POWER TOOLS
Makita 18 Volt LXT Lithium-Ion Corded/Cordless Work Light (Bare Tool)
The 18V LXT lithium-ion corded/cordless LED (light-emitting diode) floodlight (DML805) offers the convenience of corded or cordless operation, and provides bright and even lighting for large workspaces without the high heat of halogens.
- At full brightness, it provides 750 lumens of light and 450 lumens on low mode.
- Adjusting knobs enable the user to direct the floodlight to the desired angle.
- The fast-charging 18V LXT lithium-ion 4.0 Ah battery (sold separately) delivers 10.5 hours of continuous illumination on a single charge.
- AC (alternating current) cord is easily stored and wrapped around the mounting stand base.
- An integrated handle can be used as a hanging hook for user convenience.
- Light will flash to alert the user when the battery charge is low.
- Compact at only 8-3/8 In. long.
- Worklight can be mounted on optional tripod light stand individually or with two floodlights (tripod light stand not included).
- Worklight can be mounted on an optional pipe clamp light stand (pipe clamp light stand not included).
Genesis 20V 1/2 Inch Cordless Drill/Driver Kit
The Genesis GLD2012B Cordless Drill is Fully Featured and Designed to Take on the Most Demanding Projects. The 1/2" Single Sleeve All-Metal Ratcheting Chuck Securely Holds Bits. The High-Performance Motor Produces up to 450 in-lb of Torque, and the 2-Speed Gear Box Provides the Power and Speed to Match your Task. An LED Fuel Gauge Indicates the Remaining Charge.
- Compact, Lightweight, and Powerful
- Battery Holds its Charge up to 18 Months in Storage
- High-Performance Motor Produces up to 350 in-lbs of Torque
- Two Variable Speed Ranges for Versatility
- Built-In LED Work Light
- 21+1 Torque/Clutch Settings
- Electric Brake
Dewalt Powerstack 20V MAX Lithium-Ion 5.0 Ah Tool Battery
The Dewalt Powerstack 20V MAX Compact Battery is 50% more powerful, 25% more compact, and 15% lighter. This battery features an impact-resistant, rubber overmold base and utilizes revolutionary pouch cell battery technology to provide twice the lifetime. Engineered to get into tight spaces without sacrificing performance, our most powerful, most compact, and lightweight battery is compatible with the 20V MAX tools and chargers you already own.
- Durable, overmolded base provides impact resistance
- Battery provides 2X lifetime
- LED fuel gauge displays state-of-charge
- Battery works with all DEWALT 20V MAX tools and chargers
Genesis 20V 2-Tool Lithium-Ion Drill/Driver & Impact Driver Cordless Tool
Compact, lightweight and powerful. The 20-Volt Lithium-Ion Drill Driver delivers 350 In./Lb. of torque power. Its high-speed transmission delivers 2 speeds (0-350 RPM and 0-1300 RPM) to ensure power and speed. 20-Volt Lithium-Ion Impact Driver delivers an incredible 1062 In./Lb. of torque power. The high-power variable speed transmission delivers 0-2200 RPM and 0-3800 IPM (impacts per minute). Both tools have ergonomic handles with rubber inserts. Both include built-in LED work lights, onboard battery power indicators and electric brakes. Combo Kit includes: (2) 20-Volt compact Lithium-ion 1.5Ah battery packs, compact charger, high-quality contractor's bag, and #2 Phillips power screwdriver bit.
- Compact, lightweight and powerful
- Built-in LED Work Light
- On-Board battery power indicator
- Electric Brake
M12-M18 RAPID CHARGER
The M18 and M12 rapid charge station is the fastest charging solution in the industry. With the ability to charge six-packs four times faster, the station charges three batteries simultaneously while charging each pack up to 40% faster.
- The charger accepts up to (3) M18 and (3) M12 battery packs, reducing the amount of time spent changing out batteries and increasing productivity on the job site.
- Featuring REDLINK Intelligence, it communicates directly with the battery to monitor cell voltage, temperature, and charge status to optimize the performance and extend the life of the pack.
