POWER TOOLS
Makita 18 Volt LXT Lithium-Ion Corded/Cordless Work Light (Bare Tool)
The 18V LXT lithium-ion corded/cordless LED (light-emitting diode) floodlight (DML805) offers the convenience of corded or cordless operation, and provides bright and even lighting for large workspaces without the high heat of halogens.
- At full brightness, it provides 750 lumens of light and 450 lumens on low mode.
- Adjusting knobs enable the user to direct the floodlight to the desired angle.
- The fast-charging 18V LXT lithium-ion 4.0 Ah battery (sold separately) delivers 10.5 hours of continuous illumination on a single charge.
- AC (alternating current) cord is easily stored and wrapped around the mounting stand base.
- An integrated handle can be used as a hanging hook for user convenience.
- Light will flash to alert the user when the battery charge is low.
- Compact at only 8-3/8 In. long.
- Worklight can be mounted on optional tripod light stand individually or with two floodlights (tripod light stand not included).
- Worklight can be mounted on an optional pipe clamp light stand (pipe clamp light stand not included).
Makita Lithium-Ion Drill Impact Kit
Cordless drill/driver with 2 speeds, 0-600 and 0-1900 rpm (revolutions per minute), delivers up to 480 In./Lb. (inches per pound) of max torque. Ergonomically designed handles with rubberized soft grips provide increased comfort.
- Drill Impact Kit
- Includes (1) 18V LXT 1/2 In. drill/driver, (1) 18V LXT impact driver , (1) 18V LXT lithium-ion charger , (2) 18V 1.5 Ah lithium-ion batteries, and (1) tool bag.
- Cordless
20V Max Lithium-Ion Drill & Reciprocating Saw Cordless Tool Combo Kit
This PORTER-CABLE combo kit comes with a 20V MAX* compact battery that operates both the Drill/Driver and Reciprocating Saw. The drill/driver features a high-performance motor that delivers the power needed to tackle tough jobs.
- Compact and lightweight to fit into tight spaces
- High-performance motor and 2-speed gear box to deliver the power needed
- Tool-free blade release for quick changes
- Its variable-speed trigger and pivoting shoe give you ultimate control
- Contoured over-molded handle for more comfort
- Includes (1) 20V MAX lithium-ion battery, charger, carry bag
- Model No. PCC601LB
Milwaukee M18 REDLITHUM High Output XC8.0 Tool Battery
The Milwaukee M18 REDLITHIUM High Output XC8.0 Battery Pack provides 50% more power and runs 50% cooler vs. M18 REDLITHIUM XC battery packs. The optimized combination of smaller size and increased power of the 18V battery provides a great solution for the entire range of M18 products. The lithium-ion battery delivers fade-free power and runs substantially cooler through heavy applications, allowing trade professionals to push their cordless tools throughout a wide application range.
- M18 REDLITHIUM Hgh Output XC8.0 Battery Pack
- Delivers fade-free power and runs substantially cooler through heavy applications
- Provides increased power in extreme-cold weather conditions below 0 F
- Fully compatible with all M18 solutions
Black and Decker GoPAK Cordless Drill 4-Tool Combo Kit
Give style and innovation to your home with this incredible combo kit, a model that offers you all the remodeling alternatives, so that you can carry out your project in a unique and great way. It includes: cordless drill/driver, jigsaw, sander and LED flash light to illuminate your workspace.
- 4-Tool Combo Kit
- Contains: Drill, Jig Saw , sander, work light
- Battery powered
- Voltage: 12
- Colour: Black
Genesis 20V 1/2 Inch Cordless Drill/Driver Kit
The Genesis GLD2012B Cordless Drill is Fully Featured and Designed to Take on the Most Demanding Projects. The 1/2" Single Sleeve All-Metal Ratcheting Chuck Securely Holds Bits. The High-Performance Motor Produces up to 450 in-lb of Torque, and the 2-Speed Gear Box Provides the Power and Speed to Match your Task. An LED Fuel Gauge Indicates the Remaining Charge.
