Forged Leaf Wrought Iron Raw components are uniquely Italian-designed, handcrafted with finely forged details. This Metal Art Leaf has a leaf design and features a 3/16" thickness. They are a perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates etc.
- Design/Style: Right Hand Forged Leaf
- Italian-designed
- Material: Wrought Iron
- Size: 7-1/16" x 5-1/8" x 5/32"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Arteferro S-Scroll With Grape 14-1/2 x 35-7/16 Inch
These Arteferro S-Scroll Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. This Ornate Panel has decorative grapes and flowers and features a 35-7/16" height. They are a perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates etc.
- Design/Style: S-Scroll With Grapes
- Italian-designed
- Material: Wrought Iron
- Size: 14-1/2" x 35-7/16"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Romex 100 Ft. 12-3 Solid Yellow NMW/G Electrical Wire
The Romex 100 Ft. 12/3 Solid Yellow NMW/G Electrical Wire is a high-quality, durable cable designed for residential and commercial wiring applications. Ideal for indoor use, this wire provides reliable power distribution to outlets, lighting, and appliances while meeting stringent safety and performance standards.
- High performance
- Safety compliant
- Versatile use
Southwire 12 AWG Solid THHN Black Electrical Wire 50′
Southwire’s 12 AWG Solid Black THHN wire delivers reliable performance for a wide range of electrical applications. It's designed for durability and ease of installation. This high-quality copper conductor provides excellent conductivity and long-lasting protection in both residential and commercial wiring projects.
- Heat, moisture, gasoline, and oil-resistant nylon jacket for enhanced protection
- Ideal for conduit systems, feeders, and general building wiring
- Solid copper conductor ensures efficient current flow and dependable electrical connections