- The station has integrated hang holes for vertical mounting, a pass-through plug to conserve outlet space, and a convenient carry handle to transport packs on and off the job site.
Dewalt 20V Brushless Chainsaw
Dewalt 20V Brushless Chainsaw is designed for efficiency and durability. This lightweight tool delivers the cutting power you need for yard work, construction, and maintenance tasks without the hassle of gas.
- Maximizes runtime and motor life for consistent, powerful cuts
- Easy to maneuver and reduces user fatigue during extended use
- Quick and simple adjustments ensure optimal cutting performance on the go
Westinghouse Cordless Impact Drill
This Cordless Impact drill combines innovation and efficiency to provide users with a superior drilling and fastening experience. It is a specialized type designed for driving screws and bolts with increased torque and efficiency.
- Cordless Drill
- With keyless metal chuck
- Torque control
- 2 Speed gearbox
- LED light control
Makita Lithium-Ion Drill Impact Kit
Cordless drill/driver with 2 speeds, 0-600 and 0-1900 rpm (revolutions per minute), delivers up to 480 In./Lb. (inches per pound) of max torque. Ergonomically designed handles with rubberized soft grips provide increased comfort.
- Drill Impact Kit
- Includes (1) 18V LXT 1/2 In. drill/driver, (1) 18V LXT impact driver , (1) 18V LXT lithium-ion charger , (2) 18V 1.5 Ah lithium-ion batteries, and (1) tool bag.
- Cordless
2PK 18V LXT 5AH BATTERY
Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications.
- Battery resists self-discharge and remains ready for use even after long periods of storage.
- Delivers consistent power and run time in extreme temperatures (-4 F/-20 C).
Dewalt 20V Max Brushless Pruning Chainsaw, 8″
The Dewalt 20V Max Brushless Pruning Chainsaw. is engineered for efficiency and ease of use. with it being lightweight and cordless, this chainsaw delivers high cutting performance making it ideal for branches, shrubs, and small trees. The included 3.0 Ah battery and charger ensure reliable, extended runtime for professional or home use.
- Powerful Brushless Motor
- Compact & Lightweight Design
- Includes 20V Max 3.0 Ah lithium-ion battery and charger ready to use right out of the box
Makita Cordless Screwdriver
This Makita Cordless Screwdriver is made using high quality materials that make it sturdy and long lasting. It drives screws at a much faster rate and without any hassle. This kit is ideal for professionals and also for home use.
- Cordless Screwdriver
- Convertible: straight form or pistol form
- Handle is adjustable from 0 to 60 degrees
- LED light works via a separate switch on top
- 80pc bit set
20V Max Lithium-Ion Drill & Reciprocating Saw Cordless Tool Combo Kit
This PORTER-CABLE combo kit comes with a 20V MAX* compact battery that operates both the Drill/Driver and Reciprocating Saw. The drill/driver features a high-performance motor that delivers the power needed to tackle tough jobs.
- Compact and lightweight to fit into tight spaces
- High-performance motor and 2-speed gear box to deliver the power needed
- Tool-free blade release for quick changes
- Its variable-speed trigger and pivoting shoe give you ultimate control
- Contoured over-molded handle for more comfort
- Includes (1) 20V MAX lithium-ion battery, charger, carry bag
- Model No. PCC601LB
Milwaukee M18 REDLITHUM High Output XC8.0 Tool Battery
The Milwaukee M18 REDLITHIUM High Output XC8.0 Battery Pack provides 50% more power and runs 50% cooler vs. M18 REDLITHIUM XC battery packs. The optimized combination of smaller size and increased power of the 18V battery provides a great solution for the entire range of M18 products. The lithium-ion battery delivers fade-free power and runs substantially cooler through heavy applications, allowing trade professionals to push their cordless tools throughout a wide application range.
- M18 REDLITHIUM Hgh Output XC8.0 Battery Pack
- Delivers fade-free power and runs substantially cooler through heavy applications
- Provides increased power in extreme-cold weather conditions below 0 F
- Fully compatible with all M18 solutions
Black and Decker GoPAK Cordless Drill 4-Tool Combo Kit
Give style and innovation to your home with this incredible combo kit, a model that offers you all the remodeling alternatives, so that you can carry out your project in a unique and great way. It includes: cordless drill/driver, jigsaw, sander and LED flash light to illuminate your workspace.