- Compact, Lightweight, and Powerful
- Battery Holds its Charge up to 18 Months in Storage
- High-Performance Motor Produces up to 350 in-lbs of Torque
- Two Variable Speed Ranges for Versatility
- Built-In LED Work Light
- 21+1 Torque/Clutch Settings
- Electric Brake
Makita 2-Tool 18V LXT Lithium-Ion Brushless Hammer Drill/Driver & Impact Driver Cordless Tool Combo Kit
The 18V LXT Lithium-Ion Cordless 2-Piece Combo Kit packs two compact cordless tools with efficient brushless motors for a full range of drilling, driving, and fastening applications. The XT269M includes a versatile hammer driver-drill with all-metal gear construction for applications in wood, metal and masonry. Hammer driver-drill features Extreme Protection Technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions. Includes (1) 18V LXT compact brushless 1/2 In. hammer drill/driver (XPH12Z), (1) 18V LXT brushless impact driver (XDT13Z), (2) 18V LXT lithium-ion 4.0 Ah batteries (BL1840B), (1) 18V LXT lithium-ion rapid optimum charger (DC18RC) and (1) tool bag.
- Variable 2-speed 1/2 In. Hammer Driver-Drill (0-500 & 0-2,000 RPM) with brushless motor delivers 530 In./Lb. of max torque
- Variable speed Impact Driver (0-3,400 RPM & 0-3,600 IPM) with brushless motor delivers 1,500 In./Lb. of max torque
- For a full range of drilling, driving, and fastening applications
Westinghouse Cordless Impact Drill
This Cordless Impact drill combines innovation and efficiency to provide users with a superior drilling and fastening experience. It is a specialized type designed for driving screws and bolts with increased torque and efficiency.
- Cordless Drill
- With keyless metal chuck
- Torque control
- 2 Speed gearbox
- LED light control
M12-M18 RAPID CHARGER
The M18 and M12 rapid charge station is the fastest charging solution in the industry. With the ability to charge six-packs four times faster, the station charges three batteries simultaneously while charging each pack up to 40% faster.
- The charger accepts up to (3) M18 and (3) M12 battery packs, reducing the amount of time spent changing out batteries and increasing productivity on the job site.
- Featuring REDLINK Intelligence, it communicates directly with the battery to monitor cell voltage, temperature, and charge status to optimize the performance and extend the life of the pack.
- The station has integrated hang holes for vertical mounting, a pass-through plug to conserve outlet space, and a convenient carry handle to transport packs on and off the job site.
Makita Cordless Screwdriver
This Makita Cordless Screwdriver is made using high quality materials that make it sturdy and long lasting. It drives screws at a much faster rate and without any hassle. This kit is ideal for professionals and also for home use.
- Cordless Screwdriver
- Convertible: straight form or pistol form
- Handle is adjustable from 0 to 60 degrees
- LED light works via a separate switch on top
- 80pc bit set
2PK 18V LXT 5AH BATTERY
Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications.
- Battery resists self-discharge and remains ready for use even after long periods of storage.
- Delivers consistent power and run time in extreme temperatures (-4 F/-20 C).
Dewalt 20V Brushless Chainsaw
Dewalt 20V Brushless Chainsaw is designed for efficiency and durability. This lightweight tool delivers the cutting power you need for yard work, construction, and maintenance tasks without the hassle of gas.
- Maximizes runtime and motor life for consistent, powerful cuts
- Easy to maneuver and reduces user fatigue during extended use
- Quick and simple adjustments ensure optimal cutting performance on the go
Genesis 20V Lithium-Ion 1.5 Ah Tool Battery
20V Lithium-ion replacement battery is the replacement battery pack for Genesis 20-Volt cordless drill and Genesis 20-Volt cordless impact driver. Fits all tools in the Genesis 20-Volt Lithium-Ion power tool lineup. The battery can hold its charge for over 18 months in storage.
- Keep a backup battery on hand to ensure no down time due to charging
- Replacement battery pack for Genesis 20-Volt cordless tools
- High capacity 1.5Ah battery
Dewalt Powerstack 20V MAX Lithium-Ion 5.0 Ah Tool Battery
The Dewalt Powerstack 20V MAX Compact Battery is 50% more powerful, 25% more compact, and 15% lighter. This battery features an impact-resistant, rubber overmold base and utilizes revolutionary pouch cell battery technology to provide twice the lifetime. Engineered to get into tight spaces without sacrificing performance, our most powerful, most compact, and lightweight battery is compatible with the 20V MAX tools and chargers you already own.