- 4-Tool Combo Kit
- Contains: Drill, Jig Saw , sander, work light
- Battery powered
- Voltage: 12
- Colour: Black
Dewalt Powerstack 20 Volt MAX Lithium-Ion 5 Ah Tool Battery & Charger Kit
The Dewalt PowerStack 5.0 Ah 20V MAX battery is our most powerful battery in its class. The 20V MAX Dewalt PowerStack 5.0Ah Battery utilizes revolutionary pouch cell technology to deliver 50% more power, 50% more work per charge, and 2X the lifespan. Compatible with all DEWALT 20V MAX* tools and chargers, the DEWALT POWERSTACK 5.0 Ah Battery features an impact-resistant, rubber overmolded base and includes 3-LED Fuel Gauge state of charge indicator.
- Packed with Power Get 50% more power to tackle tough jobs
- More Efficient Battery is 50% more efficient making it DEWALTs most efficient battery in its class+++.
- Durable Design: The non-marring over-molded rubber base also helps to protect finished surfaces
- Long-lasting: 2X lifespan** provides more overall investment value
- At-a-Glace Charge Status: Quickly check state-of-charge with 3-LED fuel gauge
- Compatibility with all DEWALT20V MAX* tools & chargers
Genesis 20V Lithium-Ion 1.5 Ah Tool Battery
20V Lithium-ion replacement battery is the replacement battery pack for Genesis 20-Volt cordless drill and Genesis 20-Volt cordless impact driver. Fits all tools in the Genesis 20-Volt Lithium-Ion power tool lineup. The battery can hold its charge for over 18 months in storage.
- Keep a backup battery on hand to ensure no down time due to charging
- Replacement battery pack for Genesis 20-Volt cordless tools
- High capacity 1.5Ah battery
Makita 2-Tool 18V LXT Lithium-Ion Brushless Hammer Drill/Driver & Impact Driver Cordless Tool Combo Kit
The 18V LXT Lithium-Ion Cordless 2-Piece Combo Kit packs two compact cordless tools with efficient brushless motors for a full range of drilling, driving, and fastening applications. The XT269M includes a versatile hammer driver-drill with all-metal gear construction for applications in wood, metal and masonry. Hammer driver-drill features Extreme Protection Technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions. Includes (1) 18V LXT compact brushless 1/2 In. hammer drill/driver (XPH12Z), (1) 18V LXT brushless impact driver (XDT13Z), (2) 18V LXT lithium-ion 4.0 Ah batteries (BL1840B), (1) 18V LXT lithium-ion rapid optimum charger (DC18RC) and (1) tool bag.
- Variable 2-speed 1/2 In. Hammer Driver-Drill (0-500 & 0-2,000 RPM) with brushless motor delivers 530 In./Lb. of max torque
- Variable speed Impact Driver (0-3,400 RPM & 0-3,600 IPM) with brushless motor delivers 1,500 In./Lb. of max torque
- For a full range of drilling, driving, and fastening applications
4.5AMP LAMINATE TRIMMER
Perfect for most trimming, small edge forming, and hinge routing applications.
- A powerful motor provides the power and durability required to cut in various materials.
- Ergonomics allow for comfortable, single-handed control.
- The precision-machined, cast-aluminum fixed base provides long-term durability.
- Extra-large locking knob allows for a quick motor release and/or course depth adjustment.
- Micro-set thumbwheel enables quick and accurate bit height adjustments.
- The spindle lock button allows for single wrench bit changes.
- LED (light-emitting diode) light and clear sub-base ensure maximum visibility in operation.
Dewalt Cordless Circular Saw Kit 20V 6 1/2″
Combining performance and versatility, the 20V MAX 6-1/2" Cordless Circular Saw is ready to take on a variety of cutting applications. It features a powerful brushless motor that delivers 4,950 rpm for fast, accurate, and consistent cutting.
- Cordless Circular Saw
- Electric brake
- Quickly adjust the bevel capacity from 0 - 50 degrees with the tool-free bevel lever
- Compatible with the DEWALT AirLock system or standard 35 mm dust extractor
- Dimensions: 15.5" x 11.56" x 8.18"
DEWALT 7-1/4 Inch 15-Amp Lightweight Circular Saw
Product features: Among 1 of the lightest saws in its class at 8.8 lb. 15A motor, powerful enough for even the toughest applications. Anti-snag ball bearing lower guard provides smooth guard operation and long life in harsh environments. Tough cord provides longer durability against cord pull outs. Integrated dust blower function cleans the line of sight during cuttings. Durable high grade aluminum smooth base for accurate cuts. Clear line of sight aids in blade visibility from any angle.
- Powerful enough for even the toughest applications
- Integrated dust blower function
- Durable high grade aluminum smooth base for accurate cuts
- Tough cord
Makita 16 Gauge Nibbler
The Makita JN1601 Nibbler has a large 1/4 stroke for clean and precise work in keystone plate, deck plate and other corrugated sheet materials. The JN1601 has an ergonomic and slim body design for easy gripping, is extremely light for easy handling, and has a built-in thickness gauge for convenience.
MK Morse Metal Devil 7 Inch Metal Cutting Circular Saw
The MK Morse Metal Devil 7-Inch Circular Saw is the ideal instrument for all-metal cutting such as steel, thin steel, aluminum and stainless steel. This circular saw offers a safer, cleaner way to cut metal. The special motor maintains torque at optimum RPM’s for cutting through metal smoothly and efficiently.
- 7-Inch circular saw
- Ideal instrument for all-metal cutting
- Cuts metal smoothly and efficiently
Makita 4-1/2 Inch 6-Amp Angle Grinder
Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life. Slide switch design with lock-on for added user convenience. Protective zig-zag varnish seals the armature from dust and debris for longer tool life. All-ball bearing design and metal gear housing for added durability. Machined bevel gears provide up to 2 times longer service life. Side handle is positioned at an increased 20 deg (degrees angle for added comfort. Two-position adjustable side handle for operator convenience. Double insulated.
- 6 Amp motor delivers 11,000 RPM
- Small diameter (2-1/4 In.) barrel grip
- Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life
- Side handle is positioned at an increased 20 degree angle for added comfort
Makita Hammer Drill with Bit Set
Makita Hammer Drill is engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life.
- Hammer Drill
- 3 Operation mode: hammering, hammering with rotation, rotation
- Speed and torque in reverse are the same as forward rotation by using brush holder unit
- Large trigger switch and lock on button
Makita 16 Gauge Shear
The Makita 16 Gauge Shear combines power and improved ergonomics for a range of metal cutting applications. The powerful 3.3 AMP motor delivers 4,000 SPM, with a minimum cutting radius of 1-3/16” for precision applications. Additional features include a lock-on switch for continuous operation, and a built-in thickness gauge for added convenience.
HAND TOOLS
Dewalt Tstak Organizer
Part of the Dewalt TSTAK portable tool storage system. Stackable and connectable with a bi-material handle for easy and comfortable lifting. Removable compartments, two large and five small, for small parts and accessories. Rust-resistant, heavy-duty metal latches. Clear and impact-resistant unique lid design locks all compartments in place with full visibility for quick access.
- Stackable and connectable with a bi-material handle for easy and comfortable lifting
- Removable compartments
- Two large and five small, for small parts and accessories
- Rust-resistant, heavy-duty metal latches
- Clear and impact-resistant unique lid design locks all compartments in place with full visibility for quick access
- Dimension: 13 Inch W x 5.75 Inch H x 17.25 Inch L
Metric Hex Key (4mm)
Easily tighten and loosen hex screws with hey keys. A hex key, also known as an Allen wrench, is an L-shaped tool used to drive bolts and screws that have a hexagonal socket in the head. Use this tool to assemble bicycles, adjust handlebars, remove pedals and more. Also included in Hillman assortment #57109 / label #98152.