- Durable, overmolded base provides impact resistance
- Battery provides 2X lifetime
- LED fuel gauge displays state-of-charge
- Battery works with all DEWALT 20V MAX tools and chargers
Dewalt Powerstack 20 Volt MAX Lithium-Ion 5 Ah Tool Battery & Charger Kit
The Dewalt PowerStack 5.0 Ah 20V MAX battery is our most powerful battery in its class. The 20V MAX Dewalt PowerStack 5.0Ah Battery utilizes revolutionary pouch cell technology to deliver 50% more power, 50% more work per charge, and 2X the lifespan. Compatible with all DEWALT 20V MAX* tools and chargers, the DEWALT POWERSTACK 5.0 Ah Battery features an impact-resistant, rubber overmolded base and includes 3-LED Fuel Gauge state of charge indicator.
- Packed with Power Get 50% more power to tackle tough jobs
- More Efficient Battery is 50% more efficient making it DEWALTs most efficient battery in its class+++.
- Durable Design: The non-marring over-molded rubber base also helps to protect finished surfaces
- Long-lasting: 2X lifespan** provides more overall investment value
- At-a-Glace Charge Status: Quickly check state-of-charge with 3-LED fuel gauge
- Compatibility with all DEWALT20V MAX* tools & chargers
Genesis 20V 2-Tool Lithium-Ion Drill/Driver & Impact Driver Cordless Tool
Compact, lightweight and powerful. The 20-Volt Lithium-Ion Drill Driver delivers 350 In./Lb. of torque power. Its high-speed transmission delivers 2 speeds (0-350 RPM and 0-1300 RPM) to ensure power and speed. 20-Volt Lithium-Ion Impact Driver delivers an incredible 1062 In./Lb. of torque power. The high-power variable speed transmission delivers 0-2200 RPM and 0-3800 IPM (impacts per minute). Both tools have ergonomic handles with rubber inserts. Both include built-in LED work lights, onboard battery power indicators and electric brakes. Combo Kit includes: (2) 20-Volt compact Lithium-ion 1.5Ah battery packs, compact charger, high-quality contractor's bag, and #2 Phillips power screwdriver bit.
- Compact, lightweight and powerful
- Built-in LED Work Light
- On-Board battery power indicator
- Electric Brake
Dewalt 20V Max Brushless Pruning Chainsaw, 8″
The Dewalt 20V Max Brushless Pruning Chainsaw. is engineered for efficiency and ease of use. with it being lightweight and cordless, this chainsaw delivers high cutting performance making it ideal for branches, shrubs, and small trees. The included 3.0 Ah battery and charger ensure reliable, extended runtime for professional or home use.
- Powerful Brushless Motor
- Compact & Lightweight Design
- Includes 20V Max 3.0 Ah lithium-ion battery and charger ready to use right out of the box
Makita 16 Gauge Nibbler
The Makita JN1601 Nibbler has a large 1/4 stroke for clean and precise work in keystone plate, deck plate and other corrugated sheet materials. The JN1601 has an ergonomic and slim body design for easy gripping, is extremely light for easy handling, and has a built-in thickness gauge for convenience.
DEWALT 7-1/4 Inch 15-Amp Lightweight Circular Saw
Product features: Among 1 of the lightest saws in its class at 8.8 lb. 15A motor, powerful enough for even the toughest applications. Anti-snag ball bearing lower guard provides smooth guard operation and long life in harsh environments. Tough cord provides longer durability against cord pull outs. Integrated dust blower function cleans the line of sight during cuttings. Durable high grade aluminum smooth base for accurate cuts. Clear line of sight aids in blade visibility from any angle.
- Powerful enough for even the toughest applications
- Integrated dust blower function
- Durable high grade aluminum smooth base for accurate cuts
- Tough cord
MK Morse Metal Devil 7 Inch Metal Cutting Circular Saw
The MK Morse Metal Devil 7-Inch Circular Saw is the ideal instrument for all-metal cutting such as steel, thin steel, aluminum and stainless steel. This circular saw offers a safer, cleaner way to cut metal. The special motor maintains torque at optimum RPM’s for cutting through metal smoothly and efficiently.
- 7-Inch circular saw
- Ideal instrument for all-metal cutting
- Cuts metal smoothly and efficiently
Dewalt Cordless Circular Saw Kit 20V 6 1/2″
Combining performance and versatility, the 20V MAX 6-1/2" Cordless Circular Saw is ready to take on a variety of cutting applications. It features a powerful brushless motor that delivers 4,950 rpm for fast, accurate, and consistent cutting.