Brand: Hillman
Drive Style: Hex
Inches-Metric: Inches
Interior-Exterior: Exterior
Point Type: Blunt
Thread Type: USS Coarse
Base Material: Steel
Diameter: M4
Finish: Heat-treated
Package Type: Refill
Primary Color: Gray
Product Size: M4
Forney E71T-GS 0.035 Inch 10 Lb Flux Core Mild Steel Mig Wire
E71T-GS flux core MIG (GMAW) welding wire for mild steel is self-shielded mild steel all position flux cored MIG welding wire. Best suited to single pass applications with high travel speed. Moderate to low spatter. Although no gas is required, an Argon/CO2 mix will reduce spatter. Excellent on thin gauge mild steel.
- Excellent on thin gauge mild steel
- Best suited to single pass applications
- Moderate to low spatter
Nicholson Mill Bastard File 8 Inch
The Nicholson Mill File is single cut on the sides and edges. It also features 2 square edges. All sizes of Nicholson Mill Files taper slightly in width. Does not include handle.
- American pattern half round file, bastard cut
- Precision engineered to provide maximum gram removal per stroke and amazing longevity
- 8 Inch
Rite in the Rain Medium Point Black All-Weather Pen
Rite in the Rain all-weather durable rubberized plastic clicker pen contains permanent black ink that will write through water, grease, and mud. The pressured cartridge can write sideways and upside down, on wet paper, and through extreme conditions from -30 Deg. F to 250 Deg. F. Ink will not leak or evaporate. 5-3/8 In. long. Includes plastic pocket clip.
- Pressured cartridge can write sideways and upside down, on wet paper and through extreme conditions
- All-weather durable rubberized plastic
- Writes through water, grease, & mud
- Ink will not leak or evaporate
- Includes plastic pocket clip
Starrett Steel Self Adhesive Measuring Tape Left-to-Right 6 Feet
Measure stix is manufactured with high quality precision steel for extended service use. It is produced with a permanent adhesive backing that will stick to almost any work surface providing convenient, at-a-glance measurements. They can be mounted on work benches, saw tables, drafting tables, and more.
- Manufactured of high quality precision steel for extended service use
- Produced with permanent adhesives back that sticks to almost any work surface for convenient, at-a-glance measurements
- Mounts on work benches, saw tables, drafting tables, etc.
- Easily cut to size with scissors
Crescent Comfort Grip Adjustable Wrench 12 Inch
Crescent, the original adjustable wrench, alleviates the aggravating trial-and-error on the job site. With innovations like the off-corner loading and the 1-degree slope, we provide jaws that are fast-fitting, won't snag, and won't round your fasteners.
- Quick-Fit-Jaw with 1-degree slope and contoured lead-ins
- Extra-wide, flared beam for superior comfort
- Laser-etched markings make it easier to adjust to any fastener size - SAE or Metric
- Surround helps prevent accidental back-off
Milwaukee 1 Inch Mini Tubing Cutter
Milwaukee mini copper tubing cutter is designed to be the most durable mini cutter on the market. Featuring a proprietary adjustment mechanism, Milwaukee mini tubing cutters are engineered for 5X longer life. For added durability and extended performance, chrome rollers provide best in class rust protection. The easy grip knob allows faster adjustment and easier use. Pipe capacity: 1/8 Inch to 1-1/8 Inch.
- Chrome rollers and easy grip knob
- Proprietary adjustment mechanism
- Pipe capacity: 1/8 Inch to 1-1/8 Inch
Channellock 3/8 In. Drive 72-Tooth Quick Release Ratchet
Channellock Quick Release Ratchet
- This Channellock quick release ratchet offers 72 teeth with a 5 deg (degree) swing for better performance in tight spaces.
- Not having a thick head makes it efficiently designed for practicality, making it easier to use in tight spaces.
- The ratchet features a textured band for greater gripping power.
- Constructed of chrome vanadium steel provides durability and strength.
- 3/8 In. Drive 72-Tooth.
Stanley Standard Soft Face Dead Blow Hammer 3Lbs.
Uni-Cast construction of non-ferrous materials eliminates sparking and won't absorb liquids. Soft faces prevent marring. The dead-blow function uses a steel shot to eliminate bounce back. The handle is reinforced with steel to provide strength and safety and to prevent breaking on overstrike.
- Dead Blow Hammer
- Uni-Cast construction of non-ferrous materials eliminates sparking
- Soft faces
- The handle is reinforced with steel to provide strength
- Weight: 3 Lbs.
Milwaukee 11-in-1 Multi-Bit Screwdriver
The 11-in-1 screwdriver includes the eight bits and three nut drivers most requested by professionals. The bit prevents bit wear from hardened screws and extends bit life when fastening specialty screws found in electrical boxes, conduit couplers, outlets, and other common job site fixtures. Visible ID markings allow for quick tool identification on the job site.
- 11-in-1 screwdriver with square drive
- Comfortable tri-lobe handle
- Wire bending hole
- Bend up to 12 gauge wire
Channellock Large Parts Storage Box
This large bin organizer includes 8 large bins and 1 small removable bin. Polypropylene bottom and bins. Polycarbonate clear lid. They are sealed for water resistance. Aluminum front and side latches. Side latches interlock together to allow for stacking multiple organizers.
- Bin Organizer
- 9 bins with polycarbonate transparent lid
- Built with impact-resistant polymers
- Side latches interlock for stacking purposes
- Water-resistant
- Dimensions: 18" x 14-3/4" x 3-1/8"
CLEARANCE SALE!
Romex 12-2 Solid Yellow NMW/G Electrical Wire, 250′
This reliable roll of Romex 12-2 Solid Yellow NMW/G Electrical Wire is designed for durability and easy installation. It delivers consistent performance for interior branch circuits and general household wiring making it ideal for both renovations and new construction. This trusted cable ensures safe, efficient power distribution throughout your home.
- Safe for interior dry locations, featuring a durable PVC jacket for added protection
- Perfect for larger projects, offering flexibility and reduced need for splicing
- Approved for service to 600 volts
- Flame-retardant and crush-resistant
Arteferro Square Design Panel 4-17/32″W x 39-3/8″H
These Arteferro Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. This Modern Panel has a square design and features a 39-3/8" height that would truly assist with making a wrought iron project upscale. Whether it’s the decorative iron gate entry, wrought iron door, or part of the focal point as you gaze at the wrought-iron balcony the options are numerous.
- Design/Style: Square Design Panel
- Italian-designed
- Material: Wrought Iron
- Size: 4-17/32"W 39-3/8"H
Wrought Iron Rosette (33/1), 9-13/16 Inch (D)
These Arteferro Wrought Iron components are uniquely Italian-designed, hand crafted with finely forged details. Iron rosettes are a perfect complement to iron railings, old door, wall partitions, metal furniture, iron gates etc.
Design/Style: Rosette
Selection Size: 15/32" X 1/4"
Diameter: 9-13/16"
Weight: 2.4lbs
Material: Wrought Iron
Arteferro Rosette Wrought Iron 18-5/16 Inch
These Arteferro Rosette Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. They are a perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates etc.
- Design/Style: Rosette
- Italian-designed
- Material: Wrought Iron
- Size: 18-5/16"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Amanco Gutter Slip Joint
Used to facilitate the collection of rain water from rooftop, this gutter is used to join together two guttering channels of more than 6 meters. It is constructed from PVC material for durability and corrosion resistance. It is easy to install and helps to protect a building's walls, window frames, foundation and people.
- Joins two guttering channels together
- Durable
- Corrosion resistant
- Easy to install
- Protects walls, window frames, people and more
Wrought Iron Leaf Stamped (136/10) Right Hand, 2-3/4 Inch (W) X 6-5/16 Inch (H)
These Arteferro Wrought Iron components are uniquely Italian-designed, hand crafted with finely forged details. Arteferro's flowers and ornaments are the perfect complement to wrought iron railings, wrought iron garden art or metal home accessories. Select from things like forged grapes, leaves, stamped leaves, or flowers to create a natural, wrought iron charm.