- Cordless Circular Saw
- Electric brake
- Quickly adjust the bevel capacity from 0 - 50 degrees with the tool-free bevel lever
- Compatible with the DEWALT AirLock system or standard 35 mm dust extractor
- Dimensions: 15.5" x 11.56" x 8.18"
Makita 16 Gauge Shear
The Makita 16 Gauge Shear combines power and improved ergonomics for a range of metal cutting applications. The powerful 3.3 AMP motor delivers 4,000 SPM, with a minimum cutting radius of 1-3/16” for precision applications. Additional features include a lock-on switch for continuous operation, and a built-in thickness gauge for added convenience.
Makita Hammer Drill with Bit Set
Makita Hammer Drill is engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life.
- Hammer Drill
- 3 Operation mode: hammering, hammering with rotation, rotation
- Speed and torque in reverse are the same as forward rotation by using brush holder unit
- Large trigger switch and lock on button
Makita 4-1/2 Inch 6-Amp Angle Grinder
Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life. Slide switch design with lock-on for added user convenience. Protective zig-zag varnish seals the armature from dust and debris for longer tool life. All-ball bearing design and metal gear housing for added durability. Machined bevel gears provide up to 2 times longer service life. Side handle is positioned at an increased 20 deg (degrees angle for added comfort. Two-position adjustable side handle for operator convenience. Double insulated.
- 6 Amp motor delivers 11,000 RPM
- Small diameter (2-1/4 In.) barrel grip
- Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life
- Side handle is positioned at an increased 20 degree angle for added comfort
4.5AMP LAMINATE TRIMMER
Perfect for most trimming, small edge forming, and hinge routing applications.
- A powerful motor provides the power and durability required to cut in various materials.
- Ergonomics allow for comfortable, single-handed control.
- The precision-machined, cast-aluminum fixed base provides long-term durability.
- Extra-large locking knob allows for a quick motor release and/or course depth adjustment.
- Micro-set thumbwheel enables quick and accurate bit height adjustments.
- The spindle lock button allows for single wrench bit changes.
- LED (light-emitting diode) light and clear sub-base ensure maximum visibility in operation.
HAND TOOLS
Crescent Multi-Purpose Wire Cutter 10 Inch
The multi-purpose wire cutter from Crescent features ergonomic, non-slip grips that offer controlled cutting and reduce hand fatigue. Our upgraded design takes 25% lower force to cut than our prior models, allowing for quicker cutting. They will cut 2.4mm/0.09" wire in up to 46HRC.
- Optimal blade angle design allows for flush cuts and greater material access
- Ergonomic, non-slip grips enhance control and reduce hand fatigue
- Cuts 2.4mm/0.09in wire up to 46HRC
- Effortless auto-unlock latch for quick and easy use
Fiskars Groove Blade & Knife Sharpener
Sharpens axes and knives. Ceramic wheels sharpen both sides of the blade at a precise 30 Deg (degree) angle. A safety guard protects hands and fingers while sharpening. Non-slip pads on the base give a stable base for sharpening. Opens for easy cleaning. Fiber Comp construction-reinforced fiberglass composite materials provide strength and durability. Lifetime warranty.
- Ceramic wheels
- Sharpens axes and knives
- Features a safety guard to protect hands and fingers
Rain-X Truck & SUV Rugged Weather Tough Blade 24 Inch
RX Truck SUV rugged wiper blade features premium beam technology. Engineered for reducing wind lift at high speeds. Blade size is imprinted on the spoiler. Color change technology - indicator turns from black to yellow to signal when it's time to change the blades. Designed for those drivers who use their vehicles for work, play, and outdoor adventures.
- Synthetic rubber squeegee
- Blade size imprinted on the spoiler
- Color change technology
- 24 Inch
Do it 4″ Plastic Taping Knife
Made of durable molded plastic. Hundreds of uses from taping drywall joints to smoothing wallpaper. This knife is versatile for many uses and jobs.