Design/Style: Flowers and Ornaments
Selection Size: 1/8"
Width: 2-3/4"
Height: 6-5/16"
Weight: 0.3 lbs
Material: Wrought Iron
Wrought Iron Rosette (24/B/1), 18-1/8 Inch (D)
These Arteferro Wrought Iron components are uniquely Italian-designed, hand crafted with finely forged details. Iron rosettes are a perfect complement to iron railings, old door, wall partitions, metal furniture, iron gates etc.
Design/Style: Rosette
Selection Size: 1/2" X 1/4"
Diameter: 18-1/8"
Weight: 4.4lbs
Material: Wrought Iron
Bussmann 30A BP/SL Time-Delay Plug Fuse (3-Pack)
Bussmann 30A BP/SL Time-Delay Plug Fuse is designed for residential and light commercial applications, this fuse provides dependable overload protection while allowing for temporary inrush currents, preventing unnecessary fuse blowouts. Ideal for protecting motor-driven appliances and power tools.
- Time-delay design prevents nuisance tripping from temporary surges
- Compatible with Edison-base fuse holders for easy installation
- Rated for up to 125 volts, providing dependable household circuit protection
Arteferro S-Scroll With Grape 14-1/2 x 35-7/16 Inch
These Arteferro S-Scroll Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. This Ornate Panel has decorative grapes and flowers and features a 35-7/16" height. They are a perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates etc.
- Design/Style: S-Scroll With Grapes
- Italian-designed
- Material: Wrought Iron
- Size: 14-1/2" x 35-7/16"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Arteferro Flat Bar Raw Forged Collar Banding Bar Stock 12 Feet
These Arteferro wrought iron components are uniquely Italian-design, handcrafted out of wrought iron with finely forged details. wrought iron components compliment any traditional or modern commercial or home design weather. By combining other designs, you can create a fence, stair or balcony railing that will make your project unique.
- Design/Style: Flat Bar Raw Forged Collar
- Italian-designed
- Material: Wrought Iron
- Size: 9/16" X 1-5/32" 12'L
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
RCA 24-2 Stranded Speaker Wire, 100′
The RCA 100 Ft. 24-2 Stranded Speaker Wire is designed to deliver clear, reliable sound for home or professional installations. Its flexible stranded construction ensures easy routing around corners and tight spaces, making it ideal for speakers, amplifiers, and surround-sound systems.
- High-quality stranded copper wire for improved signal transmission and consistent audio performance
- Durable 100 ft. length provides ample reach for large rooms, multi-speaker setups, or custom installations
- Flexible, easy-strip insulation allows quick, hassle-free connections for both DIY users and professionals
Arteferro Picket Wrought Iron 1/2 Inch Square With Single Bronze Basket
Arteferro Wrought Iron Pickets are one of the most important elements of the infill in a balustrade or fencing. The classic design displays refined taste structures and has the potential to add a little more uniqueness and variety to your wrought iron staircase or railing.
- Design/Style: Pickets
- Size: 1/2″ square
- Material: Wrought Iron
- Single-basket design
- Colour: Bronze
- Adds a little more uniqueness and variety to your wrought iron staircase or railing
Amanco Gutter Rectangle Outlet
Amanco Gutter Rectangle Outlet can be used to connect 5 in. aluminum gutters to downspouts and elbows. To install, attach the gutter end with screws or pop rivets (not included) and use a seamer to attach to the gutter (not included). The Rectangle Gutter Outlet connects the gutter to the downspout, ensuring a snug fit to avoid leaking.
- Rectangle Gutter Outlet
- Aluminum construction for durability
- Use to connect gutters to downspouts and elbows
- Attach with screws or pop rivets (not included) and use connectors (not included) to join to gutter
Arteferro Forged Left Hand Leaf, (7-7/8″ x 5-7/8″ x 1/2″)
These Arteferro Forged Left Hand Leaf Wrought Iron Raw components are uniquely Italian-designed, handcrafted with finely forged details. This Metal Art Leaf has a leaf design and features a 7-7/8" height. They are a perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates etc.
- Design/Style: Forged Left Hand Leaf
- Italian-designed
- Material: Wrought Iron
- Size: 7-7/8" x 5-7/8" x 1/2"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Arteferro Stamped Raw Leaf 3/16 Inch
These Arteferro Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. Stamped wrought iron leaves have always been an inexpensive way to create simplistic or even sophisticated pieces of metal art. They would make excellent choices when looking to top off a wrought iron fence or gate.
- Design/Style: Stamped Raw Leaf
- Italian-designed
- Material: Wrought Iron
- Size: 4-15/16" x 3-9/16" x 3/16"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Wrought Iron Rosette (24/3), 23-5/8 Inch (D)
These Arteferro Wrought Iron components are uniquely Italian-designed, hand crafted with finely forged details. Iron rosettes are a perfect complement to iron railings, old door, wall partitions, metal furniture, iron gates etc.
Design/Style: Rosette
Selection Size: 1/2"
Diameter: 23-5/8"
Weight: 13lbs
Material: Wrought Iron
Arteferro Brass Stamped Leaf, (2-3/4″)
These Arteferro Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. Stamped wrought iron leaves have always been an inexpensive way to create simplistic or even sophisticated pieces of metal art. They would make excellent choices when looking to top off a wrought iron fence or gate.
- Design/Style: Stamped Raw Leaf
- Italian-designed
- Material: Wrought Iron
- Size: 2-3/8" H x 2-3/4" W
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
RCA16-2 Stranded Speaker Wire, 50′
The RCA 50 Ft. 16-2 Stranded Speaker Wire is designed for home audio systems, surround sound setups, and custom installations, this flexible wire ensures clear signal transmission and easy routing around corners and tight spaces.
- Durable 16-gauge stranded copper wire for optimal sound clarity and reduced signal loss
- Flexible, easy-to-install design ideal for home theaters, speakers, and custom audio layouts
- 50 ft. length provides ample reach for multiple speaker placements and larger rooms
Arteferro Raw Metal Stamped Leaf 2-33/64 x 7-7/8 Inch
These Arteferro Wrought Iron components are uniquely Italian-designed, handcrafted with finely forged details. Stamped wrought iron leaves have always been an inexpensive way to create simplistic or even sophisticated pieces of metal art. They would make excellent choices when looking to top off a wrought iron fence or gate.
- Design/Style: Raw Metal Stamped Leaf
- Italian-designed
- Material: Wrought Iron
- Size: 2-33/64" x 7-7/8"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Arteferro Left Hand Forged Leaf Wrought Iron Raw 7-1/16 x 5-1/8 x 5/32 Inch
These Arteferro Left Hand Forged Leaf Wrought Iron Raw components are uniquely Italian-designed, handcrafted with finely forged details. This Metal Art Leaf has a leaf design and features a 7 1/16" height. They are a perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates etc.
- Design/Style: Left Hand Forged Leaf
- Italian-designed
- Material: Wrought Iron
- Size: 7-1/16" x 5-1/8" x 5/32"
- A perfect complement to iron railings, old doors, wall partitions, metal furniture, iron gates, etc.
Romex 14-3 Solid NMW/G Electrical Wire, White 250′
Romex 14-3 Solid NMW/G Electrical Wire is designed for reliable residential and light commercial wiring applications. It's designed with durable PVC insulation and a grounded three-conductor. This cable delivers consistent performance for switches, outlets, and lighting circuits.
- Durable Construction
- Ideal for household branch circuits, lighting, and general wiring projects.
- Easy Identification
- Approved for service to 600 volts
- Flame-retardant and crush-resistant
Wrought Iron Spear Point (124/3) Stamped Base, 4-7/8 Inch (H)
These Arteferro Wrought Iron components are uniquely Italian-designed, hand crafted with finely forged details. Arteferro's flowers and ornaments are the perfect complement to wrought iron railings, wrought iron garden art or metal home accessories. Select from things like forged grapes, leaves, stamped leaves, or flowers to create a natural, wrought iron charm.
Design/Style: Spear Point Stamped Base
Selection Size: 1/2" dia.
Height: 4-7/8"
Weight: 0.3lbs
Material: Wrought Iron