- Taping Knife
- Designed with durable molded plastic
- Tapered end is reinforced to resist breaking
- Knife is versatile for many uses and jobs
- Material: Plastic
- Size: 4"
Black Recycled Plastic Rectangular Boot Tray
Extra-large black boot tray is made of strong and sturdy recycled plastic material. Raised lip around the edges to prevent dirt and liquids from overflowing onto the flooring. Protects floor from sand, mud, salt, slush, and more. Well-defined grooves provide additional protection for shoes and boots.
- Recycled plastic construction
- Raised lip
- Well defined grooves
- 15.75x23.5 Inch
QEP Lash Tile Leveling Wedges Yellow 100-Pack
Install tile with professional results while saving time with QEP LASH Tile Leveling Wedges. These Wedges, Part B of a 2-part system, hold the tile at an even height for lippage-free results, ensuring a consistent finish and correcting tile bowing.
- Use with LASH Clips (sold separately) to Level, Align, Space and Hold (LASH) during tile installation
- For leveling all tile types, including porcelain, ceramic, marble and natural stone
- Designed with locking ribs on top for a secure hold
- Wedges are reusable for your next tile installation job
- Can be used with traditional tile spacers up to 1/4"
- For faster installation use QEP Pro Installation Pliers
Stainless Steel Worktable NSF, 49″ x 24″ x 35.5″
This Stainless Steel worktable is great for garages, restaurants, laboratories, warehouses, mail rooms, work centers, etc. It features chrome-plated steel legs with a heavy-duty adjustable shelf.
- Worktable
- Brushed stainless steel table top with bullnose edge
- Heavy-duty steel wire shelf adjustable at 1" increments
- Thick 1.5" diameter heavy-duty steel poles/posts
- Easy assembly, no tools required
- Dimensions: 49" x 24" x 35.5"
Socket & Bit Set With Mini Ratchet 53 Piece
The OEMTOOLS 53-piece socket and bit set comes with a compact 72-tooth ratcheting driver with both forward and reverse, an adapter to use 1/4 inch sockets along with a 3/8 inch extension bar to reach and fasten-in tight or narrow places. The set includes 14-1/4 inch drive Metric and SAE sockets and 35-1 inch heavy duty chromium–vanadium steel screwdriver bits. The varying sized bit types include: Phillips, slotted, square, hex and star.
- Sockets and bits are engraved for easy identification
- Compact folding storage case: Open: 9-1/2 X 4-1/2 inch; Closed: 4-1/2 X 4-1/2 inch
- 53 Piece Set
Channellock 10 Lb Double-Faced Sledge Hammer 32 Inch Handle
Channellocks double-faced sledge hammer is constructed with a head forged from high-quality carbon steel. Hardened and tempered. Gray painted finish with polished face. Dual injected fiberglass handle for better strength, grip, and comfort. Built strong and durable to withstand force and last making it ideal for any application it may be needed for.
- 10 Lb head weight
- High-quality carbont steel forged head
- Handle is comprised of dual injected fiberglass providing great grip and comfort
Gardner Bender Non-Contact Voltage Detector
Non-contact voltage tester audibly (beeping) and visually (flashing) indicates the presence of AC voltage from 50V to 600V. Use to locate breaks in wires and voltage at receptacles, switches and motors.
- Built-in safe-test indicates tester and batteries are working properly.
- Requires (1) AAA battery, not included.
Brown USA 24 Inch Proffesional Aluminum Level
The Brown USA Level 24" Professional Aluminum Box Level is a must-have for any job site. Durable, accurate and ergonomic this box level is a job site essential. Its reinforced aerospace aluminum alloy frame provides the durability needed on even the roughest job site. The top reading vials make it easy to see when you have a straight edge.
- Top reading vials
- Ruled markings on edge in centimeters and inches
- Durable and shock resistant
- Size: 24 Inch
Channellock No. 4 Hammer Tacker Staple 3/8 Inch 5000 Pk
Channellock hammer tacker staples are built for durability and designed for strength. Hang trim, upholstery, insulation or remodel a home, fix a broken part all with these heavy-duty staples. Ideal for wood and foam materials. 5,000 per pack so you don't have to keep running out. For use in Arrow T50 and HT50, Rapid 11-1/4 inch, Senco H06, and Channellock hammer tacker staple guns.
- Holds thicker materials like wood and insulation, thin paper and fabrics
- Guaranteed to fit POWERFAST and SWINGLINE staplers
- Load quickly with the easy drop in of these staples
- 3/8 Inch Leg Length and 3/8 Inch crown width
- Built for durability and strength
Stanley Cabinet Tip Slotted Screwdriver 3/16 x 6 Inch
The Stanley 100 PLUS Cabinet Tip Screwdriver is built to withstand heavy-duty applications with its 100% acetate handle. Precision cold-formed tips provide high torque performance. This versatile screwdriver works well in a multitude of applications making it a must-have in your toolbox.
- Built to withstand heavy-duty applications with its 100% acetate handle
- Precision cold-formed tips provide high torque performance
- Must-have in your toolbox
- Size: 3/16 x 6 Inch
CLEARANCE SALE!
Coleman Cable 500 Ft. 16-2 Stranded Speaker Wire
The Coleman Cable 500 Ft. 16-2 Stranded Speaker Wire is designed for high-quality audio transmission, this durable and flexible wire is ideal for home theaters, sound systems, and commercial installations. Its stranded copper conductors ensure clear, consistent sound while minimizing signal loss over long.
- Stranded copper conductors provide clear, accurate sound with minimal interference
- Easy to install around corners and through walls without compromising performance
- 500 ft. spool offers ample wire for large installations or multiple speaker setups
Wrought Iron Scroll (93/3) With Leaves, 7-7/8 Inch (W) X 17-11/16 Inch (H)
These Arteferro Wrought Iron components are uniquely Italian-designed, hand crafted with finely forged details. Scrolls feature unique leaves designs and decorative end finishes. Combining scrolls with other designs can create fences, stairs or balcony railings that will make your project unique.
Design/Style: Scrolls
Selection Size: 1/2" X 1/4"
Width: 7-7/8"
Height: 17-11/16"
Weight: 1.7lbs
Material: Wrought Iron
Arteferro Sphere Hot Stamped 3-1/8 Inch
These Arteferro Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. Spheres make the perfect finishing touch to wrought iron railing projects. These wrought iron components compliment any traditional or modern commercial or home design weather.
- Italian-designed
- Designed to be combined with many other Arteferro components
- Raw wrought iron finish allows you to choose the finish that’s perfect for your project
- Design/Style: Spheres
- Diameter: 3-1/8″
- Material: Wrought Iron
Amanco Gutter Rectangle Outlet
Amanco Gutter Rectangle Outlet can be used to connect 5 in. aluminum gutters to downspouts and elbows. To install, attach the gutter end with screws or pop rivets (not included) and use a seamer to attach to the gutter (not included). The Rectangle Gutter Outlet connects the gutter to the downspout, ensuring a snug fit to avoid leaking.
- Rectangle Gutter Outlet
- Aluminum construction for durability
- Use to connect gutters to downspouts and elbows
- Attach with screws or pop rivets (not included) and use connectors (not included) to join to gutter
Wrought Iron Large Butterfly (137/10), 6-7/8 Inch (W) X 4-15/16 Inch (H)
These Arteferro Wrought Iron components are uniquely Italian-designed, hand crafted with finely forged details. Arteferro's flowers and ornaments are also the perfect complement to wrought iron railings, wrought iron garden art or metal home accessories. Select from things like forged grapes, leaves, stamped leaves, or flowers to create a natural, wrought iron charm.
Design/Style: Flowers and Ornaments
Selection Size: 0.0197"
Width: 6-7/8"
Height: 4-15/16"
Weight: 0.15 lbs
Material: Wrought Iron
Arteferro Left Hand Forged Leaf Wrought Iron Raw 7-1/16 x 5-1/8 x 5/32 Inch
These Arteferro Left Hand Forged Leaf Wrought Iron Raw components are uniquely Italian-designed, handcrafted with finely forged details. This Metal Art Leaf has a leaf design and features a 7 1/16" height. They are a perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates etc.
- Design/Style: Left Hand Forged Leaf
- Italian-designed
- Material: Wrought Iron
- Size: 7-1/16" x 5-1/8" x 5/32"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Bussmann 20A NON Cartridge General Purpose Cartridge Fuse (2-Pack)
Bussmann 20A NON Cartridge General Purpose Fuse is designed for consistent performance, this fuse provides dependable protection for electrical circuits and equipment against overloads and short circuits. Ideal for residential, commercial, and light industrial applications.
- 20-amp, 250-volt general-purpose fuse for dependable circuit protection
- Time-delay design helps prevent unnecessary fuse blows from temporary surges
- Durable construction for long-lasting performance and easy installation
RCA 18-2 Stranded Speaker Wire, 50′
RCA 18-2 Stranded Speaker Wire delivers clear, consistent sound transmission for home theater systems, car audio, and general speaker installations. Its flexible stranded copper design ensures easy routing, while the 50-foot length provides ample reach for a variety of setups.
- High-quality 18-gauge stranded wire for reliable signal transfer and enhanced audio clarity
- Durable, flexible insulation makes installation simple, even around tight corners or long runs
- Ideal for home, office, or custom audio projects requiring extended reach
Bussmann 30A FRN-R Cartridge Heavy-Duty Time Delay Cartridge Fuse (2-Pack)
Bussmann 30A FRN-R Heavy-Duty Time Delay Cartridge Fuse delivers reliable overload and short-circuit protection for a wide range of industrial and commercial applications. It's designed for long-lasting performance, these fuses ensure consistent operation in motor circuits and other high inrush current systems.
- Heavy-duty time-delay design allows for temporary overloads without unnecessary fuse blows
- Rated at 30 amps for dependable protection in demanding electrical systems
- UL Listed and CSA Certified for proven safety and performance standards
Wrought Iron Spear Point (124/3) Stamped Base, 4-7/8 Inch (H)
These Arteferro Wrought Iron components are uniquely Italian-designed, hand crafted with finely forged details. Arteferro's flowers and ornaments are the perfect complement to wrought iron railings, wrought iron garden art or metal home accessories. Select from things like forged grapes, leaves, stamped leaves, or flowers to create a natural, wrought iron charm.
Design/Style: Spear Point Stamped Base
Selection Size: 1/2" dia.
Height: 4-7/8"
Weight: 0.3lbs
Material: Wrought Iron
Arteferro Picket Wrought Iron 1/2 Inch Square With Single Bronze Basket
Arteferro Wrought Iron Pickets are one of the most important elements of the infill in a balustrade or fencing. The classic design displays refined taste structures and has the potential to add a little more uniqueness and variety to your wrought iron staircase or railing.
- Design/Style: Pickets
- Size: 1/2″ square
- Material: Wrought Iron
- Single-basket design
- Colour: Bronze
- Adds a little more uniqueness and variety to your wrought iron staircase or railing
RCA16-2 Stranded Speaker Wire, 50′
The RCA 50 Ft. 16-2 Stranded Speaker Wire is designed for home audio systems, surround sound setups, and custom installations, this flexible wire ensures clear signal transmission and easy routing around corners and tight spaces.
- Durable 16-gauge stranded copper wire for optimal sound clarity and reduced signal loss
- Flexible, easy-to-install design ideal for home theaters, speakers, and custom audio layouts
- 50 ft. length provides ample reach for multiple speaker placements and larger rooms
Romex 25 Ft. 14-3 Solid White NMW/G Electrical Wire
The Romex 14-3 Solid White NMW/G Electrical Wire is designed for safe, reliable residential wiring applications. Its durable construction and grounded design make it ideal for lighting circuits, general household wiring, and other indoor electrical installations. With a 25-foot length, it offers convenient flexibility for small to medium projects while maintaining high performance and compliance with industry standards.
- 14-gauge, 3-conductor solid copper wire for dependable power distribution and long-lasting performance
- NMW/G sheathing provides added protection and includes a ground wire for enhanced electrical safety
- 25 ft. length is perfect for repairs, upgrades, and targeted indoor wiring installations
Arteferro Forged Left Hand Leaf, (7-7/8″ x 5-7/8″ x 1/2″)
These Arteferro Forged Left Hand Leaf Wrought Iron Raw components are uniquely Italian-designed, handcrafted with finely forged details. This Metal Art Leaf has a leaf design and features a 7-7/8" height. They are a perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates etc.
- Design/Style: Forged Left Hand Leaf
- Italian-designed
- Material: Wrought Iron
- Size: 7-7/8" x 5-7/8" x 1/2"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Arteferro Stamped Raw Leaf 3/16 Inch
These Arteferro Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. Stamped wrought iron leaves have always been an inexpensive way to create simplistic or even sophisticated pieces of metal art. They would make excellent choices when looking to top off a wrought iron fence or gate.
- Design/Style: Stamped Raw Leaf
- Italian-designed
- Material: Wrought Iron
- Size: 4-15/16" x 3-9/16" x 3/16"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Romex 14-3 Solid NMW/G Electrical Wire, White 250′
Romex 14-3 Solid NMW/G Electrical Wire is designed for reliable residential and light commercial wiring applications. It's designed with durable PVC insulation and a grounded three-conductor. This cable delivers consistent performance for switches, outlets, and lighting circuits.
- Durable Construction
- Ideal for household branch circuits, lighting, and general wiring projects.
- Easy Identification
- Approved for service to 600 volts
- Flame-retardant and crush-resistant
Wrought Iron Spear Point (124/1) Stamped Base, 4-15/16 Inch (H)
These Arteferro Wrought Iron components are uniquely Italian-designed, hand crafted with finely forged details. Arteferro's flowers and ornaments are the perfect complement to wrought iron railings, wrought iron garden art or metal home accessories. Select from things like forged grapes, leaves, stamped leaves, or flowers to create a natural, wrought iron charm.
Design/Style: Spear Point Stamped Base
Selection Size: 1/2" dia.
Height: 4-15/16"
Weight: 0.4lbs
Material: Wrought Iron
Arteferro Sphere Hot Stamped 3-15/16 Inch
These Arteferro Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. Spheres make the perfect finishing touch to wrought iron railing projects. These wrought iron components compliment any traditional or modern commercial or home design weather.
- Italian-designed
- Designed to be combined with many other Arteferro components
- Raw wrought iron finish allows you to choose the finish that's perfect for your project
- Design/Style: Spheres
- Diameter: 3-15/16"
- Material: Wrought Iron
Arteferro Brass Leaf Stamped 1-9/16″
These Arteferro Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. Stamped wrought iron leaves have always been an inexpensive way to create simplistic or even sophisticated pieces of metal art. They would make excellent choices when looking to top off a wrought iron fence or gate. This Metal Art Stamped Leaf has a brass stamped design and features a 4-5/16" width.
- Design/Style: Stamped Raw Leaf
- Italian-designed
- Material: Wrought Iron
- Size: 1-9/16" x 4-5/16"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Arteferro Forged Leaf Design Wrougth Iron Raw, (8-5/8″ x 4-1/2″ x 5/32″)
These Arteferro Forged Leaf Design Wrought Iron Raw components are uniquely Italian-designed, handcrafted with finely forged details. This Metal Art Leaf has a leaf design and features a 4 1/2" width. They are a perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates etc.
- Design/Style: Forged Leaf Design
- Italian-designed
- Material: Wrought Iron
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Arteferro Right Hand Forged Leaf Wrought Iron Raw 7-1/16 x 5-1/8 x 5/32 Inch
These Arteferro Right Hand Forged Leaf Wrought Iron Raw components are uniquely Italian-designed, handcrafted with finely forged details. This Metal Art Leaf has a leaf design and features a 3/16" thickness. They are a perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates etc.
- Design/Style: Right Hand Forged Leaf
- Italian-designed
- Material: Wrought Iron
- Size: 7-1/16" x 5-1/8" x 5/32"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Arteferro Rosette Wrought Iron 9-7/8 Inch
These Arteferro Rosette Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. This Modern Rosette has a 9 7/8" width and features a 9 13/16" external diameter. They are a perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates etc.
- Design/Style: Rosette
- Italian-designed
- Material: Wrought Iron
- Size: 9-7/8"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Romex 100 Ft. 12-3 Solid Yellow NMW/G Electrical Wire
The Romex 100 Ft. 12/3 Solid Yellow NMW/G Electrical Wire is a high-quality, durable cable designed for residential and commercial wiring applications. Ideal for indoor use, this wire provides reliable power distribution to outlets, lighting, and appliances while meeting stringent safety and performance standards.
- High performance
- Safety compliant
- Versatile use
Amanco Gutter Downpipe Rectangle
Used to facilitate the collection of rain water from rooftop, this gutter downpipe controls the direction of water away from a building. Constructed from PVC material for durability and corrosion resistance, it easy to install and protects a building's walls, foundation, window frames and people.
- Controls the flow of rain water
- Durable
- Corrosion resistant
- Easy to install
- Protects walls, foundation, window frames and people
